Wiki source code of GLPAC (Cresnet)

Version 11.4 by Craig Lewis on 2022/08/18 16:55

version	line-number	content
11.2	1	Older systems with GLPACs wired back to the processor via Cresnet can be added by created a program for slot 2.
7.1	2
	3
11.2	4	* Create a SIMPL windows program
	5	* Add the GLPAC-DIMFLV8 (Cresnet) to the appropriate Cresnet IDs
	6	* Define the Level In and Level Out analog signals on each of the GLPAC Remote Standard Intersystem Communications
7.1	7
11.2	8	[[image:1660773651340-476.png]]
7.1	9
11.3	10	* Add a 3 Series TCP/IP Ethernet Intersystem Communications to the appropriate Ethernet ID
	11	* In Device Settings, set the Default IP Address to 127.0.0.2 (Loop back address)
7.1	12
11.3	13	[[image:image-20220817145415-2.png]]
	14
	15	* Copy the GLPACs Level In and Level Out signals and paste them to the 3 Series TCP/IP Ethernet Intersystem Communications Analog signals
	16
11.1	17	[[image:1660773665229-324.png]]
7.1	18
11.4	19	* In the showrunner config, the lighting controller will be defined with the following settings
	20	** Controller Type = "3SeriesEisc"
	21	** ID and Device Connection Id = IP ID used
	22	** Properties Value = "127.0.0.2"
	23	** Loads Index for each load = the analog joins defined in the SIMPL program EISC Analog Symbols
7.1	24
11.2	25
7.1	26	[[image:image-20220817145415-4.png]]