Skip to Content

Wiki source code of Installation Guide

Last modified by Austin Weygandt on 2022/07/22 19:03
Hide last authors
Austin Weygandt 7.1 1 === Installing CI-GLPAC ===
Austin Weygandt 3.2 2
3
Austin Weygandt 11.1 4 (% class="box warningmessage" %)
5 (((
6 A static IP is required to use the XPanel UI
7 )))
Austin Weygandt 3.2 8
Austin Weygandt 11.1 9 To change IP settings from Toolbox > Text Console, type these commands:
10
Austin Weygandt 3.2 11 dhcp off
12
13 ipa 0 10.0.0.10
14
15 ipm 0 255.255.255.0
16
17 defr 0 10.0.0.1
18
19
Austin Weygandt 11.1 20 ==== Loading the Program ====
21
Austin Weygandt 3.2 22 If a load script was provided:
23
24 Open Toolbox > Script Manager and right click in the empty space, then select the top option: "Load Script..."
25
26 [[image:1658336699737-665.png||height="395" width="694"]]
27
28 Select the file "GLPAC_LoadScript.txt" to populate the tool with operations. In most cases this will be just "GLPAC" which loads the program via USB.
29
30 [[image:1658336908248-692.png||height="103" width="693"]]
31
Austin Weygandt 7.1 32 Double click an entry to run it, or right click and "Start Selected". This will execute the script and the Status column will update as the script progresses.
Austin Weygandt 3.2 33
34 [[image:1658337005335-932.png||height="312" width="255"]]
35
Austin Weygandt 10.1 36 Answer "Yes" to the following prompts
Austin Weygandt 7.1 37
Austin Weygandt 10.1 38 CI-GLPAC works for all models of GLPAC
39
40 [[image:1658338685165-821.png||height="204" width="391"]]
41
42 GLPAC firmware hasn't been updated since 2013
43
44 [[image:1658338738816-788.png||height="252" width="390"]]
45
Austin Weygandt 11.1 46 Answer "Yes" to overwriting the IP Table, the existing table from the default program is irrelevant.
Austin Weygandt 7.1 47
Austin Weygandt 10.1 48
Austin Weygandt 11.1 49 Alternatively Loading through Text Console:
Austin Weygandt 7.1 50
Austin Weygandt 11.1 51 Using File Manager, copy the contents of the NVRAM folder into the NVRAM folder of the GLPAC. (These files are read on program load, so do this before or the program needs to be restarted)
52
53 Using Text Console, connect to the GLPAC and click the lightning bolt in the bottom left, then select SIMPL Program
54
Austin Weygandt 7.1 55 [[image:1658338182116-487.png||height="179" width="447"]]
56
57 Browse for the .spz file and click "Send". Make sure to check the "Send SIG File" box at the bottom to allow future debugging if necessary.
58
59 [[image:1658338381847-812.png||height="472" width="418"]]
60
61
Austin Weygandt 12.1 62 Once the program is loaded, use Toolbox > Network Device Tree to change the Cresnet IDs of the attached devices