Wiki source code of Crestron Command Line
Version 3.1 by Craig Lewis on 2021/07/12 17:28
Hide last authors
| author | version | line-number | content |
|---|---|---|---|
 |
2.1 | 1 | Autodiscovery Query - scans network for all connected Crestron network devices |
| |
1.1 | 2 | |
| |
2.1 | 3 | Est - shows IP Configurations of connected device (same command as ipconfig) |
| |
1.1 | 4 | |
| |
2.1 | 5 | DHCP Administrator Enable/disable dynamic IP addressing |
| |
1.1 | 6 | |
| |
2.1 | 7 | IPAddress Administrator Set IP address |
| |
1.1 | 8 | |
| |
2.1 | 9 | IPCONFIG Operator Display/Configure IP Settings |
| 10 | |||
| 11 | IPMask Administrator Set IP Subnet Mask. | ||
| 12 | |||
| 13 | IPTable Operator Display IP Table | ||
| 14 | |||
| |
3.1 | 15 | DEFRouter Administrator Set default router |
| |
2.1 | 16 | |
| |
3.1 | 17 | ADDDns Administrator Add an entry to DNS server List |
| |
2.1 | 18 | |
| |
3.1 | 19 | |
| |
2.1 | 20 | ADDMaster Programmer Add a master entry to IP table |
| 21 | |||
| 22 | REMMaster Programmer Remove a master entry to IP table | ||
| 23 | |||
| 24 | |||
| 25 | ADDSlave Programmer Add a slave entry to IP table | ||
| 26 | |||
| 27 | REMSlave Programmer Remove a slave entry to IP table |