Changes for page ShowRunnerCLC™ Keypad Types

Last modified by Alexander Mott on 2024/05/13 15:02

From 127.1 to 126.2 From 132.1 to 131.1

From version 131.1

edited by Alexander Mott
on 2022/08/23 22:06

Change comment: There is no comment for this version

To version 127.1

edited by Alexander Mott
on 2022/08/23 21:44

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (2 modified, 0 added, 0 removed)
Attachments (0 modified, 0 added, 2 removed)
- cameo az.gif
- hz az.gif

Details

Page properties

Hidden

@@ -1,1 +1,1 @@
--false
++true

Content

@@ -34,7 +34,7 @@
  | | | |
  | | | |
  | | | |
--|(% rowspan="10" %)[[image:cameo az.gif]]|**AZ-Type**|(% colspan="4" %)**Button Functions**
++|(% rowspan="10" %)[[image:cameo a,ah,b.png]]|**AZ-Type**|(% colspan="4" %)**Button Functions**
  |(% rowspan="4" %)Variable 4 to 8-button Load Toggle/Dim keypad with All On/Off
  (automatically selects layout based on number of loads in area)|**Button**|**Label**|**Press**|**Hold**
  |1-7|Zone #|Toggle Load #|Cycle Raise/Lower Load #
@@ -249,7 +249,7 @@
  | | | |
  | | | |
  | | | |
--|(% rowspan="10" %)[[image:hz az.gif]]|**Horizon AZ-Type**|(% colspan="4" %)**Button Functions**
++|(% rowspan="10" %)[[image:hz a,ah,b.png]]|**Horizon AZ-Type**|(% colspan="4" %)**Button Functions**
  |(% rowspan="4" %)Variable 4 to 8-button Load Toggle/Dim keypad with All On/Off
  (automatically selects layout based on number of loads in area)|**Button**|**Label**|**Press**|**Hold**
  |1-8|Zone #|Toggle Load #|Cycle Raise/Lower Load #
@@ -678,160 +678,7 @@
  = X-Type Keypads =
--The showrunner™ X-Type keypad is a customizable keypad type available for Cameo, Horizon, GLPPA-KP, and Zūm Wired keypads. See[[ this document>>attach:showrunnerKeypadStyles.pdf]] for a list of possible keypad layouts for all keypad types. Instructions for configuring X-Type keypads from the showrunnerHUB UI are available [[here>>https://wiki.chiefintegrations.com/download/SHOWRUNNER%E2%84%A2%20Setup%20Guide/showrunnerHUB%E2%84%A2/Keypad%20Configuration/WebHome/CI%20Keypad%20Editor%20UI%20Guide.pdf?rev=1.2]].
++The showrunner™ X-Type keypad is a customizable keypad type available for Cameo, Horizon, GLPPA-KP, and Zūm Wired keypads.
--The table below is a comprehensive list of actions which can be used to manually configure X-Type keypads from the SrConfig.json file. The table was generated using showrunner™ v3.019, but can be viewed for any version of showrunner™ by connecting to a processor running the desired version of showrunner™ and running the command: ##sr sh ac##
--
--Note that actions with "None" listed under "Triggers" are read-only and are only able to be used for keypad or keyswitch feedback.
--
--(% class="table-condensed" %)
--|** Type**|**Action**|**Action Description**|**Reference Property**|**Reference Required**|**Triggers**|**Supported Properties**
--|EDmxReceiver|Disable|Turns off E-DMX Receiver|n/a|False|Digital, Analog|n/a
--|EDmxReceiver|Enable|Turns on the E-DMX Receiver|n/a|False|Digital, Analog|n/a
--|EDmxReceiver|UpdateLoadsDisable|Disables the transfer of E-DMX Values to hardware loads|n/a|False|Digital, Analog|n/a
--|EDmxReceiver|UpdateLoadsEnable|Enables the transfer of E-DMX Values to hardware loads|n/a|False|Digital, Analog|n/a
--|GlobalActions|CctSourceSensor|Select which sensor the system will accept CCT values from|SensorId|True|Digital, Analog|'SensorId':(Integer)'Id of the sensor to use as reference'
--|GlobalActions|DemandResponseOff|Turns demand response off system wide|n/a|False|Digital, Analog|n/a
--|GlobalActions|DemandResponseOn|Turns demand response system wide|n/a|False|Digital, Analog|n/a
--|GlobalActions|Execute|Executes the global action|ActionId|True|Digital, Analog|'ActionId':(Integer)'Action to recall'
