Changes for page Features

Last modified by Scott Kohlmann on 2023/04/21 15:15

From 5.1 to 4.2 From 9.1 to 8.1

From version 8.1

edited by Mark Kohlmann
on 2022/10/17 20:43

Change comment: There is no comment for this version

To version 5.1

edited by Mark Kohlmann
on 2022/10/14 23:43

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

@@ -1,22 +1,5 @@
--showrunner™ is a commercial lighting control and lighting management system.  showrunner™ contains a large number of features focused on the needs of the commercial lighting and hospitality markets and is adaptable to the residential market.  Hardware support is extensive and growing all the time.  This document is not a complete feature list and Chief Integrations reserves the right to make modifications at any time.
++showrunner™ has a large number of features focused on the needs of the commercial lighting and hospitality markets and is adaptable to the residential market.  Hardware support is extensive and growing all the time.
--{{box cssClass="floatinginfobox"}}
--(% class="wikigeneratedid wikigeneratedheader" id="HTableofContents" %)
--**CONTENTS**
--
--{{toc start="4"/}}
--{{/box}}
--
--==== Key Capabilities ====
--
--* Configuration driven with runtime adaptability enables rapid commissioning of commercial lighting systems
--* Extensive feature set allows Crestron systems to comply with the majority of DIV 26s and customer requirements
--* Large native hardware support with the ability to extend support to new hardware quickly and easily
--* Touchpanel and web based UIs cover users' needs
--* Runs entirely on a Crestron processor or VC-4 eliminating the need to manage expensive servers
--* Floorplans with pinch, zoom, and insight!
--* Powerful scheduling capabilities enable set and forget scheduling of lighting and easy management to handle changes
--
  ==== Area Features ====
  * Lighting Loads
@@ -25,7 +25,7 @@
  * User configurable scene name, fade time, and load include by scene
  * Individual scenes may be locked to prevent changing their settings
  * Individual load control within an area
--* Area selection from touchpanel, areas can be restricted by panel
++* Select area from touchpanel, areas can be restricted by panel
  * RGB controls for applicable fixtures, saved per scene
  * Configurable Load Grouping for load consolidation including linked/group area loads
  * Dynamic White/Circadian Rhythm CCT Control
@@ -85,7 +85,7 @@
  * Demand Response Level
  * Enable/Disable/Override states
  * Option to ignore long fade times if the loads is off
--* Option to recall last on level
++* Option recall last level
  * Individual daylight harvesting settings, enabled/disabled by scene
  ** Open/closed loop
  ** Min/Max levels
@@ -105,9 +105,10 @@
  * DALI (DIN-DALI-2/ZUMNET-JBOX-DALI Legacy mode)
  ** Addressing/Grouping/Driver Replacement for DALI.  DALI groups are referenced by their controlled load simplifying addressing and replacement procedures.
++(% class="wikigeneratedid" %)
  ==== Scheduling Features ====
--* Algorithm based scheduling engine ensures predictable operation year after year with no need to define a system wide schedule per-day
++* Algorithm based scheduling engine ensures predictable operation year after year with no need to specifically specify each day
  * Area and/or Tag based schedules
  * Individual global events or grouped events
  * showrunner™ HUB UI Features
@@ -150,7 +150,6 @@
  **** Optional: Calculate Observed Weekday Date Before, After, or BeforeOrAfter
  *** Enable/Disable
  ** Pre-loaded with US Federal and common non-Federal US Holidays
--** Support for additional algorithms available upon request
  ==== Circadian Rhythm/Dynamic White ====
@@ -168,7 +168,7 @@
  *** Static
  *** Linear change over time
  *** Sensor with configured CCT when sensor is out of range
--* Supported with 0-10V, DMX, and DALI.  Additional support via APIs
++* Supported with 0-10V, DMX, and DALI
  ==== Supported Hardware Features ====
@@ -184,7 +184,7 @@
  ** Support for some Crestron Thermostats, more can be added as needed
  ** Support for some 3rd party systems, more can be added as needed
  * Keypads
--** Support for common fixed configurations, user assignable at runtime.  Includes all standard Crestron SpecsBuilder types.
++** Support for common fixed configurations, user assignable at runtime
  ** Custom keypads with configurable actions per button at runtime
  *** Graphic based programming using showrunner™ HUB UI
  *** Master raise/lower button support allows assignment of currently selected load/shade/area/etc
@@ -211,13 +211,12 @@
  *** Scene Recall for Active and Inactive States
  *** Demand Response
  *** Actions for Active and Inactive States
--** Commonly used for FACP, override, demand response, and panic inputs
  * Occupancy Sensors:
