Skip to Content
Last modified by Alexander Mott on 2024/03/19 21:51
From version 2.1
edited by Alexander Mott
on 2020/06/08 19:01
Change comment: There is no comment for this version
To version 3.2
edited by Craig Lewis
on 2020/06/09 15:24
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.alexander\.mott@chiefintegrations\.com
1 +XWiki.craig\.lewis@chiefintegrations\.com
Content
... ... @@ -5,7 +5,7 @@
5 5  == Steps ==
6 6  
7 7  1. Download and install the Crestron Information Gathering Tool
8 -1*. The tool is available to download from the Resources tab on the [[S>>url:https://www.crestron.com/Products/Control-Hardware-Software/Software/Development-Software/SW-INFOTOOL]][[W-INFOTOOL Product Page>>url:https://www.crestron.com/Products/Control-Hardware-Software/Software/Development-Software/SW-INFOTOOL]]
8 +1*. The tool is available to download from the Resources tab on the [[SW-INFOTOOL Product Page>>url:https://www.crestron.com/Products/Control-Hardware-Software/Software/Development-Software/SW-INFOTOOL]]
9 9  1*. Alternatively, the tool can be downloaded and installed through the Crestron MasterInstaller by running the MasterInstaller and selecting the "Information Gathering Tool" option.
10 10  1. Connect to the lighting network via Ethernet cable. 
11 11  1*. Ensure that the connecting computer's Ethernet settings are set to Static and the IPv4 address does not conflict with any devices already on the network.
... ... @@ -21,7 +21,7 @@
21 21  11. Press the Start button. It may take a couple of minutes for all the commands to finish running
22 22  1. If gathering information for multiple devices:
23 23  11. Press the "Autodiscover" button to discover all networked devices.
24 -11. At the bottom of the window, press the "Batch Devices" button
24 +11. At the bottom of the window, press the "Batch Devices" button or select "Batch Mode" on the top tool bar
25 25  11. Press the "Model Name" column heading to sort by device model
26 26  11. Check the box in the "Enable" column to select which devices to gather information on
27 27  11. Once all desired devices are selected, press "Start Selected" in the lower right to begin collecting information on those devices.