Changes for page Features

Last modified by Scott Kohlmann on 2023/04/21 15:15

From 4.1 to 3.1 From 5.2 to 5.1

From version 5.1

edited by Mark Kohlmann
on 2022/10/14 23:43

Change comment: There is no comment for this version

To version 4.1

edited by Mark Kohlmann
on 2020/09/02 21:04

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

@@ -1,12 +1,10 @@
--showrunner™ has a large number of features focused on the needs of the commercial lighting and hospitality markets and is adaptable to the residential market.  Hardware support is extensive and growing all the time.
++SHOWRUNNER™ has a large number of features focused on the needs of the commercial lighting market.
--==== Area Features ====
++=== Features ===
--* Lighting Loads
--* Scene recall
--* Master raise/lower
--* User configurable scene name, fade time, and load include by scene
--* Individual scenes may be locked to prevent changing their settings
++* Lighting Controls grouped into Areas
++* Scene recall and master raise/lower by area
++* User configurable scene name, fade time, and load include by area
  * Individual load control within an area
  * Select area from touchpanel, areas can be restricted by panel
  * RGB controls for applicable fixtures, saved per scene
@@ -15,367 +15,80 @@
  ** CCT Control per area for applicable fixtures
  ** Global schedule for CCT, astronomical and/or fixed schedules
  ** Manual CCT override per area
--* Demand Response with ability to exclude area from Demand Response event
--* Configurable load grouping allows aggregation of loads to a single slider per group, can include linked areas
--* HVAC Control
--* Shades
--* Occupancy Features
--** Occupancy Modes
--*** Occupancy
--*** Vacancy
--*** Disabled
--*** Use Hardware Logic (if supported by edge controller)
--** Extend occupancy timeout by user specified seconds, can be scheduled
--** Configurable occupied and vacant scenes, scheduled
--** Configurable grace occupancy support without needing support in hardware
--* After Hours support for automatic shutoff after configurable timeout w/ alerting
--* Parent Area feature allows one area to trickle down scene recall and raise/lower (if enabled)
--* Last Scene Recall timestamp and triggering action recorded
--* Organized in a node tree with multiple depths
--
--==== Load Features ====
--
--* Dynamically assigned/unassigned at runtime to areas
--* Supported load types
--** Single Channel
--** Dynamic White/CCT
--*** Warm/Cool
--*** Intensity/CCT
--*** DALI Type 8
--*** Pharos Dynamic White
--** RGB/W/A
--*** Color Picker
--*** W/A channels can be controlled individually or mixed (Pharos)
--* Supported load behaviors
--** Dimmable
--** Switched
--** Plug Load
--* Dimming Curves
--** Unaffected
--** Linear
--** Linear No Zero Pass (support for EM lights that are not allowed to turn off i.e. Chicago 10%)
--** Logarithmic
--** Non Dim
--** S Curve
--** Soft Linear
--** Square
--** Always On
--** Inverse Log
--** Custom based on input output ranges
--* Min/Mix Trim, performed in hardware if supported
--* Override Level, performed in hardware if supported
--* Unoccupied Level
--* Demand Response Level
--* Enable/Disable/Override states
--* Option to ignore long fade times if the loads is off
--* Option recall last level
--* Individual daylight harvesting settings, enabled/disabled by scene
--** Open/closed loop
--** Min/Max levels
--** Sensitivity
--** Fade time
--* Loads may track other loads
--* Remap channels for unusual fixture channel mappings
--* Raise/lower, performed with software fade engine if not supported by hardware
--* Dynamic White/Circadian Rhythm CCT
  ** Custom CCT curves per load or default algorithm
  ** Min/Max CCT per load
  ** Support for Warm/Cool or Intensity/CCT fixture types
  ** Configurable automatic fixture shut off if outside CCT range
--** Crestron GLS-LCCT (SolarSync™) sensor integration for daylight tracking
--* Load flashing for identification
--* Verified timestamp option
--* DALI (DIN-DALI-2/ZUMNET-JBOX-DALI Legacy mode)
