Skip to Content

Changes for page ZUM-HUB4 Processor Setup

Last modified by Craig Lewis on 2025/03/13 15:50
From version 40.1
edited by Alexander Mott
on 2024/12/02 19:06
Change comment: There is no comment for this version
To version 43.1
edited by Craig Lewis
on 2025/03/13 15:26
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.alexander\.mott@chiefintegrations\.com
1 +XWiki.craig\.lewis@chiefintegrations\.com
Content
... ... @@ -8,8 +8,10 @@
8 8  
9 9  {{error}}
10 10  **IMPORTANT:** When using ShowRunnerCLC™ with a ZUM-HUB4, **DO NOT** discover Zūm Rooms using the Crestron HUB4 Web UI. During discovery, the HUB4 will claim ZUMNET-JBOXs and prevent ShowRunnerCLC™ from auto-discovering or registering the Zūm hardware for itself.
11 +{{/error}}
11 11  
12 -Per Crestron's ZUM-HUB4 firmware v3.009.0039 release notes, updating to firmware versions 3.009.0039 or newer require first updating to 3.008.054. Failure to do so will result in longer ##progreset## times (up to 10 minutes) as well as other potential issues such as keypads becoming nonresponsive.
13 +{{error}}
14 +Per Crestron's ZUM-HUB4 firmware v3.009.0039 release notes, updating to firmware versions 3.009.0039 or newer require first updating to 3.008.054. Failure to do so will result in longer ##progreset## times (up to 10 minutes) as well as other potential issues such as keypads becoming unresponsive.
13 13  {{/error}}
14 14  
15 15  {{warning}}
... ... @@ -122,3 +122,9 @@
122 122  ZUM-HUB4 Currently does NOT support XPANEL:
123 123  The XPanel does not launch from the Showrunner HUB webpage. To access the XPanel, extract the VTZ file from the showrunner™ puf file and launch. Select Options>Host Settings and input the Host IP, IPID, Port 41794, check SSL, and Open. Type in the username and password and wait for the XPanel to connect.
124 124  ~{~{/error}}
127 +
128 += **Connecting ShowRunnerCLC™ to SSL Connects Devices** =
129 +
130 +Due to SSL Management, Processors and Secondary network hardware with SSL enabled will require CS Authentication to be enabled and setup.
131 +
132 +Follow these steps to setup [[SSL User Configuration>>doc:Main.SSL User Configuration]]