  ** Occupancy configuration for CN and ZUMLINK occupancy sensors
  ** 3rd Party and Non-System occupancy sensor support
  ** Occupancy/Vacancy/Disabled/Use Hardware Logic modes, user configurable
  ** Configure scenes recalled by area for occupancy and vacancy states
--** Individual max unoccupied level by load for IECC 2018 C405.2.1.3 compliance (open office 600sqft)
++** Individual max unoccupied level by load for IECC 2018 C405.2.1.3 compliance
  ** User configurable assignment of sensor to area(s) and load(s)
  ** Occupancy sensors may feed data to multiple areas and loads
  ** Last occupied and vacant times recorded
@@ -231,10 +231,9 @@
  ** Support for divisible areas
  ** GLS-PART-CN with adjustable sensitivity
  ** 3rd party sensor support via hardware inputs
--** User configurable Auto (use sensor) with manual override for Combined and Divided
++** User configurable Auto, Combined, and Divided
  ** Filtering to ignore noisy partition sensors
--** Change count and last change recorded help troubleshoot
--** Hardware not required, may be setup as a virtual sensor
++** Change count and last change recorded
  * Photocell
  ** Supports Open Loop, Closed Loop, Exterior, and LCCT (as SolarSync™ and exterior)
  ** Configurable coefficient
@@ -241,25 +241,13 @@
  ** Configurable thresholds
  ** Assignable to individual loads for daylight harvesting
  * Serial Interface
--** RS-232/422/484 depending on hardware
++** RS-232/422/484
  ** Configurable Baud Rate and Com settings
--** Simple ASCII API for controlling/monitoring
++** Simple ASCII API for controlling/montioring
  ** Areas/Loads/Occupancy/Partition/Shades supported
  * Shades
  ** Support for Crestron shades/drapes
  ** Support for many 3rd party shade and drape systems
--* Zum Wired
--** Edge logic operation in Zum App mode
--*** Override occupancy logic and use showrunner™ logic
--** Central logic in CNET mode
--** Cresnet devices attached to ZUMNET-JBOXs in either Edge or Central modes
--* Zum Wireless
--** Override keypad buttons (except buttons 5-6)
--** Edge logic operation
--** Override occupancy behavior with showrunner™ logic
--** Direct load control
--** Scene save
--* Support for configuring hardware symbol properties on Crestron hardware
  ==== Energy Efficiency ====
@@ -280,52 +280,19 @@
  ** HTTPS enforced
  ** Auto session timeout
  ** Login via username/password or PIN code
--** Support for Processor and internal user database with configurable priority or specify one exclusively
++** Support for Processor or internal user database
  ** Best practices for password handling
  * API using AWSv4 scheme for authentication per request for maximum security
--* Encrypted storage of all credentials and keys
--==== General Features ====
++==== System Features ====
  * User configurable time zone, location, and current time
  * Addressing and Verification of Cresnet devices by serial number
  * Cresnet Device Serial Number capture
++* Configurable Global Actions with touchpanel trigger
  * Extensive console command interface (CLI)
--* Simulate sensor and keypad inputs to test without hardware
--* DHCP server on single LAN processors allows setup of isolated networks without additional DHCP server.
--Note: DHCP server is not designed to be used in production and will automatically be disabled on a reboot, use for setup only.
--==== Diagnostics ====
--
--* Provides diagnostic data when supported by hardware
--* Diagnostics available from load controllers all the way up to Cresnet bridges
--* Status indications quickly assist with identifying severity of the problem: Normal, Warning, Critical, Status Only
--
--==== Discovery ====
--
--* Discover and automatically define Zum Wired hardware
--* Discover and automatically define Zum Wireless hardware
--* Discover Cresnet devices connected to the system, automatic addressing for configured hardware by serial number
--* Discover and claim select Crestron Ethernet devices connected to the local network, automatic IP Table setup when claiming
--
--==== Event Log ====
--
--* Central logging mechanism
--* Messages time stamped
--* CSV format
--* Multiple logging levels: Critical, Error, Warning, Information, Debug, Trace
--* Filter by logging level
--* Filter by source object
--* Filter by GlobalId
--* Trace option allows tracking the triggering event through execution
--* Thread option allows tracking of the thread executing
--* Logging to console
--* Logging to file
--* Logging to remote syslog (via processor)
--* Heartbeat option with configurable interval
--* Debugging writes to the event log
--* Global Enable flag
--
++(% class="wikigeneratedid" %)
  ==== Extensibility ====
  * Actions
@@ -336,13 +336,13 @@
  ** Extension model allows customization and additional functionality to be added to the showrunner™ ecosystem
  ** [[Supported functions>>doc:SHOWRUNNER™ Integrations Guide.Integration Options.Extensions.WebHome]]
  * Global Actions
