Skip to Content
Last modified by Mark Kohlmann on 2024/11/19 23:23
From version 3.1
edited by Mark Kohlmann
on 2021/06/02 22:07
Change comment: There is no comment for this version
To version 2.1
edited by Mark Kohlmann
on 2021/06/02 21:49
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -8,53 +8,7 @@
8 8  *** Provides a standardized interface for controlling areas
9 9  *** Area selection may be changed at run-time
10 10  *** [[AV Integration Demo>>url:https://files.chiefintegrations.com/s/Di4aypEKX7APn8n]]
11 -*** Signals Provided per Area (signals vary by Area settings/configuration):
12 -**** Area Name
13 -**** Occupied
14 -**** Occupancy Enable/Disable
15 -**** Color Temp Auto
16 -**** Color Temp Manual Set and Feedback
17 -**** Area Master Raise/Lower
18 -**** Save Current Scene
19 -**** Recall Scene # and Current Scene Feedback
20 -**** Extended Scene Export option set
21 -***** Scene Count
22 -***** Scene Names
23 -**** Load Count
24 -**** Load Level Analogs
25 -**** Load Names
26 -**** Extended Load Export option set
27 -***** CCT Load type: Color Temp
28 -***** RGB[A|W]: Individual Color Channels
29 -**** Shade Count
30 -**** All Shade Open/Close
31 -**** Shade Name
32 -**** Shade Open/Close/Stop
33 -****
34 34  ** Device Export
35 -*** Exports devices with specific signals for each device type
36 -**** Occupancy Sensor
37 -***** Occupied
38 -***** Online Feedback
39 -**** Keyswitch
40 -***** Active Feedback
41 -**** Partition Sensor
42 -***** Combined Feedback
43 -**** Keypad
44 -***** Enable/Disable w/ Feedback
45 -***** Button Press Event
46 -***** Button Feedback Setting
47 -***** Extended Keypad Export option set
48 -****** Button Tap/Double Tap/Held Events
49 -**** Global Actions
50 -***** Activate
51 -**** Shade
52 -***** Open/Close/Stop
53 -**** Load
54 -***** Level Set and Feedback
55 -**** Photocell
56 -***** Sensor Reading
57 -**** Area
58 -***** Scene Set and Feedback
12 +*** Exports devices with specific parameters for each device type
59 59  *** Devices to be exported are defined in the configuration and are not changeable at run-time
60 60  * Any changes to load hardware/scene quantity will require a regeneration of the EISC and will result in signal changes.