Skip to Content
Last modified by Mark Kohlmann on 2024/11/19 23:23
From version 2.1
edited by Mark Kohlmann
on 2021/06/02 21:49
Change comment: There is no comment for this version
To version 3.1
edited by Mark Kohlmann
on 2021/06/02 22:07
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -8,7 +8,53 @@
8 8  *** Provides a standardized interface for controlling areas
9 9  *** Area selection may be changed at run-time
10 10  *** [[AV Integration Demo>>url:https://files.chiefintegrations.com/s/Di4aypEKX7APn8n]]
11 +*** Signals Provided per Area (signals vary by Area settings/configuration):
12 +**** Area Name
13 +**** Occupied
14 +**** Occupancy Enable/Disable
15 +**** Color Temp Auto
16 +**** Color Temp Manual Set and Feedback
17 +**** Area Master Raise/Lower
18 +**** Save Current Scene
19 +**** Recall Scene # and Current Scene Feedback
20 +**** Extended Scene Export option set
21 +***** Scene Count
22 +***** Scene Names
23 +**** Load Count
24 +**** Load Level Analogs
25 +**** Load Names
26 +**** Extended Load Export option set
27 +***** CCT Load type: Color Temp
28 +***** RGB[A|W]: Individual Color Channels
29 +**** Shade Count
30 +**** All Shade Open/Close
31 +**** Shade Name
32 +**** Shade Open/Close/Stop
33 +****
11 11  ** Device Export
12 -*** Exports devices with specific parameters for each device type
35 +*** Exports devices with specific signals for each device type
36 +**** Occupancy Sensor
37 +***** Occupied
38 +***** Online Feedback
39 +**** Keyswitch
40 +***** Active Feedback
41 +**** Partition Sensor
42 +***** Combined Feedback
43 +**** Keypad
44 +***** Enable/Disable w/ Feedback
45 +***** Button Press Event
46 +***** Button Feedback Setting
47 +***** Extended Keypad Export option set
48 +****** Button Tap/Double Tap/Held Events
49 +**** Global Actions
50 +***** Activate
51 +**** Shade
52 +***** Open/Close/Stop
53 +**** Load
54 +***** Level Set and Feedback
55 +**** Photocell
56 +***** Sensor Reading
57 +**** Area
58 +***** Scene Set and Feedback
13 13  *** Devices to be exported are defined in the configuration and are not changeable at run-time
14 14  * Any changes to load hardware/scene quantity will require a regeneration of the EISC and will result in signal changes.