Skip to Content

Wiki source code of ZUMNET-JBOX Load Controllers

Version 31.1 by Alexander Mott on 2021/12/30 00:17
Show last authors
1 {{box title="**Contents**"}}
2 {{toc/}}
3 {{/box}}
4
5 (% class="row" %)
6 (((
7 (% class="col-xs-12 col-sm-8" %)
8 (((
9 = Zūm Net JBOX Devices =
10
11 ZUMNET-JBOX devices are distributed lighting controllers that comprise the networked portion of a Zūm Wired system. Typically, each room will have just one ZUMNET-JBOX device that connects to the [[Zūm Net>>xwiki:Wiring Guide.Wiring Overview.Zūm Net.WebHome||anchor="HZ16BmNet"]] lighting network and may optionally host one or more [[Zūm Link>>xwiki:Wiring Guide.Wiring Overview.Zūm Net.WebHome||anchor="HZ16BmLink"]] devices.
12
13 All ZUMNET-JBOXs have two purple ZUMNET (LAN) ports and two orange ZUMLINK (ROOM) ports:
14
15 * One ZUMNET (LAN) port should come from the previous Zūm Net device or a Hub panel
16 * One ZUMNET (LAN) port should go to the next Zūm Net device or remain unused
17 * One ZUMLINK (ROOM) port should go to the first Zūm Link device on the first Zūm Link run
18 * One ZUMLINK (ROOM) port should go to the first Zūm Link device on the second Zūm Link run
19
20 It is important to note that while there are two ZUMLINK ports, Zūm Link runs should never be looped back to a ZUMNET-JBOX. Zūm Link runs should originate at a ZUMNET-JBOX, connect to a number of Zūm Link devices, and then stop at the last Zūm Link device. The reason for having multiple ZUMLINK ports is ease of installation; for example, if there are two ZUMLINK-KP keypads in a room, it might be easier to put them at the end of two separate runs so that only one RJ-45 terminated Zūm Link cable needs to be pulled through conduit.
21
22 In //[[Figure 1>>xwiki:Wiring Guide.Zūm Wired System Overview.Load Controllers (ZUMNET-JBOX).WebHome||anchor="HFigure1"]]//, ZUMLINK ports are shown in orange, ZUMNET ports are shown in purple, and the sensor input block is between them.
23
24 == ZUMNET-JBOX-16A-LV Wiring ==
25
26 The ZUMNET-JBOX-16A-LV attaches to a standard 4" or 4-11/16" junction box through a 1/2" knockout. High voltage AC and 0-10V dimming splices are made inside of the junction box, while low-voltage Zūm Net, Zūm Link, and non-system sensor connections are made outside of the junction box.
27 //[[Figure 2>>xwiki:Wiring Guide.Zūm Wired System Overview.Load Controllers (ZUMNET-JBOX).WebHome||anchor="HFigure2"]]//
28
29 The official quick start guide from Crestron is available [[here>>attach:mg_qs_zumnet-jbox.pdf]].
30
31 == ZUMNET-JBOX-DALI Wiring ==
32
33 L
34 //[[Figure 3>>xwiki:Wiring Guide.Zūm Wired System Overview.Load Controllers (ZUMNET-JBOX).WebHome||anchor="HFigure3"]]//
35
36 The official quick start guide from Crestron is available [[here>>attach:mg_qs_zumnet-jbox.pdf]].
37
38 == Sensor Input Wiring Detail ==
39
40 Non-system sensors (including Crestron GLS-ODT-C-NS sensors, GLA-LDL photocells, and Steinel occupancy sensors) may be landed at the sensor input terminal block of ZUMNET-JBOX devices. Details on the sensor input wiring can be found [[here>>doc:Wiring Guide.Zūm Wired System Overview.Sensor Input Detail (ZUMNET- and ZUMLINK-JBOX).WebHome]].
41 )))
42
43
44 (% class="col-xs-12 col-sm-4" %)
45 (((
46 (% class="wikigeneratedid" id="HFigure1" %)
47 (((
48 [[[[image:wiki_znet over trans.png]]>>attach:wiki_znet over trans.png]]
49 //Figure 1: ZUMNET-JBOX Overview [[(larger)>>https://wiki.chiefintegrations.com/download/Wiring%20Guide/Z%C5%ABm%20Wired%20System%20Overview/Load%20Controllers%20%28ZUMNET-JBOX%29/WebHome/wiki_znet%20over%20trans.png?rev=1.1]]//
50 )))
51
52 (% class="wikigeneratedid" id="HFigure2" %)
53 (((
54 [[[[image:wiki_znetlv trans.png]]>>attach:wiki_znetlv trans.png]]
55 //Figure 2: ZUMNET-JBOX-16A-LV Wiring [[(larger)>>https://wiki.chiefintegrations.com/download/Wiring%20Guide/Z%C5%ABm%20Wired%20System%20Overview/Load%20Controllers%20%28ZUMNET-JBOX%29/WebHome/wiki_znetlv%20trans.png?rev=1.1]]//
56 )))
57
58 (% class="wikigeneratedid" id="HFigure3" %)
59 (((
60 [[[[image:wiki_znetdali trans.png]]>>attach:wiki_znetdali trans.png]]
61 //Figure 3: ZUMNET-JBOX-DALI Wiring [[(larger)>>https://wiki.chiefintegrations.com/download/Wiring%20Guide/Z%C5%ABm%20Wired%20System%20Overview/Load%20Controllers%20%28ZUMNET-JBOX%29/WebHome/wiki_znetdali%20trans.png?rev=1.1]]//
62 )))
63 )))
64 )))