--** Addressing/Grouping/Driver Replacement for DALI.  DALI groups are referenced by their controlled load simplifying addressing and replacement procedures.
--
--(% class="wikigeneratedid" %)
--==== Scheduling Features ====
--
--* Algorithm based scheduling engine ensures predictable operation year after year with no need to specifically specify each day
--* Area and/or Tag based schedules
--* Individual global events or grouped events
--* showrunner™ HUB UI Features
--** Day/Week/Month/Time Grid views display all events calculated by the scheduler engine
--** Tree based event/event groups
--** View Built-In Calendars and Groups
--** Create/Edit/Delete Custom Calendars and Groups
--* Execute last event on startup (configurable) to bring system in to correct state
--* Configurable Actions
--** Scene w/ option to override fade time
--** Change Keypad State (Enable/Disable/Disable Off)
--** Change Occupancy Mode (Occupancy/Vacancy/Disable/Last/Use Hardware)
--** Switch between Normal and After Hours (for Timeout)
--** Change CCT Mode (Auto/Manual)
--** Assign Manual CCT
--** Extend Occupancy Timeout setting
--** Change Scenes Recalled by Occupied/Vacant/On/Off
--** Shade Command (Open/Close)
--** Plug Load Mode (Off/On/Auto)
--* Copy Actions from Area to Area
--* AM, PM, and Relative to Astronomical (Sunrise/Sunset) Time References
--* Event Verification by Date in real-time with month calendar view and event description
--* Require a scene to be active before recalling the scheduled scene (optional)
--* Advanced Scheduling Feature (Licensed)
--** Event Include and/or Exclude by Calendar(s) and/or Calendar Group(s)
--** Calendar Groups consist of one or more Calendars
--** Calendars can be based on a Date Range or Date Pattern
--** Calendar Properties:
--*** Date Range:
--**** Start and End Dates
--**** Specific Dates selected using Date Picker
--**** Recur Annually Option
--*** Date Pattern:
--**** Year - Restrict to specific year or none
--**** Month - Restrict to specific Month(s) or none
--**** Week - Restrict to specific Week of the month or none
--**** Week Day - Restrict to specific day of the week or none
--**** Day - Restrict to a specific day of the month or none
--**** Optional: Offset - Offset date based on restrictions
--**** Optional: Calculate Observed Weekday Date Before, After, or BeforeOrAfter
--*** Enable/Disable
--** Pre-loaded with US Federal and common non-Federal US Holidays
--
--==== Circadian Rhythm/Dynamic White ====
--
--* Global system CCT Level
--* Override CCT per area by scene or manually
--* Crestron GLS-LCCT (SolarSync™) sensor integration for daylight tracking
--* Time period based
--** Time References for start and end of period
--*** AM/PM
--*** Relative to
--**** Sunrise
--**** Sunset
--**** Solar Noon
--** Each time period can have the following setting for CCT
--*** Static
--*** Linear change over time
--*** Sensor with configured CCT when sensor is out of range
--* Supported with 0-10V, DMX, and DALI
--
--==== Supported Hardware Features ====
--
--Virtually the entire Crestron lighting product line is supported along with several 3rd party products
--
--* Common Settings to all devices
--** Contractor Label
--** Name
--** GlobalId
--** UniqueId (GUID)
--* HVAC
--** Temperature control by area
--** Support for some Crestron Thermostats, more can be added as needed
--** Support for some 3rd party systems, more can be added as needed
++** Crestron GLS-LCCT sensor integration for daylight tracking
++* Sophisticated Scheduling Engine
++** Configurable Actions by Area
++*** Scene
++**** Override Scene Fade Time
++*** Change Keypad State (Enable/Disable/Disable Off)
++*** Change Occupancy Mode (Occupancy/Vacancy/Disable/Last)
++*** Switch between Normal and After Hours (for Timeout)
++*** Change CCT Mode (Auto/Manual)
++*** Assign Manual CCT
++*** Extend Occupancy Timeout
++*** Change Scenes Recalled by Occupied/Vacant/On/Off
++*** Shade Command (Open/Close)
++*** Plug Load Mode (Off/On/Auto)
++** Copy Actions from Area to Area
++** AM, PM, and Astronomical (Sunrise/Sunset) Time References
