Wiki source code of Floorplans - Upload and Configure on showrunnerHUB™

Version 18.1 by Scott Kohlmann on 2021/12/10 22:02

version	line-number	content
15.1	1	=== Upload Map - Youtube Tutorial - [[Add and Associate Map>>https://www.youtube.com/watch?v=9gANDtgbuo4]] ===
2.1	2
15.1	3
2.1	4	1. Login to showrunnerHUB™
	5	1. Click on the setup gear in the upper right corner
	6	1. Click on the Maps tab
	7	1. Click Add Map
6.1	8	1. Fill in form(((
15.1	9
6.1	10
18.1	11	(% style="text-align:center" %)
	12	[[image:Screen Shot 2021-12-10 at 1.52.42 PM.png\|\|height="362" width="150"]]
15.1	13
	14
	15
	16
	17
	18
	19
	20
	21
	22
	23
	24
16.1	25
	26
	27
18.1	28
15.1	29
17.1	30
6.1	31	1. Bound X -Image Resolution or start with 1000
	32	1. Bound Y – Image resolution or start with 1000
	33	1. Initial Zoom – Start with 1
	34	1. Min Zoom – Start with -2
	35	1. Max Zoom – Start with 10
	36	)))
2.1	37	1. Upload Image using Map File Upload Button
4.1	38	11. If you are running showrunner™ 3.10 and below follow these steps:
	39	11*. If file image is over 1mb, click “Save new map.” It will appear as though the map uploads, but it won’t due to Crestron limitation.
	40	11*1. Manually transfer the file to NVRAM -> sr-graphics
	41	11*1. Refresh the page
2.1	42	1. Associate Map
	43	11. Select root node
	44	11. Click Hamburger menu and Associate Map
3.1	45	11. Choose map from list that was uploaded earlier
2.1	46	11. Refresh and map will appear
	47
15.1	48	=== Draw and Configure - Youtube Tutorial - [[Draw and Configure>>https://www.youtube.com/watch?v=C-er0FgGoWU]] ===
	49
	50
2.1	51	1. Add Areas
10.1	52	11. Click on Settings gear icon
2.1	53	11. Click on Add Area Tool
	54	11. Draw points around area you are creating
	55	11. Once area is completed, chose area to associate to the object in drop down
	56	11. Area is created
	57	1. Change Color of Areas
	58	11. Click on any area
	59	11. Select from available colors or use hex color
	60	11. Click save
	61	1. Click Gear to Exit Editor