Changes for page Crestron Zūm Wireless

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -1,8 +1,8 @@
1		-Crestron Zūm Wireless is a locally integrated lighting control system with various global control options.  Zūm rooms are self-contained control units with primary logic occurring at the room level.  Central control systems offer scheduling and management.  SHOWRUNNER™ provides a number of integrations options that allow the designer to optimize the solution design.
	1	+Crestron Zūm Wireless is a locally integrated lighting control system with various global control options.  SHOWRUNNER™ provides a number of integrations options that allow the designer to optimize the solution design.  SHOWRUNNER™
2	2
3	3	==== Integration Options ====
4	4
5		-* **SHOWRUNNER™ Total Control** - The most comprehensive option.  Allows seamless integration of Zūm and non-Zūm Crestron lighting control products.  Extensive feature set allows centralized control and management of Zūm rooms.  Advanced scheduler provides more flexibility to the facility operator.  This solution replaces the ZUM-FLOOR-HUB in the system design.
	5	+* **SHOWRUNNER™ Total Control** - The most comprehensive option.  Allows seamless integration of Zūm and non-Zūm Crestron lighting control products.  Extensive feature set allows centralized control and management of Zūm rooms.  Advanced scheduler provides more flexibility to the facility operator.  This solution replaces the ZUM-FLOOR-HUB.
6	6	* **SHOWRUNNER™ + AVBRIDGE + Serial Port** - Provides scene setting and load control via a dedicated AVBRIDGE in each Zūm room.  Requires a dedicated serial port (C2N-IO/CEN-IO-COM2/etc) and a dedicated ZUMMESH-AVBRIDGE per room.
7	7	* **SHOWRUNNER™ + ZUM-FLOOR-HUB** - Provides limited scene recall and room status for Zūm rooms paired with the Floor Hub.  SHOWRUNNER™ can export its own areas to the Floor Hub.
8	8
...	...	@@ -15,7 +15,7 @@
15	15	|Requires ZUMMESH-GATEWAY|Y|N|Y|Y|N/A
16	16	|Requires Dedicated RS-232 Serial Port per Room|N|Y|N|N|N/A
17	17	|Requires 3 or 4-Series Control System|Y|Y|Y|N|N/A
18		-|Requires Physical Presence in Room to Change Scenes|N|N|Y, via Zūm Setup App|Y, via Zūm Setup App|Y
	18	+|Physical Presence in Room to Change Scenes|N|N|Y, via Zūm Setup App|Y, via Zūm Setup App|Y
19	19	|(% colspan="6" %)**User Interfaces**
20	20	|Web Browser|(((
21	21	Crestron SmartGraphics XPanel
...	...	@@ -26,10 +26,10 @@
26	26	|iOS/Android|Y, Crestron App (Paid Upgrade)|Y, Crestron App (Paid Upgrade)|Y, Crestron App (Paid Upgrade), Limited Features for Zūm Rooms|N|Y*
27	27	|Touchscreens (Crestron TSW series)|Y|Y|Y, Limited Features for Zūm Rooms|N|N
28	28	|(% colspan="6" %)**Features**
29		-|Scene Recall|Y ~*~*~*~*|Y ~*~*~*~*|Y|Y|Y
30		-|Override Fade Time for Scene Recall ~*~*|Y|N|N|N|N
31		-|Scene Save|Y ~*~*~*~*|Y ~*~*~*~*|N|N|Y
32		-|Load Control|Y ~*~**|Y ~*~**|N|N|Y
	29	+|Scene Recall|Y|Y|Y|Y|Y
	30	+|Override Fade Time for Scene Recall~*~*|Y|N|N|N|N
	31	+|Scene Save|Y|Y|N|N|Y
	32	+|Load Control|Y|Y|N|N|Y
33	33	|Demand Response|Y|N|Y, separate triggers for SHOWRUNNER™ and ZUM-FLOOR-HUB required|Y|N
34	34	|Enable/Disable Occupancy|Y|Y|Y, from Floor Hub|Y|Y
35	35	|Override Occupancy Logic|Y|Y|N|N|N
...	...	@@ -126,70 +126,33 @@
126	126	SHOWRUNNER™: Y
127	127	Floor Hub: N
128	128	)))|N|N/A
129		-|Minimum NETBRIDGE Firmware|v1.12.0130 (PUF Zum MESHNET v1.06.09)|v1.010|N/A|See Crestron|See Crestron
130		-|Minimum Gateway Firmware|v1.4469.00011|N/A|N/A|See Crestron|See Crestron
131		-|Minimum SHOWRUNNER™ Version|2.198|2.198|N/A|N/A|N/A
132	132
133		-{{{* Zūm Setup App works as long as the NETBRIDGE is physically near the iOS/Android device running the Zūm Setup App.
134		-** Fade time is automatically applied if scene is set longer than 1 second. Must be triggered from SHOWRUNNER™, cannot be triggered from Zūm keypad with current firmware (as of April 2020).
135		-*** Zūm wireless does not support direct coupling of fade times and the behavior is different internally within the dimmer versus other Crestron products. Raise/Lower level accuracy is not guaranteed. For best performance when settings scenes, set the slider manually which will send exact levels to the dimmer.
