Skip to Content

Changes for page ZUM-HUB4 Processor Setup

Last modified by Craig Lewis on 2025/03/13 15:50
From version 6.2
edited by Alexander Mott
on 2022/06/30 17:41
Change comment: There is no comment for this version
To version 8.1
edited by Craig Lewis
on 2022/07/01 16:08
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.alexander\.mott@chiefintegrations\.com
1 +XWiki.craig\.lewis@chiefintegrations\.com
Content
... ... @@ -61,7 +61,7 @@
61 61  === Update NVRAM Folder Permissions ===
62 62  
63 63  * Ensure that the NVRAM folder permissions are set correctly using a third party SFTP program:
64 -** FileZilla instructions (video example):
64 +** FileZilla instructions ([[video example>>attach:FileZilla HUB4 NVRAM Permissions Change.mp4]]):
65 65  *** Connect to the processor at port 22
66 66  *** Locate the "nvram" folder
67 67  *** Right click the folder and select "Change File Attributes"
... ... @@ -92,3 +92,6 @@
92 92  Due to Crestron's Zūm Program running in parallel with the SHOWRUNNER™ program, navigating to the processor's IP address in a web browser will no longer redirect you to the showrunnerHUB™ UI.
93 93  
94 94  Instead, you must add "/cws/showrunner/app" after the IP address in order to access the Web UI (e.g. [[https:~~/~~/100.64.0.1/cws/showrunner/app>>https://100.64.0.1/cws/showrunner/app]])
95 +
96 +ZUM-HUB4 Currently does NOT support XPANEL:
97 +The XPanel does not launch from the Showrunner HUB webpage. To access the XPanel, extract the VTZ file from the showrunner™ puf file and launch. Select Options>Host Settings and input the Host IP, IPID, Port 41794, check SSL, and Open. Type in the username and password and wait for the XPanel to connect.