Skip to Content

Changes for page Shades Integrations

Last modified by Alexander Mott on 2024/06/17 18:07
From version 2.4
edited by Alexander Mott
on 2024/06/14 21:17
Change comment: (Autosaved)
To version 5.3
edited by Alexander Mott
on 2024/06/14 22:06
Change comment: (Autosaved)

Summary

Details

Page properties
Content
... ... @@ -17,16 +17,45 @@
17 17  
18 18  ShowRunnerCLC™ provides native support for most Crestron shade controllers as well as integration with shades controlled from third-party Crestron processors via Ethernet Inter-Systems Communication (EISC). If integration with a Crestron shades controller or system that is not detailed below is required, reach out to Chief Integrations directly to see about potentially adding support to ShowRunnerCLC™.
19 19  
20 -== C2N-SDC(-DC) ==
20 +== Supported Hardware ==
21 21  
22 -== CSA-PWS10S-HUB-ENET ==
22 +ShowRunnerCLC™ includes support for the following Crestron shade controllers:
23 23  
24 -== DIN-2MC2 ==
24 +* C2N-SDC and C2N-SDC-DC
25 +* CSC Series Controllers (discontinued)
26 +* CSA-PWS10S-HUB-ENET (controlling QMT-series motors)
27 +* DIN-2MC2
28 +* Ethernet Inter-System Communications (Crestron-to-Crestron)
25 25  
26 -== Ethernet Inter-Systems Communication (EISC) ==
30 +For any integrations over Ethernet, the lighting network must be configured such that the lighting control processor running ShowRunnerCLC™ can communicate with all required hardware.
27 27  
28 -= Third-Party Shade Controllers =
32 +== Information Required ==
29 29  
34 +In order to fully define shades in the ShowRunnerCLC™ configuration, the following information must be provided by the Agent. Incomplete information will result in incomplete hardware definitions in the shipped ShowRunnerCLC™ configuration.
35 +
36 +Non-EISC shades:
37 +
38 +* **(Required)** Quantity of shade controllers
39 +* **(Required)** Quantity and location of each shade motor to be controlled
40 +** For all controllers, we must know which shade motor (i.e. window and room) is connected to each output
41 +** For systems with multiple CSA-PSW10S-HUB-ENET, we must know which HUB is the Cresnet primary
42 +
43 +EISC shades:
44 +
45 +* **(Required)** Type of EISC integration (TCP or UDP)
46 +* **(Required)** IP Address and IP-ID of non-ShowRunnerCLC™ processor
47 +* **(Required) **Joins to be used for shade control and feedback (see table below; not all features are required for all integrations)
48 +
49 +(% style="width:632px" %)
50 +|=Join|=(% style="width: 344px;" %)Description|=(% style="width: 6px;" %)Type|=(% style="width: 101px;" %)Direction
51 +|JoinOpen|(% style="width:344px" %)Sends a digital pulse when open is triggered|(% style="width:6px" %)Digital|(% style="width:101px" %)To 3rd Party
52 +|JoinClose|(% style="width:344px" %)Sends a digital pulse when close is triggered|(% style="width:6px" %)Digital|(% style="width:101px" %)To 3rd Party
53 +|JoinStop|(% style="width:344px" %)Sends a digital pulse when stop is triggered|(% style="width:6px" %)Digital|(% style="width:101px" %)To 3rd Party
54 +|JoinPosition|(% style="width:344px" %)Sends an analog value when the position is changed (0-65535 = 0-100%)|(% style="width:6px" %)Analog|(% style="width:101px" %)To 3rd Party
55 +|JoinPositionFeedback|(% style="width:344px" %)Receives an analog value for the current shade position (0-65535 = 0-100%)|(% style="width:6px" %)Analog|(% style="width:101px" %)From 3rd Party
56 +
57 += Third-Party Shade Integrations =
58 +
30 30  ShowRunnerCLC™ supports integrating with a wide range of common shade control manufacturers, but this integration is not included in basic ShowRunnerCLC™ orders and requires the [[SR-SDN>>doc:showrunner™ Order Guide.showrunner™ Additional Features.Shades.SR-SDN.WebHome]] additional feature. If integration with a shades manufacturer or system that is not detailed below is required, reach out to Chief Integrations directly to see about potentially adding support to ShowRunnerCLC™.
31 31  
32 32  == Common Integration Methods ==
... ... @@ -63,6 +63,18 @@
63 63  
64 64  == Contact Closure (Relays) ==
65 65  
95 +ShowRunnerCLC™ can use output relays on Crestron hardware to control shades provided that the shades controller is capable of accepting a contact closure input for third-party control of the shades.
96 +
97 +=== Hardware Requirements ===
98 +
99 +* Two relays must be available for each shade controller
100 +* It is recommended that shade interfaces be installed as close as possible to the Crestron relays controlling them to prevent issues from voltage drop or EMF in the wiring between the relay and the shade interface
101 +
102 +=== Information Requirements ===
103 +
104 +* (Required) Quantity and location of Crestron devices to be used for contact closure shade control
105 +* (Required) Quantity and location of shades to be controlled
106 +
66 66  == Draper IntelliFlex I/O A\V Gateway ==
67 67  
68 68  (% class="wikigeneratedid" %)
... ... @@ -78,10 +78,10 @@
78 78  (% class="wikigeneratedid" id="HQuantumRS-232" %)
79 79  RS-232 or TelNet integration supported
80 80  
81 -== MechoNet Interface (MNI) ==
122 +== MechoNet Network Interface (MNI) ==
82 82  
83 83  (% class="wikigeneratedid" id="HMNIRS-232" %)
84 -Only RS-232 integration supported
125 +Only RS-232 integration supported (contact closure available if Mecho wall switch ports are not used)
85 85  
86 86  == Mecho SolarTrac4 ==
87 87