Skip to Content
Last modified by Mark Kohlmann on 2024/11/19 23:23
From version 7.1
edited by Mark Kohlmann
on 2021/12/22 21:36
Change comment: There is no comment for this version
To version 8.1
edited by Mark Kohlmann
on 2022/09/30 19:41
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -63,3 +63,37 @@
63 63  **** Area
64 64  ***** Scene Set and Feedback
65 65  *** Devices to be exported are defined in the configuration and are not changeable at run-time.
66 +
67 +==== VC-4 Specific Notes ====
68 +
69 +===== Prerequisites =====
70 +
71 +* VC-4 server installed
72 +* Recommended VC-4 server hardened per [[Crestron>>https://support.crestron.com/app/answers/detail/a_id/1001249/kw/harden%20VC-4]]
73 +** [[​​​​​​​>>https://support.crestron.com/app/answers/detail/a_id/1001249/kw/harden%20VC-4]]Will require SETCSAUTHENTICATION command on processor
74 +** VC-4 installer will need to provide username and password for processor to connect, this is used with SETCSAUTHENTICATION
75 +* showrunner running on a processor
76 +* EISC created in the showrunner config
77 +* AV program running on VC-4, AV programmer will need to provide the ROOM ID from VC-4
78 +
79 +===== showrunner Config Settings =====
80 +
81 +* Define EiscType in config: ##"EiscType": "VirtualControlEiscClient"##
82 +* Define Vc4RoomId in config: ##"Vc4RoomId": "VC4ROOMID"##
83 +* IpAddressOrHostname will not used, instead VCSERVERADDR will be used instead
84 +
85 +===== Processor Settings =====
86 +
87 +* Use console command VCSERVERADDR (or processor configuration pages) to add the VC-4 server IP address or hostname. Example: ##VCSERVERADDR my-vc-4-server.mycorpnet.com##
88 +* If security (hardening) is enabled use console command SETCSAUTHENTICATION to enroll the credentials used to login to VC-4. Example: ##SETCSAUTHENTICATION -n:vc4user -p:vc4password##
89 +* Reboot after entering the above settings
90 +
91 +(% class="box warningmessage" %)
92 +(((
93 +showrunner will generate the RSD file as an EISC type, the SIMPL Windows programmer will need to convert the symbol to an //EISC Server//.  At the time of this writing, Crestron does not allow import/export of RSD files for //EISC Client//, //EISC Server,// and //Virtual Control EISC Client// types.
94 +)))
95 +
96 +(% class="box warningmessage" %)
97 +(((
98 +showrunner uses analog join 4001 on normal EISCs to confirm the logic is fully online.  Join 4001 is not available on //EISC Client//, //EISC Server,// and //Virtual Control EISC Client// types so 4000 is used instead.
99 +)))