++** Event Verification by Date in real-time with month calendar view and event description
++** Advanced Scheduling Feature (Licensed)
++*** Event Include and/or Exclude by Calendar(s) and/or Calendar Group(s)
++*** Calendar Groups consist of one or more Calendars
++*** Calendars can be based on a Date Range or Date Pattern
++*** Calendar Properties:
++**** Date Range:
++***** Start and End Dates or Specific Dates selected using Date Picker
++***** Does this Recur Annually
++**** Date Pattern:
++***** Year - Restrict to specific year or none
++***** Month - Restrict to specific Month(s) or none
++***** Week - Restrict to specific Week of the month or none
++***** Week Day - Restrict to specific day of the week or none
++***** Day - Restrict to a specific day of the month or none
++***** Optional: Offset - Offset date based on restrictions
++***** Optional: Calculate Observed Weekday Date Before, After, or BeforeOrAfter
++**** Enable/Disable
++*** Pre-loaded with US Federal and common non-Federal US Holidays
  * Keypads
--** Support for common fixed configurations, user assignable at runtime
--** Custom keypads with configurable actions per button at runtime
--*** Graphic based programming using showrunner™ HUB UI
--*** Master raise/lower button support allows assignment of currently selected load/shade/area/etc
--*** Custom button layouts w/ labels to assist with generating engravings
--** Flexible Templating Engine
--*** Create common keypad templates
--*** Apply keypad templates to individual keypads
--**** Remap hardware when template is applied
--**** Optionally exclude specific hardware and/or buttons
++** Support for common fixed configurations, user assignable
++** Custom keypads with configurable actions per button
  ** User configurable area to control
--** Enable/Disable/Disable Off states
--** Prevent disable option
--** Flip raise/lower on common keypad types
--** Configurable hold time support, done in software if not supported by hardware
--** Configurable double tap time support if supported by hardware
--** Simulate keypads from showrunner™ HUB UI or console
--** Direct load mapping for some common keypads
--* Keyswitch/Contact Closure Inputs
--** Supports all versiport and digital inputs
--** Maintained and Momentary supported
--** Feedback output supported
--** Functions
--*** Override
--*** Scene Recall for Active and Inactive States
--*** Demand Response
--*** Actions for Active and Inactive States
  * Occupancy Sensors:
--** Occupancy configuration for CN and ZUMLINK occupancy sensors
++** Occupancy configuration for CN type occupancy sensors
  ** 3rd Party and Non-System occupancy sensor support
--** Occupancy/Vacancy/Disabled/Use Hardware Logic modes, user configurable
++** Occupancy/Vacancy/Disabled modes, user configurable
  ** Configure scenes recalled by area for occupancy and vacancy states
  ** Individual max unoccupied level by load for IECC 2018 C405.2.1.3 compliance
  ** User configurable assignment of sensor to area(s) and load(s)
  ** Occupancy sensors may feed data to multiple areas and loads
--** Last occupied and vacant times recorded
--* Output Signal
--** Logic object capable of triggering additional logic
--** Can trigger physical outputs via versiports/IOs
--** Supports conditional logic
--** Independent actions for active/inactive states
--** Configurable delays for active/inactive execution
  * Partition sensors
  ** Support for divisible areas
  ** GLS-PART-CN with adjustable sensitivity
--** 3rd party sensor support via hardware inputs
--** User configurable Auto, Combined, and Divided
--** Filtering to ignore noisy partition sensors
--** Change count and last change recorded
--* Photocell
--** Supports Open Loop, Closed Loop, Exterior, and LCCT (as SolarSync™ and exterior)
--** Configurable coefficient
--** Configurable thresholds
--** Assignable to individual loads for daylight harvesting
--* Serial Interface
--** RS-232/422/484
--** Configurable Baud Rate and Com settings
--** Simple ASCII API for controlling/montioring
