Skip to Content

Wiki source code of Zum Wired

Version 7.6 by Craig Lewis on 2024/05/22 14:45
Show last authors
1 Toolbox Text Console commands for setting up Zum Wired Systems:
2
3
4
5 |(% style="width:350px" %)**Command**|(% style="width:1139px" %)**Description**
6 |(% style="width:350px" %)##autodiscovery query##|(% style="width:1139px" %)Will generate a list of all network devices (Must be connected to one of your processors)
7 |(% style="width:350px" %)##rcon 1.##[//CID//] ##detlev## [0-15]|(% style="width:1139px" %)Will set Detection Level 0-15 (Sensitivity in the App)
8 |(% style="width:350px" %)##rcon 1.##[//CID//] ##detrang## [0-255]|(% style="width:1139px" %)Will set Detection Range 0-255
9 |(% style="width:350px" %)##rcon 1.##[//CID//] ##setir disable## (or enable)|(% style="width:1139px" %)Will disable/enable IR on ZUMLINK-Occupancy Sensor with IR technology
10 |(% style="width:350px" %)##rcon 1.##[//CID//] ##setus disable## (or enable)|(% style="width:1139px" %)Will disable/enable US on ZUMLINK-Occupancy Sensor with US technology
11 |(% style="width:350px" %)##rcon 1.##[//CID//] ##setto ##[timeout]|(% style="width:1139px" %)Will set timeout in seconds for the ZUMLINK-Occupancy Sensor
12 |(% style="width:350px" %)##who##|(% style="width:1139px" %)Will generate a list of all online network devices (Must be connected to one of your processors)
13 |(% style="width:350px" %)##zwms##|(% style="width:1139px" %)Tell which mode the ZUMNET-JBOX is in
14 |(% style="width:350px" %)##zwms master## (or ##slave##)|(% style="width:1139px" %)Will set mode for ZUMNET-JBOX (old firmware)
15 |(% style="width:350px" %)##zwps primary## (or ##secondary##)|(% style="width:1139px" %)Will set mode for ZUMNET-JBOX (newer firmware)
16 |(% style="width:350px" %)##zwmode##|(% style="width:1139px" %)Will tell if your ZUMNET-JBOX is setup for Zum or Cresnet
17 |(% style="width:350px" %)##zwmode zum## (or ##cnet##)|(% style="width:1139px" %)Will set your Zum Op mode for your ZUMNET-JBOX
18
19