Wiki source code of Crestron Command Line

Version 9.3 by Craig Lewis on 2022/09/19 18:28

author	version	line-number	content
		1	__Frequently used commands:__
		2
		3	BROADcast Operator Enable Error Broadcast
		4
		5	ERR SYS Operator Prints the error log
		6
		7	SHOWLICENSE Operator Display list of licensed application(s)
		8
		9	SHOWLICENSEEX Operator Display list of licensed application(s)
		10
		11	SYSTEMKEY Administrator Display system key.
		12
		13	GETCODE Operator Retrieve code needed for eControl2 activation
		14
		15	Autodiscovery Query - scans network for all connected Crestron network devices
		16
		17	VERsion Operator Version Command
		18
		19	EST- shows IP Configurations of connected device (same command as ipconfig)
		20
		21	DHCP Administrator Enable/disable dynamic IP addressing
		22
		23	IPAddress Administrator Set IP address
		24
		25	IPCONFIG Operator Display/Configure IP Settings
		26
		27	IPMask Administrator Set IP Subnet Mask.
		28
		29	IPTable Operator Display IP Table
		30
		31	DEFRouter Administrator Set default router
		32
		33	ADDDns Administrator Add an entry to DNS server List
		34
		35
		36	ADDMaster Programmer Add a master entry to IP table
		37
		38	REMMaster Programmer Remove a master entry to IP table
		39
		40
		41	ADDSlave Programmer Add a slave entry to IP table
		42
		43	REMSlave Programmer Remove a slave entry to IP table
		44
		45
		46
		47	HELP - Detailed help available.
		48
		49	Type a command followed by a space and '?' to see options for that command (i.e. HELP ?)
		50
		51	HELP ALL will display a list of all commands.
		52
		53	HELP DEVice will display a list of commands specific to this device.
		54
		55	HELP ETHERnet will display a list of Ethernet commands.
		56
		57	HELP FILE will display a list of commands for file operations.
		58
		59	HELP SYStem will display a list of general system commands.
		60
		61	HELP RF will display a list of commands for the radio chip if available.
		62
		63	HELP OSD will display a list of commands for the on-screen-display if available.
		64
		65	HELP RAVA will display a list of commands for RAVA VOIP if available.
		66
		67	HELP BACNET will display a list of commands for the BACNET stack if available.
		68
		69	HELP USER will display a list of commands added to the system by user programs.
		70
		71	HELP CRESTIMERENG will display a list of commands for the Crestron Timer Engine.
		72
		73	HELP xxx* will display a list of commands starting with xxx.
		74
		75