Changes for page Crestron Zūm Wireless

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -2,7 +2,7 @@
2	2
3	3	==== Integration Options ====
4	4
5		-* **SHOWRUNNER™ Total Control** - The most comprehensive option.  Allows seamless (see [[Caveats>>||anchor="caveats"]]) integration of Zūm and non-Zūm Crestron lighting control products.  Extensive feature set allows centralized control and management of Zūm rooms.  Advanced scheduler provides more flexibility to the facility operator.  This solution replaces the ZUM-FLOOR-HUB in the system design.
	5	+* **SHOWRUNNER™ Total Control** - The most comprehensive option.  Allows seamless integration of Zūm and non-Zūm Crestron lighting control products.  Extensive feature set allows centralized control and management of Zūm rooms.  Advanced scheduler provides more flexibility to the facility operator.  This solution replaces the ZUM-FLOOR-HUB in the system design.
6	6	* **SHOWRUNNER™ + AVBRIDGE + Serial Port** - Provides scene setting and load control via a dedicated AVBRIDGE in each Zūm room.  Requires a dedicated serial port (C2N-IO/CEN-IO-COM2/etc) and a dedicated ZUMMESH-AVBRIDGE per room.
7	7	* **SHOWRUNNER™ + ZUM-FLOOR-HUB** - Provides limited scene recall and room status for Zūm rooms paired with the Floor Hub.  SHOWRUNNER™ can export its own areas to the Floor Hub.
8	8
...	...	@@ -29,7 +29,7 @@
29	29	|Scene Recall|Y ~*~*~*~*|Y ~*~*~*~*|Y|Y|Y
30	30	|Override Fade Time for Scene Recall ~*~*|Y|N|N|N|N
31	31	|Scene Save|Y ~*~*~*~*|Y ~*~*~*~*|N|N|Y
32		-|Load Control|Y ~*~**/~*~*~*~**|Y ~*~**|N|N|Y
	32	+|Load Control|Y ~*~**|Y ~*~**|N|N|Y
33	33	|Demand Response|Y|N|Y, separate triggers for SHOWRUNNER™ and ZUM-FLOOR-HUB required|Y|N
34	34	|Enable/Disable Occupancy|Y|Y|Y, from Floor Hub|Y|Y
35	35	|Override Occupancy Logic|Y|Y|N|N|N
...	...	@@ -130,9 +130,12 @@
130	130	|Minimum Gateway Firmware|v1.4469.00011|N/A|N/A|See Crestron|See Crestron
131	131	|Minimum SHOWRUNNER™ Version|2.198|2.198|N/A|N/A|N/A
132	132
133		-{{{* Zūm Setup App works as long as the NETBRIDGE is physically near the iOS/Android device running the Zūm Setup App. ** Fade time is automatically applied if scene is set longer than 1 second. Must be triggered from SHOWRUNNER™, cannot be triggered from Zūm keypad with current firmware (as of April 2020). *** Zūm wireless does not support direct coupling of fade times and the behavior is different internally within the dimmer versus other Crestron products. Raise/Lower level accuracy is not guaranteed. For best performance when settings scenes, set the slider manually which will send exact levels to the dimmer. **** Zūm wireless scenes cannot presently be read on command. Scenes should be created and saved from SHOWRUNNER™ directly. Saved scenes are stored directly on the Zūm wireless dimmer and in ShowRunner. ShowRunner will query the NETBRIDGE after scene recall and attempt to build scene information but operations are done one at a time. ***** Zūm wireless real time load status is not available.  Any changes to loads performed using the raise/lower functions in room will not be propagated back to ShowRunner.  Levels set by the daylight sensor with daylighting enabled will not be reported by ShowRunner. }}}
	133	+{{{* Zūm Setup App works as long as the NETBRIDGE is physically near the iOS/Android device running the Zūm Setup App.
	134	+** Fade time is automatically applied if scene is set longer than 1 second. Must be triggered from SHOWRUNNER™, cannot be triggered from Zūm keypad with current firmware (as of April 2020).
	135	+*** Zūm wireless does not support direct coupling of fade times and the behavior is different internally within the dimmer versus other Crestron products. Raise/Lower level accuracy is not guaranteed. For best performance when settings scenes, set the slider manually which will send exact levels to the dimmer.
	136	+**** Zūm wireless scenes cannot presently be read on command. Scenes should be created and saved from SHOWRUNNER™ directly. Saved scenes are stored directly on the Zūm wireless dimmer and in ShowRunner. ShowRunner will query the NETBRIDGE after scene recall and attempt to build scene information but operations are done one at a time.
	137	+}}}
134	134
135		-{{id name="caveats"/}}
136	136	==== Caveats ====
137	137
138	138	* Zum Wireless has an internal rate limit that will shutdown communication if a number of commands are received in a short period of time.  This can be seen when repeatedly pressing buttons on a keypad as well as repeatedly triggering actions from ShowRunner.
...	...	@@ -157,6 +157,7 @@
157	157	* BACNET support requires a processor hardware license and ShowRunner BACNET license.  BACNET point availability can be configured per Area.
158	158	* Chief Integrations recommends one 3-series processor per building floor at a minimum.
159	159	* Zummesh and infiNET EX devices are not officially supported on the same gateway, discuss with Crestron if needing both.
	163	+* Full support has been verified against ZUM-MESHNET firmware puf v1.05.08 (NETBRIDGE Firmware v1.010.0055)
160	160
161	161	(% id="HTopologies" %)
162	162	==== Topologies ====