Skip to Content
Last modified by Alexander Mott on 2024/03/19 21:51
From version 2.1
edited by Alexander Mott
on 2020/06/08 19:01
Change comment: There is no comment for this version
To version 3.1
edited by Alexander Mott
on 2020/06/08 19:45
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -5,7 +5,7 @@
5 5  == Steps ==
6 6  
7 7  1. Download and install the Crestron Information Gathering Tool
8 -1*. The tool is available to download from the Resources tab on the [[S>>url:https://www.crestron.com/Products/Control-Hardware-Software/Software/Development-Software/SW-INFOTOOL]][[W-INFOTOOL Product Page>>url:https://www.crestron.com/Products/Control-Hardware-Software/Software/Development-Software/SW-INFOTOOL]]
8 +1*. The tool is available to download from the Resources tab on the [[SW-INFOTOOL Product Page>>url:https://www.crestron.com/Products/Control-Hardware-Software/Software/Development-Software/SW-INFOTOOL]]
9 9  1*. Alternatively, the tool can be downloaded and installed through the Crestron MasterInstaller by running the MasterInstaller and selecting the "Information Gathering Tool" option.
10 10  1. Connect to the lighting network via Ethernet cable. 
11 11  1*. Ensure that the connecting computer's Ethernet settings are set to Static and the IPv4 address does not conflict with any devices already on the network.