Skip to Content

Changes for page ZUM-HUB4 Processor Setup

Last modified by Craig Lewis on 2025/03/13 15:50
From version 30.1
edited by Alexander Mott
on 2023/05/23 17:09
Change comment: There is no comment for this version
To version 29.1
edited by Alexander Mott
on 2023/05/19 17:22
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -38,8 +38,8 @@
38 38  **** Set IP subnet mask: ##ipm 0 (% style="color:darkgoldenrod" %)**255.255.255.0**(%%)##
39 39  **** Set default gateway: ##defr 0 **10.0.0.1**##
40 40  **** Set hostname: ##host HUB4-CPP##
41 -**** Optionally, set secure gateway: ##securegateway default ##
42 -***** Note: this setting enables unsecure connections to the processor from the LAN. This is necessary if ZUMNET-JBOXs or other non-secure Crestron devices (such as 3-Series EISC) will be connected via the LAN port of the processor
41 +**** If ZUMNET-JBOXs or other non-secure Crestron devices such as 3-Series EISC will be connected via the LAN port, set secure gateway: ##securegateway default ##
42 +***** Note: this setting defines whether or not a secure connection is required on the LAN side of the control processor for Crestron devices
43 43  **** Reboot the processor: ##reboot##
44 44  *** If connecting lighting hardware to the Control Subnet port, then you may optionally configure the Control Subnet. If manually configuring the control subnet, we recommend the following IP range as it won't conflict with corporate networks:
45 45  **** Using the "Functions>Ethernet Addressing...>Control Subnet" menu of Toolbox: