Skip to Content

Changes for page ZUM-HUB4 Processor Setup

Last modified by Craig Lewis on 2025/03/13 15:50
From version 36.1
edited by Alexander Mott
on 2024/03/27 15:51
Change comment: There is no comment for this version
To version 37.1
edited by Alexander Mott
on 2024/10/15 14:47
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,4 +1,4 @@
1 -(% class="box errormessage" %)
1 +(% class="box infomessage" %)
2 2  (((
3 3  This page is for ZUM-HUB4 deployments. For other processors, see our [[normal processor setup page>>doc:SHOWRUNNER™ Setup Guide.SHOWRUNNER™ Installation Guide.SHOWRUNNER™ Installation and Network Setup.Processor Setup.WebHome]].
4 4  )))
... ... @@ -5,9 +5,14 @@
5 5  
6 6  (% class="box errormessage" %)
7 7  (((
8 -**IMPORTANT:** When using ShowRunnerCLC™ with a ZUM-HUB4, **do not** discover Zūm Rooms using the Crestron HUB4 Web UI. During discovery, the HUB4 will claim ZUMNET-JBOXs and prevent ShowRunnerCLC™ from auto-discovering or registering the Zūm hardware for itself.
8 +**IMPORTANT:** When using ShowRunnerCLC™ with a ZUM-HUB4, **DO NOT** discover Zūm Rooms using the Crestron HUB4 Web UI. During discovery, the HUB4 will claim ZUMNET-JBOXs and prevent ShowRunnerCLC™ from auto-discovering or registering the Zūm hardware for itself.
9 9  )))
10 10  
11 +(% class="box errormessage" %)
12 +(((
13 +Per Crestron's ZUM-HUB4 firmware v3.009.0039 release notes, updating to firmware versions 3.009.0039 or newer require first updating to 3.008.054. Failure to do so will result in longer ##progreset## times (up to 10 minutes) as well as other potential issues such as keypads becoming nonresponsive.
14 +)))
15 +
11 11  (% class="box warningmessage" %)
12 12  (((
13 13  ZUM-HUB4 requires firmware version 2.006.0034 or greater for third party software to be loaded.