Skip to Content
Last modified by Mark Kohlmann on 2024/11/19 23:23
From version 14.1
edited by Alexander Mott
on 2023/05/16 16:32
Change comment: There is no comment for this version
To version 10.1
edited by Alexander Mott
on 2023/05/11 15:30
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,11 +1,6 @@
1 1  (% class="box warningmessage" %)
2 2  (((
3 -Note: Any changes to load hardware/scene quantity will require a regeneration of the EISC and will result in signal changes. When importing a new or updated RSD file to the A/V program, ensure the appropriate options are selected:
4 -
5 -* "Disconnect signal from Etherenet ISC symbol in program."
6 -* "Change Locally: Update signal name in EISC ISC symbol only."
7 -
8 -[[image:MicrosoftTeams-image.png||height="413" width="394"]]
3 +Note: Any changes to load hardware/scene quantity will require a regeneration of the EISC and will result in signal changes.
9 9  )))
10 10  
11 11  ShowRunnerCLC™ provides Ethernet Intersystem Communications interfaces for integration with 3rd party Crestron systems.
... ... @@ -69,12 +69,13 @@
69 69  ***** Scene Set and Feedback
70 70  *** Devices to be exported are defined in the configuration and are not changeable at run-time.
71 71  
67 +(% class="wikigeneratedid" %)
72 72  ==== Processors with Control Subnets ====
73 73  
74 -When integrating a 3-Series EISC with a processor that has both a LAN port and a Control Subnet using a connection over the LAN, there are some additional settings that need to be enabled in order for the integration to work correctly. It is necessary to either set up CWS users and enable a secure (SCIP on port 41796) EISC or run the following commands:
70 +When integrating a 3-Series EISC with a processor that has both a LAN port and a Control Subnet using a connection over the LAN, there are some additional settings that need to be enabled in order for the integration to work correctly. These commands are the same for both 3-Series and 4-Series processors:
75 75  
76 76  * ##securegateway default##
77 -** Enables non-secure connections (CIP on port 41794) from the LAN side
73 +** Enables non-secure connections (CIP on port 41794) from the LAN side instead of requiring a secure connection (SCIP on port 41796)
78 78  * ##isolatenetworks off##
79 79  ** Enables communications between the LAN and the Control Subnet, where the actual control processor is located
80 80  
MicrosoftTeams-image.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.alexander\.mott@chiefintegrations\.com
Size
... ... @@ -1,1 +1,0 @@
1 -186.5 KB
Content