--|GlobalActions|ExecuteLastEvent|Executes the last event that fired before the current time globally and in each group|n/a|False|Digital, Analog|Global':(Boolean)'Recall last global event'
--'GroupUniqueIds':(String)'Limits group IDs to those specified in the list. Specify n/a if all groups or comma separated list of UniqueIDs'
--|GlobalActions|Log|Adds an entry to the system log|n/a|False|Digital, Analog|Message':(String)'Message to add to the log'
--'Severity':(String)'Severity, default to 'Notice' if not specified. Valid values: Notice ~| Warn ~| Error ~| Exception'
--|GlobalActions|MasterOff|Turns off areas system wide|n/a|False|Digital, Analog|n/a
--|GlobalActions|MasterOn|Turns On areas system wide|n/a|False|Digital, Analog|n/a
--|GlobalActions|MasterOverrideOff|Deactivates the system wide override|n/a|False|Digital, Analog|n/a
--|GlobalActions|MasterOverrideOn|Activates the system wide override|n/a|False|Digital, Analog|n/a
--|GlobalActions|NodeOff|Turns off areas system wide|n/a|False|Digital, Analog|'NodeId':(String)'GUID of the Node'
--|GlobalActions|NodeOn|Turns On areas system wide|n/a|False|Digital, Analog|'NodeId':(String)'GUID of the Node'
--|GlobalActions|RemoteGlobalExecute|Execute a global action on a remote system|n/a|False|Digital, Analog|GlobalActionId':(Integer)'Global Action Id on the Remote System to execute'
--'RemoteSystemId':(Integer)'System ID of the Remote System'
--|GlobalActions|SchedulerDisable|Disables the scheduler|n/a|False|Digital, Analog|n/a
--|GlobalActions|SchedulerEnable|Enables the scheduler|n/a|False|Digital, Analog|n/a
--|GlobalActions|TagOff|Turns off areas system wide|n/a|False|Digital, Analog|'TagId':(String)'GUID of the Tag'
--|GlobalActions|TagOn|Turns On areas system wide|n/a|False|Digital, Analog|'TagId':(String)'GUID of the Tag'
--|Load|CctLower|Lowers the CCT for a CCT load|n/a|False|Digital, Analog|n/a
--|Load|CctRaise|CctRaises the light level on the load|n/a|False|Digital, Analog|n/a
--|Load|CctRaiseLower|Raises/Lowers the CCT on the load|n/a|False|Digital, Analog|n/a
--|Load|CctStop|Stop CCT raise/lower on the load|n/a|False|Digital, Analog|n/a
--|Load|Disable|Turns off the load and prevents it from being controlled|n/a|False|Digital, Analog|n/a
--|Load|Enable|Enables the load and allows normal operation|n/a|False|Digital, Analog|n/a
--|Load|Lower|Lowers the load|n/a|False|Digital, Analog|n/a
--|Load|LowerScene|Lowers all loads that belong to a scene|SceneId|True|Digital, Analog|'SceneId':(Integer)'Scene Number to raise'
--|Load|Off|Turns off the load|n/a|False|Digital, Analog|n/a
--|Load|On|Turns on the load|n/a|False|Digital, Analog|n/a
--|Load|OnWithTimeout|Turns on the load for a specified time|Timeout|False|Digital, Analog|'Timeout':(Integer)'Timeout in seconds'
--|Load|OverrideDisable|Deactivates override on the load|n/a|False|Digital, Analog|n/a
--|Load|OverrideEnable|Activates override on the load|n/a|False|Digital, Analog|n/a
--|Load|Raise|Raises the light level on the load|n/a|False|Digital, Analog|n/a
--|Load|RaiseLower|Raise/Lowers the light level on the load|n/a|False|Digital, Analog|n/a
--|Load|RaiseLowerScene|Raises/Lowers all loads that belong to a scene|SceneId|True|Digital, Analog|'SceneId':(Integer)'Scene Number to raise/lower'
--|Load|RaiseScene|Raises all loads that belong to a scene|SceneId|True|Digital, Analog|'SceneId':(Integer)'Scene Number to raise'
--|Load|RecallScene|Recalls the specified scene on this load|SceneId|False|Digital, Analog|'SceneId':(Integer)'Scene Number to recall'
--|Load|ReleaseScene|Releases the scene from the load, functionally turning off any loads that are included in the scene|SceneId|True|Digital, Analog|'SceneId':(Integer)'Scene Number to recall'
