Skip to Content

Changes for page Crestron Zūm Wireless

Last modified by Scott Kohlmann on 2023/04/20 22:28
From version 22.1
edited by Mark Kohlmann
on 2021/03/17 15:23
Change comment: There is no comment for this version
To version 3.30
edited by Mark Kohlmann
on 2020/04/14 21:16
Change comment: (Autosaved)

Summary

Details

Page properties
Content
... ... @@ -1,21 +1,19 @@
1 -Crestron Zūm Wireless is a locally integrated lighting control system with various global control options.  Zūm rooms are self-contained control units with primary logic occurring at the room level.  Central control systems offer scheduling and management.  SHOWRUNNER™ provides a number of integrations options that allow the designer to optimize the solution design.
1 +Crestron Zūm Wireless is a locally integrated lighting control system with various global control options.  SHOWRUNNER™ provides a number of integrations options that allow the designer to optimize the solution design.
2 2  
3 3  ==== Integration Options ====
4 4  
5 -* **SHOWRUNNER™ Total Control** - The most comprehensive option.  Allows seamless (see [[Caveats>>doc:||anchor="Caveats"]]) integration of Zūm and non-Zūm Crestron lighting control products.  Extensive feature set allows centralized control and management of Zūm rooms.  Advanced scheduler provides more flexibility to the facility operator.  This solution replaces the ZUM-FLOOR-HUB in the system design.
6 -* **SHOWRUNNER™ + AVBRIDGE + Serial Port** - Provides scene setting and load control via a dedicated AVBRIDGE in each Zūm room.  Requires a dedicated serial port (C2N-IO/CEN-IO-COM2/etc) and a dedicated ZUMMESH-AVBRIDGE per room.
7 -* **SHOWRUNNER™ + ZUM-FLOOR-HUB** - Provides limited scene recall and room status for Zūm rooms paired with the Floor Hub.  SHOWRUNNER™ can export its own areas to the Floor Hub.
5 +* SHOWRUNNER™ Total Control - The most comprehensive option.  Allows seamless integration of Zūm and non-Zūm Crestron lighting control products.  Extensive feature set allows centralized control and management of Zūm rooms.  Advanced scheduler provides more flexibility to the facility operator.  This solution replaces the ZUM-FLOOR-HUB.
6 +* SHOWRUNNER™ + AVBRIDGE + Serial Port - Provides scene setting and load control via a dedicated AVBRIDGE in each Zūm room.  Requires a dedicated serial port (C2N-IO/CEN-IO-COM2/etc) and a dedicated ZUMMESH-AVBRIDGE per room.
7 +* SHOWRUNNER™ + ZUM-FLOOR-HUB - Provides limited scene recall and room status for Zūm rooms paired with the Floor Hub.  SHOWRUNNER™ can export its own areas to the Floor Hub.
8 8  
9 9  ==== Feature Matrix ====
10 10  
11 -(% border="1" style="margin-left:auto; margin-right:auto" %)
12 12  |=Feature|=SHOWRUNNER™ Total Control|=SHOWRUNNER™ + AVBRIDGE + Serial Port|=SHOWRUNNER™ (External Room Export) + ZUM-FLOOR-HUB (Mirror Driver)|=ZUM-FLOOR-HUB Only|=Zūm iOS/Android Setup App*
13 13  |(% colspan="6" %)**Hardware Requirements**
14 -|Requires JBOX with ZUMMESH-NETBRIDGE|Y|N|Y|Y|Y
13 +|Requires JBOX and ZUMMESH-NETBRIDGE|Y|N|Y|Y|Y
15 15  |Requires ZUMMESH-GATEWAY|Y|N|Y|Y|N/A
16 -|Requires Dedicated RS-232 Serial Port per Room|N|Y|N|N|N/A
17 -|Requires 3 or 4-Series Control System|Y|Y|Y|N|N/A
18 -|Requires Physical Presence in Room to Change Scenes|N|N|Y, via Zūm Setup App|Y, via Zūm Setup App|Y
15 +|Requires RS-232 Serial Port per Room|N|Y|N|N|N/A
16 +|Physical Presence in Room to Change Scenes|N|N|Y, via Zūm Setup App|Y, via Zūm Setup App|Y
