Skip to Content
Last modified by Scott Kohlmann on 2023/04/20 22:37
From version 5.1
edited by Scott Kohlmann
on 2021/12/14 22:34
Change comment: There is no comment for this version
To version 3.1
edited by Mark Kohlmann
on 2020/04/09 18:43
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.scott\.kohlmann@chiefintegrations\.com
1 +XWiki.MarkKohlmann
Content
... ... @@ -25,37 +25,32 @@
25 25  * Double click the PUF to install ShowRunner (works best with Toolbox closed)
26 26  * Select the PUF file again if needed, connect to the processor using the pencil, and select Recheck (This verifies the need to install the program, the XPanel UI, and the Crestron App UI)
27 27  * Click Update when prompted to install ShowRunner
28 -* After loading, you can connect to the UI by navigating to the processor’s IP.  
29 -** 3-Series processors require authentication enabled or SSL self
30 -** If stuck on "Connecting to Processor" you will need to accept the certificate.
31 -* Showrunner™ will be loaded but a configuration and license are still needed.  Please proceed with the next section.
28 +* After loading, you can connect to the UI by navigating to the processor’s IP using any internet browser that supports Adobe Flash (Adobe Flash is required for Crestron’s xPanel)
29 +** If only a white screen is shown, navigate to “http:~/~/(ProcessorIpAddress)/core3xpanel.html” to force the UI path
30 +* ShowRunner will be loaded but a configuration and license are still needed.  Please proceed with the next section.
32 32  
33 33  === License and Configuration Deployment ===
34 34  
35 35  * Download the configuration file from the link provided by Chief Integrations
36 36  * Obtain and download the license from [[https:~~/~~/portal.chiefintegrations.com>>url:https://portal.chiefintegrations.com]]
37 -* Navigate to the showrunner™ management page
38 -* Login to the showrunnerHUB™
39 -** 4-Series: The login created by the processor will work
40 -** 3-Series: Using Toolbox Text Console - type "sradmin [username] [name] administrators [password]
41 -* Click Setup then File Management
42 -* [[image:MicrosoftTeams-image7c355557d0a3ae410e72498ee667de2df50226f3e3940c2df4b51bb7137e176b.png||height="240" width="250"]]
36 +* Navigate to the ShowRunner management page
37 +“http:~/~/(ProcessorIpAddress)/cws/showrunner/main” in your browser
38 +* Click File Management
43 43  ** Under “Upload New License File”
44 -*** Leave restart unchecked after transfer
40 +*** Uncheck restart after transfer
45 45  *** Select “Choose File” find the license file you downloaded from the portal
46 46  *** Select “Upload”
47 47  ** Under “Upload New Config File”
48 -*** Select “Choose File” and find the provided SrConfig.json for this processor from the project link that was sent at project delivery.
44 +*** Select “Choose File” and find the provided CiLightingConfig.json for this processor from the project link that was sent at project delivery.
49 49  *** Select “Upload”
50 -*** Alternatively, you can drop the License.lic using Toolbox’s File Manager or your SFTP client into the NVRAM/sr folder of the processor, the SrConfig.json into NVRAM/sr/default and perform “progreset” from the processor’s console
46 +*** Alternatively, you can drop the License.lic and CiLightingConfig.json using Toolbox’s File Manager or your SFTP client into the NVRAM folder of the processor and perform “progreset” from the processor’s console
51 51  *** The program will restart
52 52  * Wait about 45 seconds after loading the configuration for the program to restart completely
53 53  
54 54  === TSW Setup (Per Panel) ===
55 55  
56 -* Set the TSW 770's IP Address per your network requirements (If using a panel other than TSW-770 you will need the CI_ShowRunner-UI_v3.xx PUF)
57 -* Connect the PUF (CI_ShowRunner_v3.xx) to the TSW to load the UI
58 -** Only add CI_ShowRunner-UI_v3.xx if using touch panel other than TSW-770. 
52 +* Set the TSW’s IP Address per your network requirements
53 +* Connect the PUF to the TSW to load the UI
59 59  * When finished, connect to the TSW with Text Console and type “addm 10 x.x.x.x” to link the panel to the processor (where x.x.x.x is the processor’s IP or hostname [DHCP/DNS])
60 60  ** You can also edit the IP table from Toolbox or the touchpanel’s setup screen.  IP-IDs 10 and 11 are reserved for TSWs by default.  If you have more than 2 touchpanels the additional IP-IDs will be provided.
61 61  
MicrosoftTeams-image7c355557d0a3ae410e72498ee667de2df50226f3e3940c2df4b51bb7137e176b.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.scott\.kohlmann@chiefintegrations\.com
Size
... ... @@ -1,1 +1,0 @@
1 -19.5 KB
Content