Wiki source code of ShowRunner BACnet

Version 9.1 by Mark Kohlmann on 2021/06/16 17:42

version	line-number	content
9.1	1	ShowRunner uses Crestron's BACnet stack and is bound by its licensing and limits. ShowRunner's BACnet feature is licensed. Integrations of 50 points or less may use the free Crestron BACNET license. More than 50 points require the Crestron paid license and total points are limited by the platform. The processor itself consumes a point. BACnet points are assigned during commissioning. A csv export of the points may be downloaded from the system.
2.1	2
3.1	3	=== Crestron BACnet Stack Details ===
2.1	4
	5	\|=Control System\|=Max # of Objects
	6	\|(((
	7	* FT-TSC600 (Not Supported by SR)
	8	* TPCS-4SM (Not Supported by SR)
	9	* TPCS-4SMD (Not Supported by SR)
	10	* TSCW-730 (Not Supported by SR)
	11	)))\|250
	12	\|(((
	13	* DIN-AP3
7.1	14	* DIN-AP4
2.1	15	* DIN-AP3MEX
	16	* MC3 (Not Supported by SR)
	17	* RMC3
7.1	18	* RMC4
2.1	19	)))\|500
	20	\|(((
	21	* CP3
7.1	22	* CP4
2.1	23	* CP3N
7.1	24	* CP4N
2.1	25	)))\|1000
	26	\|(((
	27	* AV3
7.1	28	* AV4
2.1	29	* PRO3
7.1	30	* PRO4
2.1	31	)))\|2000
	32
	33	[[Crestron PICS Statement>>attach:Crestron_PICS.PDF]]
	34
	35	=== ShowRunner BACNET Points ===
	36
6.1	37	AreaBaseIDs are assigned automatically and maintained. Points are discoverable. Each of the points may be enabled or disabled by area to optimize the integration. This the default ShowRunner BACnet mode.
2.1	38
8.1	39	\|=Feature\|=Description\|=Type\|=Point\|=Label\|=R/W\|=Units
	40	\|Area Scene\|Current Scene Active on the Area\|MV\|AreaBaseID\|{AreaId}:{AreaName} Scene\|RW\|Scene
	41	\|Occupancy Mode\|Current Occupancy Mode for the Area\|MV\|AreaBaseID + 2\|{AreaId}:{AreaName} Occupancy Mode\|RW\|Mode
	42	\|Occupancy Status\|Current Occupancy Status for the Area\|BI\|AreaBaseID + 1\|{AreaId}:{AreaName} Occupied\|R\|Boolean
	43	\|Loads\|Individual Load intensities for each Load in the Area\|AV\|AreaBaseID + 1000 + LoadIndex\|{AreaId}:{AreaName} Load{LoadId}:{LoadName}\|RW\|Percentage
	44	\|Photocell Level\|Photocell sensor reading for each Photocell in the Area\|AI\|AreaBaseID + 100 + PhotocellIndex\|{AreaId}:{AreaName} Photocell{PhotocellId}:{PhotocellName}\|R\|Percentage
2.1	45
5.1	46	=== Zum Floor Hub BACnet Point Emulation ===
	47
8.1	48	ShowRunner can emulate the Zum Floor Hubs BACnet points as an alternative to the standard ShowRunner mode. Each point may be enabled/disabled individually by Area.
5.1	49
	50	Set the following Area properties:
	51
	52	{{{BACnetIndex: (ID of the Room, this number of multiplied times 2048 to get the BACnet points, start at 1)
	53	BACnetMode: "ZumEmulation"}}}
	54
	55
	56	\|=Feature\|=(% style="width: 149px;" %)Type\|=(% style="width: 341px;" %)Point\|=Label\|=Description\|=R/W\|=Units
	57	\|Area Scene\|(% style="width:149px" %)MV\|(% style="width:341px" %)AreaBaseID + 8\|{AreaName}>{AreaId}>ActiveScene>BI\|View or change the current scene. Off scene is 17, Scenes 1 through 16 depend on area configuration.\|RW\|Scene
	58	\|Occupancy Mode\|(% style="width:149px" %)BV\|(% style="width:341px" %)AreaBaseID + 6\|{AreaName}>{AreaId}>OccupancySensorEnabled>BV\|Enable or disable the occupancy sensor. Enable will activate the last occupancy/vacancy mode.\|RW\|Boolean
	59	\|Occupancy Status\|(% style="width:149px" %)BI\|(% style="width:341px" %)AreaBaseID + 2\|{AreaName}>{AreaId}>RoomOccupied>BI\|Current room occupancy state\|R\|Boolean
	60	\|Online\|(% style="width:149px" %)BI\|(% style="width:341px" %)AreaBaseID\|{AreaName}>{AreaId}>RoomOnline>BI\|Current room online state, this is fixed as true.\|R\|Boolean
	61	\|On\|(% style="width:149px" %)BI\|(% style="width:341px" %)AreaBaseID + 1\|{AreaName}>{AreaId}>RoomOn>BI\|Current room load state. If any load is on this will be true.\|R\|Boolean
	62
	63	{{{AreaBaseID = BACnetIndex * 2048}}}