--|Load|SceneToggle|SceneToggle switches between two scenes on a load|OnScene|True|Digital, Analog|OffScene':(Integer)'Scene used when toggle triggers the off state'
--'OnScene':(Integer)'Scene used when toggle triggers the on state'
--|Load|SetCct|Recalls the specified Cct on this load|Cct|True|Digital, Analog|Cct':(Integer)'Cct to recall'
--'FadeTime':(Double)'Fade time to recall level over'
--|Load|SetLevel|Recalls the specified level on this load|Level|True|Digital, Analog|FadeTime':(Double)'Fade time to recall level over'
--'Level':(Integer)'Level to recall'
--|Load|SetLevelByByte|Recalls the specified level on this load as a byte|Level|True|Digital, Analog|FadeTime':(Double)'Fade time to recall level over'
--'Level':(Integer)'Level to recall as a byte'
--|Load|Stop|Stop raise/lower on the load|n/a|False|Digital, Analog|n/a
--|Load|StopScene|Releases the scene from the load, functionally turning off any loads that are included in the scene|SceneId|True|Digital, Analog|'SceneId':(Integer)'Scene Number to recall'
--|Load|Toggle|Toggles the load|n/a|False|Digital, Analog|n/a
--|LoadController|OverrideDisable|Deactivates override on the load controller|n/a|False|Digital, Analog|n/a
--|LoadController|OverrideEnable|Activates override on the load controller|n/a|False|Digital, Analog|n/a
--|LoadController|RecallScene|Recalls the specified scene on this load|SceneId|False|Digital, Analog|'SceneId':(Integer)'Scene Number to recall'
--|LoadController|ReleaseScene|Releases the specified scene on this load controller|SceneId|False|Digital, Analog|'SceneId':(Integer)'Scene Number to Release'
--|OutputSignal|Disable|Disables the output signal|n/a|False|Digital, Analog|n/a
--|OutputSignal|Enable|Enables the output signal|n/a|False|Digital, Analog|n/a
--|PartitionSensor|Combined|Reports the sensor is combined|n/a|False|None|n/a
--|PartitionSensor|Disable|Disables the paritition sensor|n/a|False|Digital, Analog|n/a
--|PartitionSensor|Divided|Reports the sensor is Divided|n/a|False|None|n/a
--|PartitionSensor|Enable|Enables the partition sensor|n/a|False|Digital, Analog|n/a
--|PartitionSensor|ModeAuto|Sets the sensor to auto mode|n/a|False|Digital, Analog|n/a
--|PartitionSensor|ModeCombined|Sets the sensor to combined mode|n/a|False|Digital, Analog|n/a
--|PartitionSensor|ModeDivided|Sets the sensor to divided mode|n/a|False|Digital, Analog|n/a
--|Photocell|AboveThreshold|Photocell reading is above the threshold (it's bright out)|n/a|False|None|n/a
--|Photocell|BelowThreshold|Photocell reading is below the threshold (it's dark out)|n/a|False|None|n/a
--|Photocell|Disable|Disables the photocell sensor|n/a|False|Digital, Analog|n/a
--|Photocell|Enable|Enables the photocell sensor|n/a|False|Digital, Analog|n/a
--|Shade|Close|Closes the shade|n/a|False|Digital, Analog|n/a
--|Shade|JogClose|Jog Close the shade|JogTime|True|Digital, Analog|'JogTime':(Integer)'Time to Jog in ms'
--|Shade|JogOpen|Jog Open the shade|JogTime|True|Digital, Analog|'JogTime':(Integer)'Time to Jog in ms'
--|Shade|Lower|Lowers the shade|n/a|False|Digital, Analog|n/a
--|Shade|NextPreset|Steps to the next preset on the shade, goes back to start if at end|n/a|False|Digital, Analog|n/a
--|Shade|Open|Opens the shade|n/a|False|Digital, Analog|n/a
--|Shade|PreviousPreset|Steps to the Previous preset on the shade, goes back to end if at start|n/a|False|Digital, Analog|n/a
--|Shade|Raise|Raises the shade|n/a|False|Digital, Analog|n/a
--|Shade|SetPosition|Sets the position of the shade|Position|True|Digital, Analog|'Position':(Integer)'Position of the shade 0-65535'
--|Shade|Stop|Stop raise/lower on the load|n/a|False|Digital, Analog|n/a
--|Shade|Toggle|Toggles the shade between open and close|n/a|False|Digital, Analog|n/a
