Wiki source code of Floorplans - Upload and Configure on showrunnerHUB™

Version 9.1 by Scott Kohlmann on 2021/12/02 21:37

version	line-number	content
8.1	1	Upload Map - Youtube Tutorial - [[https:~~/~~/www.youtube.com/watch?v=fpfHGXPhD6I>>https://www.youtube.com/watch?v=fpfHGXPhD6I]]
2.1	2
	3	1. Login to showrunnerHUB™
	4	1. Click on the setup gear in the upper right corner
	5	1. Click on the Maps tab
	6	1. Click Add Map
6.1	7	1. Fill in form(((
	8	(% style="text-align:center" %)
7.1	9	[[image:Floorplan Upload Screen.png\|\|height="474" width="194"]]
6.1	10
	11	1. Bound X -Image Resolution or start with 1000
	12	1. Bound Y – Image resolution or start with 1000
	13	1. Initial Zoom – Start with 1
	14	1. Min Zoom – Start with -2
	15	1. Max Zoom – Start with 10
	16	)))
2.1	17	1. Upload Image using Map File Upload Button
4.1	18	11. If you are running showrunner™ 3.10 and below follow these steps:
	19	11*. If file image is over 1mb, click “Save new map.” It will appear as though the map uploads, but it won’t due to Crestron limitation.
	20	11*1. Manually transfer the file to NVRAM -> sr-graphics
	21	11*1. Refresh the page
2.1	22	1. Associate Map
	23	11. Select root node
	24	11. Click Hamburger menu and Associate Map
3.1	25	11. Choose map from list that was uploaded earlier
2.1	26	11. Refresh and map will appear
	27
	28	Configure Floorplans
	29
	30	1. Add Areas
	31	11. Click on Add Area Tool
	32	11. Draw points around area you are creating
	33	11. Once area is completed, chose area to associate to the object in drop down
	34	11. Area is created
	35	1. Change Color of Areas
	36	11. Click on any area
	37	11. Select from available colors or use hex color
	38	11. Click save
	39	1. Click Gear to Exit Editor