--** Areas/Loads/Occupancy/Partition/Shades supported
--* Shades
--** Support for Crestron shades/drapes
--** Support for many 3rd party shade and drape systems
--
--==== Energy Efficiency ====
--
++** 3rd party sensor support via versiport input
++** User configurable Auto, Combined, and Divided modes to override occ sensor, activated by UI or keypad
++* Maintained and Momentary Keyswitch/FACP/Override Input for scene recall or override activation
  * Demand Response/Load Shedding
  ** Automatic via sensor input
--** Manually via user input
--* Calculated or Measured Power (Watts)
--* Energy Efficiency visualization on floorplan
--
--==== Security ====
--
--* Touchscreens: Global User and Technician Passcodes, user configurable.
--* showrunner™ HUB
--** Role Based permissions by Group
--** Granular Create, Edit, View, Delete, and Execute permissions by Role
--** Users and API Users assignable to groups
--** Restrict Group by area and tag
--** HTTPS enforced
--** Auto session timeout
--** Login via username/password or PIN code
--** Support for Processor or internal user database
--** Best practices for password handling
--* API using AWSv4 scheme for authentication per request for maximum security
--
--==== System Features ====
--
++** Manually via keypad
++* Configurable maximum demand response level by load
++* Dynamic addition/deletion/assignment/configuration of loads
++* Dynamic addition/deletion of areas
++* User editable labeling of areas, loads, keypads, occupancy sensors, and schedules
++* Daylight Harvesting sensor to load assignment and settings adjustment
++* Global User and Technician Passcodes, user configurable.
  * User configurable time zone, location, and current time
++* Addressing/Grouping/Driver Replacement for DALI.  DALI groups are referenced by their controlled load simplifying addressing and replacement procedures.
  * Addressing and Verification of Cresnet devices by serial number
  * Cresnet Device Serial Number capture
  * Configurable Global Actions with touchpanel trigger
--* Extensive console command interface (CLI)
--
--(% class="wikigeneratedid" %)
--==== Extensibility ====
--
--* Actions
--** Logic objects exist on showrunner™ objects
--** Functionality can be triggered via APIs
--** Used for defining the behaviors of global actions, custom keypads, and numerous other logic operations within showrunner™
--* Extensions
--** Extension model allows customization and additional functionality to be added to the showrunner™ ecosystem
--** [[Supported functions>>doc:SHOWRUNNER™ Integrations Guide.Integration Options.Extensions.WebHome]]
--* Global Actions
--** Allow minimal or input triggered operations against the system
--** Can be custom programmed at runtime
--
--==== User Interfaces ====
--
--* showrunner™ HUB
--** Web based
--** Runs directly on the processor or VC-4 instance
--** HTTPS required
--** Can be run in kiosk mode on a touchscreen PC for the full touchscreen experience
--** Node Tree
--*** Organize areas in logical locations based on physical topology
--*** Searchable, only shows matching areas
--** Floorplans
--*** Assigned to a node, multiple floor plans are supported
--*** Pinch zoom/touch pan
--*** User provided floorplan
--*** Draw directly on floorplan for areas and objects
--**** Areas
--**** Loads
--**** Partitions
--**** Occupancy Sensors
--**** Keypads
--**** Photocells
--*** Crestron product line icons area available to match the installed sensor
--*** Interactive control screens depending on clicked object
--*** Multiple different views help visualize data
--**** Area View - Shows areas with user selected colors
--**** Tags View - Shows areas based on their assigned tag
--**** Occupancy View - Shows areas based on their current occupancy status and how recently that status changed
--**** Intensity View - Shows areas shaded based on the current overall light intensity
--**** Energy View - Shows areas shaded based on the areas current energy efficiency from efficient to inefficient
--*** Automatic navigation to area when selected from the node tree
