Wiki source code of Crestron Zūm Wireless
Version 1.2 by Mark Kohlmann on 2020/04/14 17:37
Show last authors
| author | version | line-number | content |
|---|---|---|---|
| 1 | Crestron Zūm Wireless is a locally integrated lighting control system with various global control options. SHOWRUNNER™ provides a number of integrations options that allow the designer to optimize the solution design. | ||
| 2 | |||
| 3 | ==== Integration Options ==== | ||
| 4 | |||
| 5 | * SHOWRUNNER™ Total Control - The most comprehensive option. Allows seamless integration of Zūm and non-Zūm Crestron lighting control products. Extensive feature set allows centralized control and management of Zūm rooms. Advanced scheduler provides more flexibility to the facility operator. This solution replaces the ZUM-FLOOR-HUB. | ||
| 6 | * SHOWRUNNER™ + AVBRIDGE + Serial Port - Provides scene setting and load control via a dedicated AVBRIDGE in each Zūm room. Requires a dedicated serial port (C2N-IO/CEN-IO-COM2/etc) and a dedicated ZUMMESH-AVBRIDGE per room. | ||
| 7 | * SHOWRUNNER™ + ZUM-FLOOR-HUB - Provides limited scene recall and room status for Zūm rooms paired with the Floor Hub. SHOWRUNNER™ can export its own areas to the Floor Hub. | ||
| 8 | |||
| 9 | ==== Feature Matrix ==== | ||
| 10 | |||
| 11 | |=Feature|=SHOWRUNNER™ Total Control|=SHOWRUNNER™ + AVBRIDGE + Serial Port|=SHOWRUNNER™ + ZUM-FLOOR-HUB|=ZUM-FLOOR-HUB Only|=Zūm iOS/Android Setup App* | ||
| 12 | |(% colspan="6" %)**Hardware Requirements** | ||
| 13 | |Requires JBOX and ZUMMESH-NETBRIDGE|Y|N|Y|Y|Y | ||
| 14 | |Requires ZUMMESH-GATEWAY|Y|N|Y|Y|N/A | ||
| 15 | |Requires RS-232 Serial Port per Room|N|Y|N|N|N/A | ||
| 16 | |Physical Presence in Room to Change Scenes|N|N|Y, via Zūm Setup App|Y, via Zūm Setup App|Y | ||
| 17 | |(% colspan="6" %)**User Interfaces** | ||
| 18 | |Web Browser|((( | ||
| 19 | Crestron SmartGraphics XPanel | ||
| 20 | HTML5 UI Under Development (Q4 2020) | ||
| 21 | )))|Crestron SmartGraphics XPanel | ||
| 22 | HTML5 UI Under Development (Q4 2020)|SHOWRUNNER™ - Crestron SmartGraphics XPanel | ||
| 23 | ZUM-FLOOR-HUB - HTML5 UI|HTML5 UI|N | ||
| 24 | |iOS/Android|Y, Crestron App (Paid Upgrade)|Y, Crestron App (Paid Upgrade)|Y, Crestron App (Paid Upgrade), Limited Features for Zūm Rooms|N|Y, Physical Presence in Room Required | ||
| 25 | |Touchscreens (Crestron TSW series)|Y|Y|Y, Limited Features for Zūm Rooms|N|N | ||
| 26 | |(% colspan="6" %)**Features** | ||
| 27 | |Scene Recall|Y|Y|Y|Y|Y | ||
| 28 | |Override Fade Time for Scene Recall~*~*|Y|N|N|N|N | ||
| 29 | |Scene Save|Y|Y|N|N|Y | ||
| 30 | |Load Control|Y|Y|N|N|Y | ||
| 31 | |Demand Response|Y|N|Y, separate triggers for SHOWRUNNER™ and ZUM-FLOOR-HUB required|Y|N | ||
| 32 | |Enable/Disable Occupancy|Y|Y|Y, from Floor Hub|Y|Y | ||
| 33 | |Override Occupancy Logic|Y|Y|N|N|N | ||
| 34 | |Plug Load On/Off|Y| | | | | ||
| 35 | |Integration with Non-Zūm Hardware|Y|Y|N|N|N | ||
| 36 | |Custom Keypad Programming| | | | | | ||
| 37 | |||
| 38 | ##* Zūm Setup App works as long as the NETBRIDGE is physically near the iOS/Android device running the Zūm Setup App.## | ||
| 39 | ##~*~* Fade time is automatically applied if scene is set longer than 1 second. Must be triggered from SHOWRUNNER™, cannot be triggered from Zūm keypad with current firmware (Apr 2020).## |