Skip to Content

Changes for page Shades Integrations

Last modified by Alexander Mott on 2024/06/17 18:07
From version 5.3
edited by Alexander Mott
on 2024/06/14 22:06
Change comment: (Autosaved)
To version 5.2
edited by Alexander Mott
on 2024/06/14 22:01
Change comment: (Autosaved)

Summary

Details

Page properties
Content
... ... @@ -92,18 +92,12 @@
92 92  
93 93  == Contact Closure (Relays) ==
94 94  
95 -ShowRunnerCLC™ can use output relays on Crestron hardware to control shades provided that the shades controller is capable of accepting a contact closure input for third-party control of the shades.
95 +ShowRunnerCLC™ can use output relays on Crestron hardware to control shades provided that the shades controller is capable of accepting a contact closure input
96 96  
97 -=== Hardware Requirements ===
97 +=== Supported Hardware ===
98 98  
99 -* Two relays must be available for each shade controller
100 -* It is recommended that shade interfaces be installed as close as possible to the Crestron relays controlling them to prevent issues from voltage drop or EMF in the wiring between the relay and the shade interface
101 -
102 102  === Information Requirements ===
103 103  
104 -* (Required) Quantity and location of Crestron devices to be used for contact closure shade control
105 -* (Required) Quantity and location of shades to be controlled
106 -
107 107  == Draper IntelliFlex I/O A\V Gateway ==
108 108  
109 109  (% class="wikigeneratedid" %)