Skip to Content
Last modified by Mark Kohlmann on 2024/11/19 23:23
From version 5.1
edited by Mark Kohlmann
on 2021/06/02 22:09
Change comment: There is no comment for this version
To version 2.1
edited by Mark Kohlmann
on 2021/06/02 21:49
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -8,58 +8,7 @@
8 8  *** Provides a standardized interface for controlling areas
9 9  *** Area selection may be changed at run-time
10 10  *** [[AV Integration Demo>>url:https://files.chiefintegrations.com/s/Di4aypEKX7APn8n]]
11 -*** Signals Provided per Area (signals vary by Area settings/configuration):
12 -**** Area Name
13 -**** Occupied
14 -**** Occupancy Enable/Disable
15 -**** Color Temp Auto
16 -**** Color Temp Manual Set and Feedback
17 -**** Area Master Raise/Lower
18 -**** Save Current Scene
19 -**** Recall Scene # and Current Scene Feedback
20 -**** Extended Scene Export option set
21 -***** Scene Count
22 -***** Scene Names
23 -**** Load Count
24 -**** Load Level Analogs
25 -**** Load Names
26 -**** Extended Load Export option set
27 -***** CCT Load type: Color Temp
28 -***** RGB[A|W]: Individual Color Channels
29 -**** Shade Count
30 -**** All Shade Open/Close
31 -**** Shade Name
32 -**** Shade Open/Close/Stop
33 -**** Ignore Fade Times option set
34 -***** Fade Times are not sent out, only final value.  Reduces traffic.
35 35  ** Device Export
36 -*** Exports devices with specific signals for each device type
37 -**** Occupancy Sensor
38 -***** Occupied
39 -***** Online Feedback
40 -**** Keyswitch
41 -***** Active Feedback
42 -**** Partition Sensor
43 -***** Combined Feedback
44 -**** Keypad
45 -***** Enable/Disable w/ Feedback
46 -***** Button Press Event
47 -***** Button Feedback Setting
48 -***** Extended Keypad Export option set
49 -****** Button Tap/Double Tap/Held Events
50 -**** Global Actions
51 -***** Activate
52 -**** Shade
53 -***** Open/Close/Stop
54 -**** Load
55 -***** Level Set and Feedback
56 -**** Photocell
57 -***** Sensor Reading
58 -**** Area
59 -***** Scene Set and Feedback
60 -*** Devices to be exported are defined in the configuration and are not changeable at run-tim
61 -
62 -(% class="box warningmessage" %)
63 -(((
64 -Note: Any changes to load hardware/scene quantity will require a regeneration of the EISC and will result in signal changes.
65 -)))
12 +*** Exports devices with specific parameters for each device type
13 +*** Devices to be exported are defined in the configuration and are not changeable at run-time
14 +* Any changes to load hardware/scene quantity will require a regeneration of the EISC and will result in signal changes.