--|LoadGroup|Disable|Turns off the load and prevents it from being controlled|n/a|False|Digital, Analog|n/a
--|LoadGroup|Enable|Enables the load and allows normal operation|n/a|False|Digital, Analog|n/a
--|LoadGroup|Lower|Lowers the load|n/a|False|Digital, Analog|n/a
--|LoadGroup|Off|Turns off the load|n/a|False|Digital, Analog|n/a
--|LoadGroup|On|Turns on the load|n/a|False|Digital, Analog|n/a
--|LoadGroup|OnWithTimeout|Turns on the load group for a specified time|Timeout|False|Digital, Analog|'Timeout':(Integer)'Timeout in seconds'
--|LoadGroup|OverrideDisable|Deactivates override on the load|n/a|False|Digital, Analog|n/a
--|LoadGroup|OverrideEnable|Activates override on the load|n/a|False|Digital, Analog|n/a
--|LoadGroup|Raise|Raises the light level on the load|n/a|False|Digital, Analog|n/a
--|LoadGroup|RaiseLower|Raise/Lowers the light level on the load|n/a|False|Digital, Analog|n/a
--|LoadGroup|RaiseLowerScene|Raises/Lowers all loads that belong to a scene|SceneId|True|Digital, Analog|'SceneId':(Integer)'Scene Number to raise/lower'
--|LoadGroup|RecallScene|Recalls the specified scene on this load|SceneId|False|Digital, Analog|'SceneId':(Integer)'Scene Number to recall'
--|LoadGroup|ReleaseScene|Releases the scene from the load, functionally turning off any loads that are included in the scene|SceneId|True|Digital, Analog|'SceneId':(Integer)'Scene Number to recall'
--|LoadGroup|SceneToggle|SceneToggle switches between two scenes on a load|OnScene|True|Digital, Analog|OffScene':(Integer)'Scene used when toggle triggers the off state'
--'OnScene':(Integer)'Scene used when toggle triggers the on state'
--|LoadGroup|SetCct|Recalls the specified Cct on this load|Cct|True|Digital, Analog|'Cct':(Integer)'Cct to recall'
--|LoadGroup|SetLevel|Recalls the specified level on this load|Level|True|Digital, Analog|FadeTime':(Double)'Fade time to recall level over'
--'Level':(Integer)'Level to recall'
--|LoadGroup|Stop|Stop raise/lower on the load|n/a|False|Digital, Analog|n/a
--|LoadGroup|StopScene|Stops the raise/lower on any load that is included in the scene|SceneId|True|Digital, Analog|'SceneId':(Integer)'Scene Number to affect'
--|LoadGroup|Toggle|Toggles the load|n/a|False|Digital, Analog|n/a
--|ShadeGroup|Close|Closes the shade|n/a|False|Digital, Analog|n/a
--|ShadeGroup|NextPreset|Steps to the next preset on the shade, goes back to start if at end|n/a|False|Digital, Analog|n/a
--|ShadeGroup|Open|Opens the shade|n/a|False|Digital, Analog|n/a
--|ShadeGroup|PreviousPreset|Steps to the Previous preset on the shade, goes back to end if at start|n/a|False|Digital, Analog|n/a
--|ShadeGroup|Stop|Stop raise/lower on the load|n/a|False|Digital, Analog|n/a
--|BaseKeypad|Disable|Disables the keypad|n/a|False|Digital, Analog|n/a
--|BaseKeypad|Enable|Enables the keypad|n/a|False|Digital, Analog|n/a
--|BaseKeypad|EnableToggle|Toggles Enable for the keypad|n/a|False|Digital, Analog|n/a
--|BaseKeypad|MasterRaiseLowerReference|Evaluates to see if the referenced HostGlobalId is in the master raise/lower list|GlobalIds|True|None|'GlobalIds':(String)'GlobalIds to reference when comparing to see if master raise/lower is active. Use comma/dash separated list of numbers.'
--|Area|CancelTimeout|Cancel Timeout operation|n/a|False|Digital, Analog|n/a
--|Area|ExtendOccupancyTimeoutSetting|Extend the Occupancy Timeout Setting in the area|Timeout|True|Digital, Analog|'Timeout':(Integer)'Timeout in seconds'
--|Area|Lower|Lowers the area|n/a|False|Digital, Analog|n/a
--|Area|LowerScene|Lowers all loads that belong to a scene|SceneId|True|Digital, Analog|'SceneId':(Integer)'Scene Number to lower'
--|Area|OccupancyMode|Changes the occupancy mode of an area|Mode|True|Digital, Analog|'Mode':(String)'Name of the mode'
