Wiki source code of Floorplans - Upload and Configure on showrunnerHUB™

Version 26.2 by Scott Kohlmann on 2021/12/27 17:10

version	line-number	content
24.1	1	=== Upload Map - Youtube Tutorial - [[Add and Associate Map>>https://youtu.be/5qBHFfbSMp0]] ===
2.1	2
15.1	3
2.1	4	1. Login to showrunnerHUB™
	5	1. Click on the setup gear in the upper right corner
	6	1. Click on the Maps tab
	7	1. Click Add Map
6.1	8	1. Fill in form(((
15.1	9
6.1	10
22.1	11	[[image:Screen Shot 2021-12-10 at 1.52.42 PM.png\|\|height="362" width="150"]]
15.1	12
	13
6.1	14	1. Bound X -Image Resolution or start with 1000
	15	1. Bound Y – Image resolution or start with 1000
	16	1. Initial Zoom – Start with 1
	17	1. Min Zoom – Start with -2
	18	1. Max Zoom – Start with 10
	19	)))
2.1	20	1. Upload Image using Map File Upload Button
4.1	21	11. If you are running showrunner™ 3.10 and below follow these steps:
	22	11*. If file image is over 1mb, click “Save new map.” It will appear as though the map uploads, but it won’t due to Crestron limitation.
	23	11*1. Manually transfer the file to NVRAM -> sr-graphics
	24	11*1. Refresh the page
2.1	25	1. Associate Map
	26	11. Select root node
	27	11. Click Hamburger menu and Associate Map
3.1	28	11. Choose map from list that was uploaded earlier
2.1	29	11. Refresh and map will appear
	30
25.1	31	=== Draw and Configure - Youtube Tutorial - [[Draw and Configure>>https://youtu.be/VreqGeElitU]] ===
15.1	32
	33
2.1	34	1. Add Areas
10.1	35	11. Click on Settings gear icon
2.1	36	11. Click on Add Area Tool
	37	11. Draw points around area you are creating
	38	11. Once area is completed, chose area to associate to the object in drop down
	39	11. Area is created
	40	1. Change Color of Areas
	41	11. Click on any area
	42	11. Select from available colors or use hex color
	43	11. Click save
	44	1. Click Gear to Exit Editor