Skip to Content

Changes for page ZUM-HUB4 Processor Setup

Last modified by Craig Lewis on 2025/03/13 15:50
From version 5.1
edited by Alexander Mott
on 2022/06/30 17:31
Change comment: There is no comment for this version
To version 8.1
edited by Craig Lewis
on 2022/07/01 16:08
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.alexander\.mott@chiefintegrations\.com
1 +XWiki.craig\.lewis@chiefintegrations\.com
Content
... ... @@ -61,7 +61,7 @@
61 61  === Update NVRAM Folder Permissions ===
62 62  
63 63  * Ensure that the NVRAM folder permissions are set correctly using a third party SFTP program:
64 -** FileZilla instructions:
64 +** FileZilla instructions ([[video example>>attach:FileZilla HUB4 NVRAM Permissions Change.mp4]]):
65 65  *** Connect to the processor at port 22
66 66  *** Locate the "nvram" folder
67 67  *** Right click the folder and select "Change File Attributes"
... ... @@ -92,3 +92,6 @@
92 92  Due to Crestron's Zūm Program running in parallel with the SHOWRUNNER™ program, navigating to the processor's IP address in a web browser will no longer redirect you to the showrunnerHUB™ UI.
93 93  
94 94  Instead, you must add "/cws/showrunner/app" after the IP address in order to access the Web UI (e.g. [[https:~~/~~/100.64.0.1/cws/showrunner/app>>https://100.64.0.1/cws/showrunner/app]])
95 +
96 +ZUM-HUB4 Currently does NOT support XPANEL:
97 +The XPanel does not launch from the Showrunner HUB webpage. To access the XPanel, extract the VTZ file from the showrunner™ puf file and launch. Select Options>Host Settings and input the Host IP, IPID, Port 41794, check SSL, and Open. Type in the username and password and wait for the XPanel to connect.
FileZilla HUB4 NVRAM Permissions Change.mp4
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.alexander\.mott@chiefintegrations\.com
Size
... ... @@ -1,0 +1,1 @@
1 +4.5 MB
Content