Skip to Content
Last modified by Scott Kohlmann on 2023/04/20 22:34
From version 3.1
edited by Mark Kohlmann
on 2021/06/11 19:51
Change comment: There is no comment for this version
To version 4.1
edited by Mark Kohlmann
on 2021/06/11 19:53
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -27,7 +27,7 @@
27 27  
28 28  ===== Option 2: Locations are treated as SHOWRUNNER™ Areas and Individual Fixture Control (Optional) =====
29 29  
30 -In this scenario we treat Locations on the WTEC system as an SR Area.  This approach is best when an SR touchscreen, keypad, schedule, or occupancy sensor needs to recall scenes defined on the WTEC system.  SR scenes are mapped to WTEC Location scenes by querying the WTEC system for the scene names assigned to a Location.  The last scene listed is mapped to SR's off scene, the first through 2nd to last are mapped in order from scene 1 (on) to scene N.  Master raise/lower will be sent to the WTEC system to control the master intensity.  Fixtures may be controlled individually in this application if there are no scene settings on the WTEC system because an active WTEC scene will lock out fixture control.  Settings this up is best done by importing a csv file into SR from the command line.
30 +In this scenario we treat Locations on the WTEC system as an SR Area.  This approach is best when an SR touchscreen, keypad, schedule, or occupancy sensor needs to recall scenes defined on the WTEC system.  SR scenes are mapped to WTEC Location scenes by querying the WTEC system for the scene names assigned to a Location.  The last scene listed is mapped to SR's off scene, the first through 2nd to last are mapped in order from scene 1/On to scene N.  Master raise/lower will be sent to the WTEC system to control the master intensity.  Fixtures may be controlled individually in this application if there are no scene settings on the WTEC system because an active WTEC scene will lock out fixture control.  Settings this up is best done by importing a csv file into SR from the command line.
31 31  
32 32  ===== Notes: =====
33 33