Ethernet Intersystem Communications Import (Crestron)

Loads, Occupancy Sensors, Photocells, Partition Sensors, and Keypads may be integrated over an EISC.  The EISC may be classic (packed) or 3-series TCP/IP.

Keypads

• Uses 1 serial join on the EISC
• Protocol is BXX:Y\r
  • XX is the button number, 00 to 16
  • Y is the action
    • Actions From Keypad to ShowRunnerCLC™
      • p = Press
      • t = Tap
      • dt = Double Tap
      • h = Hold
      • r = Release
      • Update (sents as "Update\r" without BXX: prefix) = Requests current feedback from ShowRunner
    • Actions From ShowRunnerCLC™ to the Keypad
      • on = Feedback Indicator On
      • off = Feedback Indicator Off
      • ClearFB (sent as "ClearFB\r" without BXX: prefix) = Clears all existing Keypad Feedback
• Examples:
  • When EISC comes online, keypad sends "Update\r" to request current button feedback, only buttons that are on will be returned.
  • When the user taps button 1 the following are sent in order (assuming, Press/Tap/DoubleTap/Hold signals are all wired up)
    • B01:p\r
    • B01:t\r
    • B01:r\r
  • Response when button 1 feedback goes on:
    • B01:on\r
  • Response when ShowRunnerCLC™ requests clearing of keypad feedback:
    • ClearFB\r