Skip to Content

Wiki source code of Crestron Command Line

Version 8.1 by Craig Lewis on 2021/07/13 15:28
Show last authors
1 __**Frequently used commands:**__
2
3 SHOWLICENSE Operator Display list of licensed application(s)
4
5 SHOWLICENSEEX Operator Display list of licensed application(s)
6
7 SYSTEMKEY Administrator Display system key.
8
9 GETCODE Operator Retrieve code needed for eControl2 activation
10
11 Autodiscovery Query - scans network for all connected Crestron network devices
12
13 VERsion Operator Version Command
14
15 EST- shows IP Configurations of connected device (same command as ipconfig)
16
17 DHCP Administrator Enable/disable dynamic IP addressing
18
19 IPAddress Administrator Set IP address
20
21 IPCONFIG Operator Display/Configure IP Settings
22
23 IPMask Administrator Set IP Subnet Mask.
24
25 IPTable Operator Display IP Table
26
27 DEFRouter Administrator Set default router
28
29 ADDDns Administrator Add an entry to DNS server List
30
31
32 ADDMaster Programmer Add a master entry to IP table
33
34 REMMaster Programmer Remove a master entry to IP table
35
36
37 ADDSlave  Programmer Add a slave entry to IP table
38
39 REMSlave  Programmer Remove a slave entry to IP table
40
41
42
43 HELP - Detailed help available. 
44
45 Type a command followed by a space and '?' to see options for that command (i.e. HELP ?)
46
47 HELP ALL will display a list of all commands.
48
49 HELP DEVice will display a list of commands specific to this device.
50
51 HELP ETHERnet will display a list of Ethernet commands.
52
53 HELP FILE will display a list of commands for file operations.
54
55 HELP SYStem will display a list of general system commands.
56
57 HELP RF will display a list of commands for the radio chip if available.
58
59 HELP OSD will display a list of commands for the on-screen-display if available.
60
61 HELP RAVA will display a list of commands for RAVA VOIP if available.
62
63 HELP BACNET will display a list of commands for the BACNET stack if available.
64
65 HELP USER will display a list of commands added to the system by user programs.
66
67 HELP CRESTIMERENG will display a list of commands for the Crestron Timer Engine.
68
69 HELP xxx* will display a list of commands starting with xxx.
70
71