19 19  |(% colspan="6" %)**User Interfaces**
20 20  |Web Browser|(((
21 21  Crestron SmartGraphics XPanel
... ... @@ -26,10 +26,10 @@
26 26  |iOS/Android|Y, Crestron App (Paid Upgrade)|Y, Crestron App (Paid Upgrade)|Y, Crestron App (Paid Upgrade), Limited Features for Zūm Rooms|N|Y*
27 27  |Touchscreens (Crestron TSW series)|Y|Y|Y, Limited Features for Zūm Rooms|N|N
28 28  |(% colspan="6" %)**Features**
29 -|Scene Recall|Y ~*~*~*~*|Y ~*~*~*~*|Y|Y|Y
30 -|Override Fade Time for Scene Recall ~*~*|Y|N|N|N|N
31 -|Scene Save|Y ~*~*~*~*|Y ~*~*~*~*|N|N|Y
32 -|Load Control|Y ~*~**/~*~*~*~**|Y ~*~**|N|N|Y
27 +|Scene Recall|Y|Y|Y|Y|Y
28 +|Override Fade Time for Scene Recall~*~*|Y|N|N|N|N
29 +|Scene Save|Y|Y|N|N|Y
30 +|Load Control|Y|Y|N|N|Y
33 33  |Demand Response|Y|N|Y, separate triggers for SHOWRUNNER™ and ZUM-FLOOR-HUB required|Y|N
34 34  |Enable/Disable Occupancy|Y|Y|Y, from Floor Hub|Y|Y
35 35  |Override Occupancy Logic|Y|Y|N|N|N
... ... @@ -41,25 +41,17 @@
41 41  |Room Organization|(((
42 42  Under Development:
43 43  Building/Floor/Sub-Group/Area
44 -Categorization to Filter by Category/Tag
42 +Categorization to Filter by Different Types
45 45  )))|See SHOWRUNNER™ Total Control|SHOWRUNNER™: See SHOWRUNNER™ Total Control
46 46  Floor Hub: Category/Room|Category/Room|(((
47 47  N/A
48 48  )))
49 -|Room Discovery|Automatic Discovery of Gateways and NETBRIDGES|Pre-Configured at Order|SHOWRUNNER™: Pre-Configured at Order
50 -Floor Hub: Map Mirrored Rooms to SHOWRUNNER™ and Discovery External Rooms|Automatic Discovery of Gateways and NETBRIDGES|N/A
51 -|Firmware Updates|PUF Tool
52 -Automatic Support on Roadmap|(((
53 -PUF Tool
54 -Automatic Support on Roadmap
55 -)))|SHOWRUNNER™: PUF Tool
56 -Floor Hub: Automatic, Internet Connection Required|Automatic, Internet Connection Required|N/A
57 57  |(% colspan="6" %)**Calendar/Scheduling**
58 58  |Logic Type|Event Driven
59 59  Profile Support (Under Development)|Event Driven
60 60  Profile Support (Under Development)|SHOWRUNNER™: Event Driven
61 61  Floor Hub: Pattern assigned to Category|Pattern assigned to Category|N/A
62 -|Astronomical Clock|Y|Y|Y, Per Category|Y, Per Category|N/A
52 +|Astronomical Clock|Y|Y|Y|Y|N/A
63 63  |Holidays|Pattern|Pattern|SHOWRUNNER™: Pattern
64 64  Floor Hub: Hard Coded|Hard Coded|N/A
65 65  |Custom Patterns|Y, Advanced Scheduler License|Y, Advanced Scheduler License|SHOWRUNNER™: Y, Advanced Scheduler License
... ... @@ -84,13 +84,10 @@
84 84  Occupancy Enabled
85 85  Individual Load Level
86 86  Photocell Level (per Photocell)
87 -Plug Loads Enabled
88 88  
89 89  System:
90 90  Demand Response Enabled
91 91  System Wide Override (Panic/Emergency)
92 -
93 -~* More Features added upon request
94 94  )))|See list for SHOWRUNNER™ Total Control|(((
95 95  SHOWRUNNER™: See list for SHOWRUNNER™ Total Control
96 96  Floor Hub: See list for ZUM-FLOOR-HUB
... ... @@ -108,90 +108,15 @@
108 108  \\System:
109 109  Demand Response Enabled
110 110  )))|N/A
111 -|BACNET Settings Scope
112 -(What Points are Exposed)|Per Area|Per Area|(((
98 +|BACNET Settings Scope|Per Area|Per Area|(((
113 113  SHOWRUNNER™: Per Area
114 114  Floor Hub: Global
115 115  )))|Global|N/A
116 -|BACNET Points Supported|Depends on Crestron License and Hardware|Depends on Crestron License and Hardware|SHOWRUNNER™: Depends on Crestron License and Hardware
117 -Floor Hub: 1000|1000|N/A
118 118  |Crestron Fusion|Y|Y|(((