136		-**** Zūm wireless scenes cannot presently be read on command. Scenes should be created and saved from SHOWRUNNER™ directly. Saved scenes are stored directly on the Zūm wireless dimmer and in ShowRunner. ShowRunner will query the NETBRIDGE after scene recall and attempt to build scene information but operations are done one at a time.
137		-}}}
	130	+##* Zūm Setup App works as long as the NETBRIDGE is physically near the iOS/Android device running the Zūm Setup App.##
	131	+##~*~* Fade time is automatically applied if scene is set longer than 1 second.  Must be triggered from SHOWRUNNER™, cannot be triggered from Zūm keypad with current firmware (as of April 2020).##
138	138
139		-==== Caveats ====
140	140
141		-* Zum Wireless has an internal rate limit that will shutdown communication if a number of commands are received in a short period of time.  This can be seen when repeatedly pressing buttons on a keypad as well as repeatedly triggering actions from ShowRunner.
142		-* Raise/Lower operations from ShowRunner cannot track directly with the load response, see ~*~** above.  ShowRunner will poll the NETBRIDGE for current levels ~~3 seconds after the raise/lower is stopped to obtain current load levels.
143		-* Lower operations can turn the load off.  The load will not come on with a raise.  This is a firmware behavior in the Zum hardware.
144		-* Wireless control presents some additional latency possibilities.  Commands required to provide full functionality (load control/raise/lower) with Zum wireless are more intensive than traditional Crestron hardware and may impact performance under heavy load.  Local operation of the Zum wireless room is not impacted.
145		-* Real time load status is not available.  Any changes to loads performed using the raise/lower functions in room will not be propagated back to ShowRunner.  Levels set by the daylight sensor with daylighting enabled will not be reported by ShowRunner.
146		-* Keypad behaviors cannot be modified.  Custom keypads can be implemented using the AVBRIDGE connected to the system via a serial port, Zum requires an AV specific keypad for this purpose.
147		-* Zum Partition Sensors do not report back to the system and cannot be used to handle room divide/combine logic.
148		-* Off Scene cannot be saved and is always room Off
149		-* Scenes 1 through 16 are supported and may be modified and saved.
150		-* Scenes with fade times greater than 1 second will result in loads being commanded individual from ShowRunner and may not be in sync depending on load quantity, RF gateway load, and RF signal integrity.  Zum hardware does not support a fade time as part of the Scene setting.  Fade times must be commanded from ShowRunner.  Scene fade times will be ignored when scenes are activated by Zum keypads or internal occupancy logic.
151		-* Saving scenes from ShowRunner captures the levels set in ShowRunner at the time of the save.  ShowRunner will attempt to learn scenes as they are recalled.
152		-* Override/Override Level features are not supported
153		-* Load disable is not supported
154		-* After hours logic is not supported
155		-* Blink before timeout is not supported
156		-* CCT control is presently not supported (ZUMMESH-JBOX-DALI support may be available in the future)
157		-* RGB loads are not supported
158		-* Minimum/Maximum Levels are not supported when loads are being recalled locally.  ShowRunner will honor them when control occurs from ShowRunner except for raise/lower which is peformed on hardware.
159		-* Dimming curves are not supported when loads are being recalled locally.  Use Zum app to adjust dimming curves if necessary.  Recommended to leave ShowRunner dimming curve set to "Unaffected".
160		-* BACNET support requires a processor hardware license and ShowRunner BACNET license.  BACNET point availability can be configured per Area.
161		-* Chief Integrations recommends one 3-series processor per building floor at a minimum.
162		-* Zummesh and infiNET EX devices are not officially supported on the same gateway, discuss with Crestron if needing both.
163		-
164		-(% id="HTopologies" %)
165	165	==== Topologies ====
166	166
167		-(% class="box" %)
168		-(((
169	169	**SHOWRUNNER™ Total Control**
	137	+
170	170	[[image:ZumSr\@2x.png||alt="Zum SHOWRUNNER™ Total Control Topology"]]
171		-)))
172	172
173		-(% class="box" %)
174		-(((
	140	+
175	175	**SHOWRUNNER™ + AVBRIDGE + Serial Port**
	142	+
176	176	[[image:ZumAvbSr\@2x.png||alt="Zum AVBRIDGE + SHOWRUNNER™ Topology"]]
177		-)))
178	178
179		-(% class="box" %)
180		-(((
	145	+
181	181	**SHOWRUNNER™ (External Room Export) + ZUM-FLOOR-HUB (Mirror Driver)**
	147	+
182	182	[[image:ZumFhSr\@2x.png||alt="Zum Floor Hub + SHOWRUNNER™ Topology"]]
183		-)))
184	184
185		-(% class="box" %)
186		-(((
	150	+
187	187	**ZUM-FLOOR-HUB Only**
188		-[[image:ZumFh\@2x.png||alt="Zum Floor Hub Topology"]]
189		-)))
190	190
191		-(% class="box" %)
192		-(((
	153	+[[image:ZumApp\@2x.png||alt="Zum App Topology"]]
	154	+
	155	+
193	193	**Zūm iOS/Android Setup App**
	157	+
194	194	[[image:ZumApp\@2x.png||alt="Zum App Topology"]]
195		-)))