Skip to Content

Changes for page ZUM-HUB4 Processor Setup

Last modified by Craig Lewis on 2025/03/13 15:50
From version 7.1
edited by Alexander Mott
on 2022/06/30 17:43
Change comment: There is no comment for this version
To version 9.1
edited by Austin Weygandt
on 2022/07/29 17:25
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.alexander\.mott@chiefintegrations\.com
1 +XWiki.austin\.weygandt@chiefintegrations\.com
Content
... ... @@ -55,7 +55,7 @@
55 55  ***1*. If lighting devices must be able to communicate with the building LAN, run the command: ##isolatenetworks off##
56 56  * Once IP settings are configured, there are additional commands that must be run:
57 57  ** Disable CWS Anticsrf feature (case sensitive): ##cwsanticsrf OFF##
58 -** Force waiting to start program: ##startprografterrouter on##
58 +** Force waiting to start program: ##startprogafterrouter on##
59 59  ** Reboot the processor: ##reboot##
60 60  
61 61  === Update NVRAM Folder Permissions ===
... ... @@ -92,3 +92,6 @@
92 92  Due to Crestron's Zūm Program running in parallel with the SHOWRUNNER™ program, navigating to the processor's IP address in a web browser will no longer redirect you to the showrunnerHUB™ UI.
93 93  
94 94  Instead, you must add "/cws/showrunner/app" after the IP address in order to access the Web UI (e.g. [[https:~~/~~/100.64.0.1/cws/showrunner/app>>https://100.64.0.1/cws/showrunner/app]])
95 +
96 +ZUM-HUB4 Currently does NOT support XPANEL:
97 +The XPanel does not launch from the Showrunner HUB webpage. To access the XPanel, extract the VTZ file from the showrunner™ puf file and launch. Select Options>Host Settings and input the Host IP, IPID, Port 41794, check SSL, and Open. Type in the username and password and wait for the XPanel to connect.