119 119  SHOWRUNNER™: Y
120 120  Floor Hub: N
121 121  )))|N|N/A
122 122  |Export to Zūm Floor Hub|Y, Licensed|Y, Licensed|SHOWRUNNER™: Y, Licensed|N/A|N/A
123 -|GLPAC|Y|Y|SHOWRUNNER™: Y
124 -Floor Hub: Via SHOWRUNNER™|N|N/A
125 -|System to System Link|Y|Y|(((
126 -SHOWRUNNER™: Y
127 -Floor Hub: N
128 -)))|N|N/A
129 -|Minimum NETBRIDGE Firmware|v1.12.0130 (PUF Zum MESHNET v1.06.09)|v1.010|N/A|See Crestron|See Crestron
130 -|Minimum Gateway Firmware|v1.4469.00011|N/A|N/A|See Crestron|See Crestron
131 -|Minimum SHOWRUNNER™ Version|2.198|2.198|N/A|N/A|N/A
132 132  
133 -{{{* Zūm Setup App works as long as the NETBRIDGE is physically near the iOS/Android device running the Zūm Setup App.
134 -** Fade time is automatically applied if scene is set longer than 1 second. Must be triggered from SHOWRUNNER™, cannot be triggered from Zūm keypad with current firmware (as of April 2020).
135 -*** Zūm wireless does not support direct coupling of fade times and the behavior is different internally within the dimmer versus other Crestron products. Raise/Lower level accuracy is not guaranteed. For best performance when settings scenes, set the slider manually which will send exact levels to the dimmer.
136 -**** Zūm wireless scenes cannot presently be read on command. Scenes should be created and saved from SHOWRUNNER™ directly. Saved scenes are stored directly on the Zūm wireless dimmer and in ShowRunner. ShowRunner will query the NETBRIDGE after scene recall and attempt to build scene information but operations are done one at a time.
137 -***** Zūm wireless real time load status is not available.  Any changes to loads performed using the raise/lower functions in room will not be propagated back to ShowRunner.  Levels set by the daylight sensor with daylighting enabled will not be reported by ShowRunner.
138 -
139 -}}}
140 -{{id name="caveats" /}}
141 -==== Caveats ====
142 -
143 -* Zum Wireless has an internal rate limit that will shutdown communication if a number of commands are received in a short period of time.  This can be seen when repeatedly pressing buttons on a keypad as well as repeatedly triggering actions from ShowRunner.
144 -* Raise/Lower operations from ShowRunner cannot track directly with the load response, see ~*~** above.  ShowRunner will poll the NETBRIDGE for current levels ~~3 seconds after the raise/lower is stopped to obtain current load levels.
145 -* Lower operations can turn the load off.  The load will not come on with a raise.  This is a firmware behavior in the Zum hardware.
146 -* Wireless control presents some additional latency possibilities.  Commands required to provide full functionality (load control/raise/lower) with Zum wireless are more intensive than traditional Crestron hardware and may impact performance under heavy load.  Local operation of the Zum wireless room is not impacted.
147 -* Real time load status is not available.  Any changes to loads performed using the raise/lower functions in room will not be propagated back to ShowRunner.  Levels set by the daylight sensor with daylighting enabled will not be reported by ShowRunner.
148 -* Keypad behaviors cannot be modified.  Custom keypads can be implemented using the AVBRIDGE connected to the system via a serial port, Zum requires an AV specific keypad for this purpose.
149 -* Zum Partition Sensors do not report back to the system and cannot be used to handle room divide/combine logic.
