Wiki source code of ShowRunner BACnet

Version 20.1 by Alexander Mott on 2022/07/01 18:31

version	line-number	content
20.1	1	SHOWRUNNER™ uses Crestron's BACnet stack and is bound by its licensing and limits. SHOWRUNNER's BACnet feature is licensed, a license from Chief Integrations is required. Integrations of 50 points or less may use the free Crestron BACnet license. More than 50 points require the Crestron paid license and total points are limited by the platform (ZUM-HUB4 processors include a BACnet license, but require a separate license from Crestron to enable SHOWRUNNER™ installation on the processor). The processor itself consumes a point. BACnet points are assigned during commissioning. A .csv export of the points may be downloaded from the system.
2.1	2
19.1	3	BACnet Stack Features:
18.1	4
19.1	5	* Configurable BACnet port
	6	* BBMD w/ Foreign Device Registration (Enabled if necessary)
	7	* Points can be discovered using traditional BACnet discovery tools
	8
3.1	9	=== Crestron BACnet Stack Details ===
2.1	10
13.1	11	\|=Control System\|=Max # of Points
2.1	12	\|(((
	13	* FT-TSC600 (Not Supported by SR)
	14	* TPCS-4SM (Not Supported by SR)
	15	* TPCS-4SMD (Not Supported by SR)
	16	* TSCW-730 (Not Supported by SR)
	17	)))\|250
	18	\|(((
	19	* DIN-AP3
7.1	20	* DIN-AP4
2.1	21	* DIN-AP3MEX
	22	* MC3 (Not Supported by SR)
13.1	23	* MC4
2.1	24	* RMC3
7.1	25	* RMC4
2.1	26	)))\|500
	27	\|(((
	28	* CP3
7.1	29	* CP4
2.1	30	* CP3N
7.1	31	* CP4N
2.1	32	)))\|1000
	33	\|(((
	34	* AV3
7.1	35	* AV4
2.1	36	* PRO3
7.1	37	* PRO4
2.1	38	)))\|2000
20.1	39	\|(((
	40	* ZUM-HUB4
	41	)))\|10,000
2.1	42
	43	[[Crestron PICS Statement>>attach:Crestron_PICS.PDF]]
	44
17.1	45	=== ShowRunner BACnet Points ===
2.1	46
17.1	47	==== Area BACnet Points ====
10.1	48
20.1	49	Provides control/status for a single area within SHOWRUNNER™. AreaBaseIDs are assigned automatically and maintained. Points are discoverable. Each of the points may be enabled or disabled by area to optimize the integration. This is the default SHOWRUNNER™ BACnet mode.
2.1	50
8.1	51	\|=Feature\|=Description\|=Type\|=Point\|=Label\|=R/W\|=Units
	52	\|Area Scene\|Current Scene Active on the Area\|MV\|AreaBaseID\|{AreaId}:{AreaName} Scene\|RW\|Scene
	53	\|Occupancy Mode\|Current Occupancy Mode for the Area\|MV\|AreaBaseID + 2\|{AreaId}:{AreaName} Occupancy Mode\|RW\|Mode
	54	\|Occupancy Status\|Current Occupancy Status for the Area\|BI\|AreaBaseID + 1\|{AreaId}:{AreaName} Occupied\|R\|Boolean
13.1	55	\|Area Intensity\|Current Area Average Intensity/Load Level (v3.010 or later)\|AV\|AreaBaseID + 3\|{AreaId}:{AreaName} Intensity\|RW\|Percentage
	56	\|Area Power\|Current Area Power Consumption in Watts (Requires EM License & v3.010 or later)\|AI\|AreaBaseID + 4\|{AreaId}:{AreaName} Power\|R\|Watts
8.1	57	\|Loads\|Individual Load intensities for each Load in the Area\|AV\|AreaBaseID + 1000 + LoadIndex\|{AreaId}:{AreaName} Load{LoadId}:{LoadName}\|RW\|Percentage
	58	\|Photocell Level\|Photocell sensor reading for each Photocell in the Area\|AI\|AreaBaseID + 100 + PhotocellIndex\|{AreaId}:{AreaName} Photocell{PhotocellId}:{PhotocellName}\|R\|Percentage
2.1	59
17.1	60	==== Global BACnet Points ====
10.1	61
	62	\|=Feature\|=Description\|=Type\|=Point\|=Label\|=R/W\|=Units
	63	\|Master Override\|Activates or Deactivates Master Override System Wide\|BV\|10\|Master Override\|RW\|Boolean
	64	\|Demand Response\|Activates or Deactivates Demand Response\|BV\|11\|Demand Response\|RW\|Boolean
16.1	65	\|Normal / After Hours\|Changes System State between Normal and After Hours\|MV\|12\|Normal / After Hours\|RW\|(((
	66	1: Normal
	67	2: After Hours
	68	)))
10.1	69	\|Device Offline Count\|Indicates the number of devices that are offline\|AV\|20\|Device Offline Count\|R\|Integer
	70	\|Alarm\|Indicates a critical failure, see user interface for more information\|BV\|21\|Alarm\|R\|Boolean
	71
20.1	72	=== Zūm Floor Hub BACnet Point Emulation ===
5.1	73
20.1	74	SHOWRUNNER™ can emulate the Zūm Floor Hubs BACnet points as an alternative to the standard SHOWRUNNER™ mode. Each point may be enabled/disabled individually by Area.
5.1	75
	76	Set the following Area properties:
	77
	78	{{{BACnetIndex: (ID of the Room, this number of multiplied times 2048 to get the BACnet points, start at 1)
	79	BACnetMode: "ZumEmulation"}}}
	80
	81
	82	\|=Feature\|=(% style="width: 149px;" %)Type\|=(% style="width: 341px;" %)Point\|=Label\|=Description\|=R/W\|=Units
	83	\|Area Scene\|(% style="width:149px" %)MV\|(% style="width:341px" %)AreaBaseID + 8\|{AreaName}>{AreaId}>ActiveScene>BI\|View or change the current scene. Off scene is 17, Scenes 1 through 16 depend on area configuration.\|RW\|Scene
	84	\|Occupancy Mode\|(% style="width:149px" %)BV\|(% style="width:341px" %)AreaBaseID + 6\|{AreaName}>{AreaId}>OccupancySensorEnabled>BV\|Enable or disable the occupancy sensor. Enable will activate the last occupancy/vacancy mode.\|RW\|Boolean
	85	\|Occupancy Status\|(% style="width:149px" %)BI\|(% style="width:341px" %)AreaBaseID + 2\|{AreaName}>{AreaId}>RoomOccupied>BI\|Current room occupancy state\|R\|Boolean
	86	\|Online\|(% style="width:149px" %)BI\|(% style="width:341px" %)AreaBaseID\|{AreaName}>{AreaId}>RoomOnline>BI\|Current room online state, this is fixed as true.\|R\|Boolean
	87	\|On\|(% style="width:149px" %)BI\|(% style="width:341px" %)AreaBaseID + 1\|{AreaName}>{AreaId}>RoomOn>BI\|Current room load state. If any load is on this will be true.\|R\|Boolean
	88
	89	{{{AreaBaseID = BACnetIndex * 2048}}}