--*** Fullscreen view
--** Schedule
--*** See [[Scheduling Features>>doc:||anchor="Scheduling Features"]] for more info
--** Reports
--*** Interactive data
--**** Area Loads
--**** Area Scenes
--**** Areas
--**** Cresnet (Query)
--**** Device Status
--**** Events
--**** Keypads
--** Setup
--*** Device Diagnostic - Show Diagnostic data from supported devices
--*** Hardware Management - Tree view of Ethernet, Cresnet, and RF topologies
--*** File Management - Manage config, license, currently active config, and backup/restore operations
--*** Global Actions - Add/Delete/Configure
--*** Integrations - Manage integrations with other showrunner™ systems
--*** Keypad Configuration - Configure keypads
--*** Maps - Add floorplan images
--*** Network - DHCP Server (for processors without routers only)
--*** System Settings - Manage various system settings
--*** Tags - Manage tags and association of tags with areas
--*** User Management - Manage users/groups/API users
--* Crestron TS/TSWs and Crestron App (iPad/iPhone/Android)
--
--=== Integrations ===
--
--* AV Integration protocol via serial port
--* BACNnet Support for integration of Areas, Loads (Licensed Feature, both showrunner and Crestron)
--** Global
--*** Override
--*** Demand Response
--*** Device Offline Count
--*** Alarm
--*** System Normal/After Hours
--** Area Specific
--*** showrunner™ Mode
--**** Occupancy Status
--**** Occupancy Enable
--**** Scenes
--**** Loads
--**** Photocell Level
--**** Overall Intensity
--**** Power (watts)
--*** Zum Hub Emulation Mode
--**** Online
--**** On
--**** Scenes
--**** Occupied
--**** Occupancy Sensor Enable
--* Crestron Fusion (Licensed Feature)
--** Scenes, Recall and Save
--** Load Control
--** Occupancy Status
--** Photocell
--* E-DMX Receiver
--** SACN and/or Art-Net
--** Enable/Disable control for loads using e-DMX channel value
--** Map DMX to showrunner loads
--* EISC Export for AV Integration, dynamic creation from the UI (3-series, classic, EISC Client, EISC Server, VC-4 Client)
--** Configurable IP address and IP-ID, change at runtime
--** Configurable rooms to export, change at runtime
--** Changes generate new RSD file at runtime that may be provided to the AV programmer
--* HTTP REST API w/ Authorization
--* Lightweight API provides real-time control/feedback of hardware using CoAP
--* TCP Interface using simple ASCII commands, subscriptions supported
--* UDP Receiver using simple ASCII commands
--* Zum Floor Hub Support for integration, Export showrunner™ areas to the Floor Hub (Licensed Feature)
++* User configurable Crestron EISC Integration with ability to change IP Address and IP-ID of remote Crestron system as well as Areas shared on the fly.  RSD file is automatically generated and link is provided for downloading of RSD file.
  * Remote hardware support from neighbor ShowRunner System:
--** Allows a central ShowRunner system to integrate edge processors
++** Allows a master ShowRunner system to integrate slave processors
  ** AV Serial Interface
  ** Loads
  ** Controllers
@@ -384,7 +384,17 @@
  ** Occupancy Sensor (including setup for Cresnet sensors)
  ** Partition Sensors (including setup for Cresnet sensors)
  ** Photocells
++* Web based reporting directly from the processor allows generation of as built documentation: Cresnet Discovery, Device Status, Event Schedule, Keypad Schedule, Load Schedule, and Panel Schedule
++=== Integrations ===
++
++* AV Integration protocol via serial port
++* BACNET Support for integration of Areas, Loads (Licensed Feature)
++* Crestron Fusion (Licensed Feature)
++* E-DMX Receive - Receive DMX (SACN or Art-Net) and translate to ShowRunner Loads
++* EISC Export for AV Integration, dynamic creation from the UI (3-series or classic)
++* Zum Floor Hub Support for integration, Export SHOWRUNNER™ areas to the Floor Hub (Licensed Feature)
++
  === Reporting ===
  ShowRunner provides a website via the processor's internal webserver with the following reports.  All data is live at the time of the generation of the report.