150 -* Off Scene cannot be saved and is always room Off
151 -* Scenes 1 through 16 are supported and may be modified and saved.
152 -* Scenes with fade times greater than 1 second will result in loads being commanded individual from ShowRunner and may not be in sync depending on load quantity, RF gateway load, and RF signal integrity.  Zum hardware does not support a fade time as part of the Scene setting.  Fade times must be commanded from ShowRunner.  Scene fade times will be ignored when scenes are activated by Zum keypads or internal occupancy logic.
153 -* Saving scenes from ShowRunner captures the levels set in ShowRunner at the time of the save.  ShowRunner will attempt to learn scenes as they are recalled.
154 -* Override/Override Level features are not supported
155 -* Load disable is not supported
156 -* After hours logic is not supported
157 -* Blink before timeout is not supported
158 -* CCT control is presently not supported (ZUMMESH-JBOX-DALI support may be available in the future)
159 -* RGB loads are not supported
160 -* Minimum/Maximum Levels are not supported when loads are being recalled locally.  ShowRunner will honor them when control occurs from ShowRunner except for raise/lower which is peformed on hardware.
161 -* Dimming curves are not supported when loads are being recalled locally.  Use Zum app to adjust dimming curves if necessary.  Recommended to leave ShowRunner dimming curve set to "Unaffected".
162 -* BACNET support requires a processor hardware license and ShowRunner BACNET license.  BACNET point availability can be configured per Area.
163 -* Chief Integrations recommends one 3-series processor per building floor at a minimum.
164 -* Zummesh and infiNET EX devices are not officially supported on the same gateway, discuss with Crestron if needing both.
165 -
166 -(% id="HTopologies" %)
167 -==== Topologies ====
168 -
169 -(% class="box" %)
170 -(((
171 -**SHOWRUNNER™ Total Control**
172 -[[image:ZumSr\@2x.png||alt="Zum SHOWRUNNER™ Total Control Topology"]]
173 -)))
174 -
175 -(% class="box" %)
176 -(((
177 -**SHOWRUNNER™ + AVBRIDGE + Serial Port**
178 -[[image:ZumAvbSr\@2x.png||alt="Zum AVBRIDGE + SHOWRUNNER™ Topology"]]
179 -)))
180 -
181 -(% class="box" %)
182 -(((
183 -**SHOWRUNNER™ (External Room Export) + ZUM-FLOOR-HUB (Mirror Driver)**
184 -[[image:ZumFhSr\@2x.png||alt="Zum Floor Hub + SHOWRUNNER™ Topology"]]
185 -)))
186 -
187 -(% class="box" %)
188 -(((
189 -**ZUM-FLOOR-HUB Only**
190 -[[image:ZumFh\@2x.png||alt="Zum Floor Hub Topology"]]
191 -)))
192 -
193 -(% class="box" %)
194 -(((
195 -**Zūm iOS/Android Setup App**
196 -[[image:ZumApp\@2x.png||alt="Zum App Topology"]]
197 -)))
108 +##* Zūm Setup App works as long as the NETBRIDGE is physically near the iOS/Android device running the Zūm Setup App.##
109 +##~*~* Fade time is automatically applied if scene is set longer than 1 second.  Must be triggered from SHOWRUNNER™, cannot be triggered from Zūm keypad with current firmware (as of April 2020).##
ZumApp@2x.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.mark\.kohlmann@chiefintegrations\.com
Size
... ... @@ -1,1 +1,0 @@
1 -23.4 KB
Content
ZumAvbSr@2x.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.mark\.kohlmann@chiefintegrations\.com
Size
... ... @@ -1,1 +1,0 @@
1 -66.9 KB
Content
ZumFh@2x.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.mark\.kohlmann@chiefintegrations\.com
Size
... ... @@ -1,1 +1,0 @@
1 -49.8 KB
Content
ZumFhSr@2x.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.mark\.kohlmann@chiefintegrations\.com
Size
... ... @@ -1,1 +1,0 @@
1 -91.4 KB
Content
ZumSr@2x.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.mark\.kohlmann@chiefintegrations\.com
Size
... ... @@ -1,1 +1,0 @@
1 -65.0 KB
Content