Wiki source code of Floorplans - Upload and Configure on showrunnerHUB™

Version 17.1 by Scott Kohlmann on 2021/12/10 22:01

version	line-number	content
15.1	1	=== Upload Map - Youtube Tutorial - [[Add and Associate Map>>https://www.youtube.com/watch?v=9gANDtgbuo4]] ===
2.1	2
15.1	3
2.1	4	1. Login to showrunnerHUB™
	5	1. Click on the setup gear in the upper right corner
	6	1. Click on the Maps tab
	7	1. Click Add Map
6.1	8	1. Fill in form(((
15.1	9
6.1	10
15.1	11	[[image:Screen Shot 2021-12-10 at 1.52.42 PM.png\|\|height="362" style="float:left" width="150"]]
	12
	13
	14
	15
	16
	17
	18
	19
	20
	21
	22
	23
16.1	24
	25
	26
15.1	27
	28
17.1	29
	30
	31
	32
	33
6.1	34	1. Bound X -Image Resolution or start with 1000
	35	1. Bound Y – Image resolution or start with 1000
	36	1. Initial Zoom – Start with 1
	37	1. Min Zoom – Start with -2
	38	1. Max Zoom – Start with 10
	39	)))
2.1	40	1. Upload Image using Map File Upload Button
4.1	41	11. If you are running showrunner™ 3.10 and below follow these steps:
	42	11*. If file image is over 1mb, click “Save new map.” It will appear as though the map uploads, but it won’t due to Crestron limitation.
	43	11*1. Manually transfer the file to NVRAM -> sr-graphics
	44	11*1. Refresh the page
2.1	45	1. Associate Map
	46	11. Select root node
	47	11. Click Hamburger menu and Associate Map
3.1	48	11. Choose map from list that was uploaded earlier
2.1	49	11. Refresh and map will appear
	50
15.1	51	=== Draw and Configure - Youtube Tutorial - [[Draw and Configure>>https://www.youtube.com/watch?v=C-er0FgGoWU]] ===
	52
	53
2.1	54	1. Add Areas
10.1	55	11. Click on Settings gear icon
2.1	56	11. Click on Add Area Tool
	57	11. Draw points around area you are creating
	58	11. Once area is completed, chose area to associate to the object in drop down
	59	11. Area is created
	60	1. Change Color of Areas
	61	11. Click on any area
	62	11. Select from available colors or use hex color
	63	11. Click save
	64	1. Click Gear to Exit Editor