Wiki source code of Zum Wired
Last modified by Craig Lewis on 2024/07/15 20:18
Hide last authors
| author | version | line-number | content |
|---|---|---|---|
 |
2.1 | 1 | Toolbox Text Console commands for setting up Zum Wired Systems: |
| |
1.1 | 2 | |
| 3 | |||
| 4 | |||
| |
5.1 | 5 | |(% style="width:350px" %)**Command**|(% style="width:1139px" %)**Description** |
| 6 | |(% style="width:350px" %)##autodiscovery query##|(% style="width:1139px" %)Will generate a list of all network devices (Must be connected to one of your processors) | ||
| |
10.1 | 7 | |(% style="width:350px" %)##who##|(% style="width:1139px" %)Will generate a list of all online network devices (Must be connected to one of your processors) |
| 8 | |(% style="width:350px" %)**ZUMNET-JBOX**|(% style="width:1139px" %) | ||
| |
13.1 | 9 | |(% style="width:350px" %)##zwmode##|(% style="width:1139px" %)Will tell if your ZUMNET-JBOX is setup for Zum or Cresnet (Newer firmware will also display mode and autoswitch enable/disable) |
| |
12.1 | 10 | |(% style="width:350px" %)##zwmode zum## (or ##cnet##)|(% style="width:1139px" %)((( |
| 11 | Will set your Zum Op mode for your ZUMNET-JBOX | ||
| 12 | ))) | ||
| |
10.1 | 13 | |(% style="width:350px" %)##zwms##|(% style="width:1139px" %)Tell which mode the ZUMNET-JBOX is in |
| 14 | |(% style="width:350px" %)##zwms master## (or ##slave##)|(% style="width:1139px" %)Will set mode for ZUMNET-JBOX (old firmware) | ||
| 15 | |(% style="width:350px" %)##zwps primary## (or ##secondary##)|(% style="width:1139px" %)Will set mode for ZUMNET-JBOX (newer firmware) | ||
| |
16.1 | 16 | |(% style="width:350px" %)##autoswitch on## (or off)|(% style="width:1139px" %)Will enable/disable Autoswitch mode for ZUMNET-JBOX |
| |
11.1 | 17 | |(% style="width:350px" %)**ZUMLINK-OCC-VAC-SENSORS**|(% style="width:1139px" %) |
| |
7.4 | 18 | |(% style="width:350px" %)##rcon 1.##[//CID//] ##detlev## [0-15]|(% style="width:1139px" %)Will set Detection Level 0-15 (Sensitivity in the App) |
| 19 | |(% style="width:350px" %)##rcon 1.##[//CID//] ##detrang## [0-255]|(% style="width:1139px" %)Will set Detection Range 0-255 | ||
| |
17.2 | 20 | |(% style="width:350px" %)##rcon 1.##[//CID//] ##setir off## (or on)|(% style="width:1139px" %)Will disable/enable IR on ZUMLINK-Occupancy Sensor with IR technology |
| 21 | |(% style="width:350px" %)##rcon 1.##[//CID//] ##setus off## (or on)|(% style="width:1139px" %)Will disable/enable US on ZUMLINK-Occupancy Sensor with US technology | ||
| |
8.2 | 22 | |(% style="width:350px" %)##rcon 1.##[//CID//] ##setto ##[5-1800]|(% style="width:1139px" %)Will set timeout in seconds for the ZUMLINK-Occupancy Sensor |
| |
2.1 | 23 | |
| |
1.1 | 24 |