--** Allow manual or input triggered operations against the system
++** Allow minimal or input triggered operations against the system
  ** Can be custom programmed at runtime
  ==== User Interfaces ====
  * showrunner™ HUB
--** Web based, touch and mouse friendly design
++** Web based
  ** Runs directly on the processor or VC-4 instance
  ** HTTPS required
  ** Can be run in kiosk mode on a touchscreen PC for the full touchscreen experience
@@ -388,55 +388,17 @@
  *** Global Actions - Add/Delete/Configure
  *** Integrations - Manage integrations with other showrunner™ systems
  *** Keypad Configuration - Configure keypads
--*** Maps - Add/Manage floorplan images
++*** Maps - Add floorplan images
  *** Network - DHCP Server (for processors without routers only)
  *** System Settings - Manage various system settings
  *** Tags - Manage tags and association of tags with areas
  *** User Management - Manage users/groups/API users
  * Crestron TS/TSWs and Crestron App (iPad/iPhone/Android)
--** Area Control Screen
--*** Select Area (Can be disabled or restricted)
--*** Divide/Combine status, if divisible
--*** Occupancy/vacancy status, if has an occupancy sensor
--*** Individual load controls
--*** Dynamic white color temperature control, if supported
--*** RGB color picker, if load supported
--*** Scenes, up to 20, save with press and hold
--*** Master Raise/Lower
--*** Global Actions, if defined, can be hidden
--*** HVAC controls, if supported
--*** Shade controls, if supported
--*** Passcode protected, if enabled
--** Setup Screen
--*** Passcode protected, if enabled
--*** Area Configuration
--**** Area List
--**** Area Name, editable
--**** Load Configuration - Configure load control type and labeling, test fixture operation
--**** Occupancy Setup - Configure area occupancy behavior and occupancy settings
--**** Daylight Harvesting - Configure daylight harvesting settings per load/scene
--**** Scene Setup - Configure and add/delete scenes
--**** Properties - Configure area behavior settings
--**** Add/Delete areas
--*** Area Layout - Configure partition sensors and area assignments to partition sensors
--*** Crestron Integration - Configure EISCs
--*** Device Addressing - Address and verify Cresnet devices
--*** Keypad Configuration - Configure keypad type, area assignment, and enable status
--*** Load Hardware - Configure loads and load controllers
--*** Location and System Clock - View/Set system clock, site lat/lon, and timezone
--*** Occupancy Assignment - Assign occupancy sensors to loads/areas
--*** Scheduler / Events - Add/Edit/Delete events, configure calendars, configure actions (for non-group events)
--*** Security Settings - Enable/Disable/Change PIN codes
--*** Zum Integration - Configure export to Zum Floor Hub
--*** Help Screen - Support contact information, showrunner version list, and license status
--** Custom Logo option for splash screen
--** Optional floor plan area selection, zoom/pan are NOT supported, static image only
--** Optional partition control on floor plan screen
  === Integrations ===
--* AV Integration protocol via serial port, simple ASCII protocol with feedback
--* BACnet Support for integration of Areas, Loads (Licensed Feature, both showrunner and Crestron)
++* AV Integration protocol via serial port
++* BACNnet Support for integration of Areas, Loads (Licensed Feature, both showrunner and Crestron)
  ** Global
  *** Override
  *** Demand Response
@@ -458,12 +458,12 @@
  **** Scenes
  **** Occupied
  **** Occupancy Sensor Enable
--* Crestron Fusion EM (Licensed Feature)
++* Crestron Fusion (Licensed Feature)
  ** Scenes, Recall and Save
  ** Load Control
  ** Occupancy Status
  ** Photocell
--* e-DMX Receiver
++* E-DMX Receiver
  ** SACN and/or Art-Net
  ** Enable/Disable control for loads using e-DMX channel value
  ** Map DMX to showrunner loads
@@ -472,7 +472,7 @@
  ** Configurable rooms to export, change at runtime
  ** Changes generate new RSD file at runtime that may be provided to the AV programmer
  * HTTP REST API w/ Authorization
--* Lightweight API provides real-time control/feedback using CoAP
++* Lightweight API provides real-time control/feedback of hardware using CoAP
  * TCP Interface using simple ASCII commands, subscriptions supported
  * UDP Receiver using simple ASCII commands
  * Zum Floor Hub Support for integration, Export showrunner™ areas to the Floor Hub (Licensed Feature)
@@ -487,7 +487,7 @@
  ** Partition Sensors (including setup for Cresnet sensors)
  ** Photocells
--==== Reporting ====
++=== Reporting ===
  ShowRunner provides a website via the processor's internal webserver with the following reports.  All data is live at the time of the generation of the report.