Wiki source code of Features

Version 4.1 by Mark Kohlmann on 2020/09/02 21:04

Hide last authors
Mark Kohlmann 1.1 1 SHOWRUNNER™ has a large number of features focused on the needs of the commercial lighting market.
2
3 === Features ===
4
5 * Lighting Controls grouped into Areas
6 * Scene recall and master raise/lower by area
7 * User configurable scene name, fade time, and load include by area
8 * Individual load control within an area
9 * Select area from touchpanel, areas can be restricted by panel
10 * RGB controls for applicable fixtures, saved per scene
Mark Kohlmann 2.1 11 * Configurable Load Grouping for load consolidation including linked/group area loads
Mark Kohlmann 1.1 12 * Dynamic White/Circadian Rhythm CCT Control
13 ** CCT Control per area for applicable fixtures
14 ** Global schedule for CCT, astronomical and/or fixed schedules
15 ** Manual CCT override per area
16 ** Custom CCT curves per load or default algorithm
17 ** Min/Max CCT per load
18 ** Support for Warm/Cool or Intensity/CCT fixture types
19 ** Configurable automatic fixture shut off if outside CCT range
Mark Kohlmann 2.1 20 ** Crestron GLS-LCCT sensor integration for daylight tracking
Mark Kohlmann 1.1 21 * Sophisticated Scheduling Engine
22 ** Configurable Actions by Area
23 *** Scene
24 **** Override Scene Fade Time
25 *** Change Keypad State (Enable/Disable/Disable Off)
26 *** Change Occupancy Mode (Occupancy/Vacancy/Disable/Last)
27 *** Switch between Normal and After Hours (for Timeout)
28 *** Change CCT Mode (Auto/Manual)
29 *** Assign Manual CCT
30 *** Extend Occupancy Timeout
31 *** Change Scenes Recalled by Occupied/Vacant/On/Off
32 *** Shade Command (Open/Close)
33 *** Plug Load Mode (Off/On/Auto)
34 ** Copy Actions from Area to Area
35 ** AM, PM, and Astronomical (Sunrise/Sunset) Time References
36 ** Event Verification by Date in real-time with month calendar view and event description
37 ** Advanced Scheduling Feature (Licensed)
38 *** Event Include and/or Exclude by Calendar(s) and/or Calendar Group(s)
39 *** Calendar Groups consist of one or more Calendars
40 *** Calendars can be based on a Date Range or Date Pattern
41 *** Calendar Properties:
42 **** Date Range:
43 ***** Start and End Dates or Specific Dates selected using Date Picker
44 ***** Does this Recur Annually
45 **** Date Pattern:
46 ***** Year - Restrict to specific year or none
47 ***** Month - Restrict to specific Month(s) or none
48 ***** Week - Restrict to specific Week of the month or none
49 ***** Week Day - Restrict to specific day of the week or none
50 ***** Day - Restrict to a specific day of the month or none
51 ***** Optional: Offset - Offset date based on restrictions
52 ***** Optional: Calculate Observed Weekday Date Before, After, or BeforeOrAfter
53 **** Enable/Disable
54 *** Pre-loaded with US Federal and common non-Federal US Holidays
55 * Keypads
56 ** Support for common fixed configurations, user assignable
57 ** Custom keypads with configurable actions per button
58 ** User configurable area to control
59 * Occupancy Sensors:
60 ** Occupancy configuration for CN type occupancy sensors
61 ** ​3rd Party and Non-System occupancy sensor support
62 ** Occupancy/Vacancy/Disabled modes, user configurable
63 ** Configure scenes recalled by area for occupancy and vacancy states
64 ** Individual max unoccupied level by load for IECC 2018 C405.2.1.3 compliance
65 ** User configurable assignment of sensor to area(s) and load(s)
66 ** Occupancy sensors may feed data to multiple areas and loads
67 * Partition sensors
68 ** Support for divisible areas
69 ** GLS-PART-CN with adjustable sensitivity
70 ** 3rd party sensor support via versiport input
71 ** User configurable Auto, Combined, and Divided modes to override occ sensor, activated by UI or keypad
72 * Maintained and Momentary Keyswitch/FACP/Override Input for scene recall or override activation
73 * Demand Response/Load Shedding
74 ** Automatic via sensor input
75 ** Manually via keypad
76 * Configurable maximum demand response level by load
77 * Dynamic addition/deletion/assignment/configuration of loads
78 * Dynamic addition/deletion of areas
79 * User editable labeling of areas, loads, keypads, occupancy sensors, and schedules
80 * Daylight Harvesting sensor to load assignment and settings adjustment
81 * Global User and Technician Passcodes, user configurable.
82 * User configurable time zone, location, and current time
83 * Addressing/Grouping/Driver Replacement for DALI.  DALI groups are referenced by their controlled load simplifying addressing and replacement procedures.
84 * Addressing and Verification of Cresnet devices by serial number
85 * Cresnet Device Serial Number capture
86 * Configurable Global Actions with touchpanel trigger
87 * User configurable Crestron EISC Integration with ability to change IP Address and IP-ID of remote Crestron system as well as Areas shared on the fly.  RSD file is automatically generated and link is provided for downloading of RSD file.
88 * Remote hardware support from neighbor ShowRunner System:
89 ** ​Allows a master ShowRunner system to integrate slave processors
90 ** AV Serial Interface
91 ** Loads
92 ** Controllers
93 ** Keypad
94 ** Keyswitches
95 ** Occupancy Sensor (including setup for Cresnet sensors)
96 ** Partition Sensors (including setup for Cresnet sensors)
97 ** Photocells
98 * Web based reporting directly from the processor allows generation of as built documentation: Cresnet Discovery, Device Status, Event Schedule, Keypad Schedule, Load Schedule, and Panel Schedule
99
100 === Integrations ===
101
102 * AV Integration protocol via serial port
103 * BACNET Support for integration of Areas, Loads (Licensed Feature)
104 * Crestron Fusion (Licensed Feature)
Mark Kohlmann 4.1 105 * E-DMX Receive - Receive DMX (SACN or Art-Net) and translate to ShowRunner Loads
Mark Kohlmann 1.1 106 * EISC Export for AV Integration, dynamic creation from the UI (3-series or classic)
107 * Zum Floor Hub Support for integration, Export SHOWRUNNER™ areas to the Floor Hub (Licensed Feature)
108
109 === Reporting ===
110
111 ShowRunner provides a website via the processor's internal webserver with the following reports.  All data is live at the time of the generation of the report.
112
113 * Area Load Schedule - Load schedule by Area
114 * Area Scene Schedule - Scene settings by Area
115 * Area - Areas defined
116 * Cresnet Discovery - Performs an auto-discovery on every attached Cresnet bus and returns the results in a table.  Duplicates are identified.
117 * Device Status - Provides Cresnet, Ethernet, and Device online status and associated devices.  Cresnet devices include Serial Number [TSID] and version #.
118 * Event Schedule - Provides configured lat/lon, timezone, sunrise and sunset for current date, scheduled events with associated actions, and Calendars (Advanced Calendaring)
119 * Keypad Schedule - Provides a list of keypads with Model, Name, Type, Connection Details, Enabled Status, Online Status, settings, and custom actions (if defined)
120 * Load Schedule - Provides a list of loads per module per panel with connection information and settings.  Report is grouped by panel and module.
121 * Panel Schedule - Provides a list of lighting modules by panel with module type, label, and connection information.