--|Area|Occupied|Reports the occupied status of an area|n/a|False|None|n/a
--|Area|Off|Turns off the area|n/a|False|Digital, Analog|n/a
--|Area|On|Turns on the area|n/a|False|Digital, Analog|n/a
--|Area|OnWithTimeout|Turns on the area for a specified time|Timeout|False|Digital, Analog|'Timeout':(Integer)'Timeout in Seconds'
--|Area|OverrideDisable|Deactivates override on the area|n/a|False|Digital, Analog|n/a
--|Area|OverrideEnable|Activates override on the area|n/a|False|Digital, Analog|n/a
--|Area|Raise|Raises the light level on the area|n/a|False|Digital, Analog|n/a
--|Area|RaiseLower|Raise/Lowers the light level on the area|n/a|False|Digital, Analog|n/a
--|Area|RaiseLowerScene|Raises/Lowers all loads that belong to a scene|SceneId|True|Digital, Analog|'SceneId':(Integer)'Scene Number to raise/lower'
--|Area|RaiseScene|Raises all loads that belong to a scene|SceneId|True|Digital, Analog|'SceneId':(Integer)'Scene Number to raise'
--|Area|RecallLastLevel|Turns RecallLastLevel the area|n/a|False|Digital, Analog|n/a
--|Area|RecallScene|Recalls the specified scene on this load|SceneId|False|Digital, Analog|'SceneId':(Integer)'Scene Number to recall'
--|Area|ReleaseScene|Releases the scene from the load, functionally turning off any loads that are included in the scene|SceneId|True|Digital, Analog|'SceneId':(Integer)'Scene Number to recall'
--|Area|SceneCycle|SceneCycle steps through a list of scenes|OnScene|True|Digital, Analog|OnScene':(Integer)'Scene used to indicate feedback'
--'SceneList':(String)'Comma and dash delimited list of scenes to cycle through'
--|Area|SceneToggle|SceneToggle switches between two scenes on an area|OnScene|True|Digital, Analog|OffScene':(Integer)'Scene used when toggle triggers the off state'
--'OnScene':(Integer)'Scene used when toggle triggers the on state'
--|Area|SetCct|Recalls the specified Cct on this area|Cct|True|Digital, Analog|'Cct':(Integer)'Cct to recall'
--|Area|SetCctAuto|Sets the CCT Mode to auto|n/a|False|Digital, Analog|n/a
--|Area|ShadeClose|Close All Area Shades|n/a|False|Digital, Analog|n/a
--|Area|ShadeOpen|Open All Area Shades|n/a|False|Digital, Analog|n/a
--|Area|ShadeStop|Stop All Area Shades|n/a|False|Digital, Analog|n/a
--|Area|Stop|Stop raise/lower on the area|n/a|False|Digital, Analog|n/a
--|Area|StopScene|Stops the raise/lower on any load that is included in the scene|SceneId|True|Digital, Analog|'SceneId':(Integer)'Scene Number to affect'
--|Area|Toggle|Toggles the area on/off|n/a|False|Digital, Analog|n/a
--|Keyswitch|Active|Reports the keyswitch state|n/a|False|Digital, Analog|n/a
--|Keyswitch|Disable|Disables the keyswitch|n/a|False|Digital, Analog|n/a
--|Keyswitch|Enable|Enables the keyswitch|n/a|False|Digital, Analog|n/a
--|Occupancy|Disable|Disables the occupancy sensor|n/a|False|Digital, Analog|n/a
--|Occupancy|Enable|Enables the occupancy sensor|n/a|False|Digital, Analog|n/a
--|Occupancy|Occupied|Reports the occupied status of an occupancy sensor|n/a|False|None|n/a
++See[[ this document>>attach:showrunnerKeypadStyles.pdf]] for a list of possible keypad layouts for all keypad types. Instructions for configuring X-Type keypads from the showrunnerHUB UI are available [[here>>https://wiki.chiefintegrations.com/download/SHOWRUNNER%E2%84%A2%20Setup%20Guide/showrunnerHUB%E2%84%A2/Keypad%20Configuration/WebHome/CI%20Keypad%20Editor%20UI%20Guide.pdf?rev=1.2]].
  )))

cameo az.gif

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.alexander\.mott@chiefintegrations\.com

Size

...	...	@@ -1,1 +1,0 @@
1		-32.1 KB

Content

hz az.gif

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.alexander\.mott@chiefintegrations\.com

Size

...	...	@@ -1,1 +1,0 @@
1		-42.1 KB

Content