Wiki source code of ShowRunner BACnet
Version 12.2 by Mark Kohlmann on 2021/07/14 16:25
Show last authors
| author | version | line-number | content |
|---|---|---|---|
| 1 | ShowRunner uses Crestron's BACnet stack and is bound by its licensing and limits. ShowRunner's BACnet feature is licensed. Integrations of 50 points or less may use the free Crestron BACNET license. More than 50 points require the Crestron paid license and total points are limited by the platform. The processor itself consumes a point. BACnet points are assigned during commissioning. A csv export of the points may be downloaded from the system. | ||
| 2 | |||
| 3 | === Crestron BACnet Stack Details === | ||
| 4 | |||
| 5 | |=Control System|=Max # of Objects | ||
| 6 | |((( | ||
| 7 | * FT-TSC600 (Not Supported by SR) | ||
| 8 | * TPCS-4SM (Not Supported by SR) | ||
| 9 | * TPCS-4SMD (Not Supported by SR) | ||
| 10 | * TSCW-730 (Not Supported by SR) | ||
| 11 | )))|250 | ||
| 12 | |((( | ||
| 13 | * DIN-AP3 | ||
| 14 | * DIN-AP4 | ||
| 15 | * DIN-AP3MEX | ||
| 16 | * MC3 (Not Supported by SR) | ||
| 17 | * RMC3 | ||
| 18 | * RMC4 | ||
| 19 | )))|500 | ||
| 20 | |((( | ||
| 21 | * CP3 | ||
| 22 | * CP4 | ||
| 23 | * CP3N | ||
| 24 | * CP4N | ||
| 25 | )))|1000 | ||
| 26 | |((( | ||
| 27 | * AV3 | ||
| 28 | * AV4 | ||
| 29 | * PRO3 | ||
| 30 | * PRO4 | ||
| 31 | )))|2000 | ||
| 32 | |||
| 33 | [[Crestron PICS Statement>>attach:Crestron_PICS.PDF]] | ||
| 34 | |||
| 35 | === ShowRunner BACNET Points === | ||
| 36 | |||
| 37 | ==== Area BACNET Points ==== | ||
| 38 | |||
| 39 | AreaBaseIDs are assigned automatically and maintained. Points are discoverable. Each of the points may be enabled or disabled by area to optimize the integration. This the default ShowRunner BACnet mode. | ||
| 40 | |||
| 41 | |=Feature|=Description|=Type|=Point|=Label|=R/W|=Units | ||
| 42 | |Area Scene|Current Scene Active on the Area|MV|AreaBaseID|{AreaId}:{AreaName} Scene|RW|Scene | ||
| 43 | |Occupancy Mode|Current Occupancy Mode for the Area|MV|AreaBaseID + 2|{AreaId}:{AreaName} Occupancy Mode|RW|Mode | ||
| 44 | |Occupancy Status|Current Occupancy Status for the Area|BI|AreaBaseID + 1|{AreaId}:{AreaName} Occupied|R|Boolean | ||
| 45 | |Loads|Individual Load intensities for each Load in the Area|AV|AreaBaseID + 1000 + LoadIndex|{AreaId}:{AreaName} Load{LoadId}:{LoadName}|RW|Percentage | ||
| 46 | |Photocell Level|Photocell sensor reading for each Photocell in the Area|AI|AreaBaseID + 100 + PhotocellIndex|{AreaId}:{AreaName} Photocell{PhotocellId}:{PhotocellName}|R|Percentage | ||
| 47 | |||
| 48 | ==== Global BACNET Points ==== | ||
| 49 | |||
| 50 | |=Feature|=Description|=Type|=Point|=Label|=R/W|=Units | ||
| 51 | |Master Override|Activates or Deactivates Master Override System Wide|BV|10|Master Override|RW|Boolean | ||
| 52 | |Demand Response|Activates or Deactivates Demand Response|BV|11|Demand Response|RW|Boolean | ||
| 53 | |Device Offline Count|Indicates the number of devices that are offline|AV|20|Device Offline Count|R|Integer | ||
| 54 | |Alarm|Indicates a critical failure, see user interface for more information|BV|21|Alarm|R|Boolean | ||
| 55 | |||
| 56 | === Zum Floor Hub BACnet Point Emulation === | ||
| 57 | |||
| 58 | ShowRunner can emulate the Zum Floor Hubs BACnet points as an alternative to the standard ShowRunner mode. Each point may be enabled/disabled individually by Area. | ||
| 59 | |||
| 60 | Set the following Area properties: | ||
| 61 | |||
| 62 | {{{BACnetIndex: (ID of the Room, this number of multiplied times 2048 to get the BACnet points, start at 1) | ||
| 63 | BACnetMode: "ZumEmulation"}}} | ||
| 64 | |||
| 65 | |||
| 66 | |=Feature|=(% style="width: 149px;" %)Type|=(% style="width: 341px;" %)Point|=Label|=Description|=R/W|=Units | ||
| 67 | |Area Scene|(% style="width:149px" %)MV|(% style="width:341px" %)AreaBaseID + 8|{AreaName}>{AreaId}>ActiveScene>BI|View or change the current scene. Off scene is 17, Scenes 1 through 16 depend on area configuration.|RW|Scene | ||
| 68 | |Occupancy Mode|(% style="width:149px" %)BV|(% style="width:341px" %)AreaBaseID + 6|{AreaName}>{AreaId}>OccupancySensorEnabled>BV|Enable or disable the occupancy sensor. Enable will activate the last occupancy/vacancy mode.|RW|Boolean | ||
| 69 | |Occupancy Status|(% style="width:149px" %)BI|(% style="width:341px" %)AreaBaseID + 2|{AreaName}>{AreaId}>RoomOccupied>BI|Current room occupancy state|R|Boolean | ||
| 70 | |Online|(% style="width:149px" %)BI|(% style="width:341px" %)AreaBaseID|{AreaName}>{AreaId}>RoomOnline>BI|Current room online state, this is fixed as true.|R|Boolean | ||
| 71 | |On|(% style="width:149px" %)BI|(% style="width:341px" %)AreaBaseID + 1|{AreaName}>{AreaId}>RoomOn>BI|Current room load state. If any load is on this will be true.|R|Boolean | ||
| 72 | |||
| 73 | {{{AreaBaseID = BACnetIndex * 2048}}} |