Skip to Content

Changes for page ZUM-HUB4 Processor Setup

Last modified by Craig Lewis on 2025/03/13 15:50
From version 3.1
edited by Alexander Mott
on 2022/06/30 17:04
Change comment: There is no comment for this version
To version 4.1
edited by Mark Kohlmann
on 2022/06/30 17:13
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.alexander\.mott@chiefintegrations\.com
1 +XWiki.mark\.kohlmann@chiefintegrations\.com
Content
... ... @@ -32,14 +32,14 @@
32 32  **** Set IP subnet mask: ##ipm 0 (% style="color:darkgoldenrod" %)**255.255.255.0**(%%)##
33 33  **** Set default gateway: ##defr 0 **10.0.0.1**##
34 34  **** Set hostname: ##host HUB4-CPP##
35 -**** Set secure gateway: ##securegateway default##
35 +**** If ZUMNET-JBOXs will be connected via the LAN port set secure gateway: ##securegateway default ##(Note: this setting defines whether or not a secure connection is required on the LAN side of the control processor for Crestron devices)
36 36  **** Reboot the processor: ##reboot##
37 -*** If connecting lighting hardware to the Control Subnet port, then you must configure the Control Subnet:
37 +*** If connecting lighting hardware to the Control Subnet port, then you may configure the Control Subnet.  This is a recommended range as it won't conflict with corporate networks:
38 38  **** Using the "Functions>Ethernet Addressing...>Control Subnet" menu of Toolbox:
39 39  ***** Set routing to "Manual" with the start address and subnet size
40 -***** E.g., a setting of "10.0.0.0/24" will have the processor at 10.0.0.1 with an IP mask of 255.255.255.0 and a default gateway and DNS server at 10.0.0.2
41 -**** Using Text Console commands (example for a **10.0.0.0(% style="color:darkgoldenrod" %)/24(%%)** subnet, with a processor IP address of (% style="color:blue" %)**10.0.0.1**(%%))
42 -***** Set CS IP: ##csrouterprefix **10.0.0.0/24**##
40 +***** E.g., a setting of "100.64.0.0/20" will have the processor at 10.64.0.1 with an IP mask of 255.255.240.0 and a default gateway and DNS server at 100.64.0.2
41 +**** Using Text Console commands (example for a **100.64.0.0(% style="color:darkgoldenrod" %)/20(%%)** subnet, with a processor IP address of (% style="color:blue" %)**100.64.0.1**(%%))
42 +***** Set CS IP: ##csrouterprefix **100.64.0.0/20**##
43 43  ***** Reboot the processor: ##reboot##
44 44  ** If the system is intended to connect to the building LAN:
45 45  *** The building LAN must be connected to ZUM-HUB4's LAN port
... ... @@ -46,8 +46,9 @@
46 46  *** The ZUM-HUB4's LAN IP settings should be configured per the building requirements
47 47  *** Any connected lighting hardware must either:
48 48  ***1. Be on the building LAN
49 -***1*. The ZUM-HUB4 LAN should be configured with a static IP
50 -***1*. Building network must be configured to allow communication between ZUM-HUB4 and all lighting devices
49 +***1*. The ZUM-HUB4 LAN should be configured with a static IP or DHCP reservation
50 +***1*. Building network must be configured to allow communication between ZUM-HUB4 and all lighting devices
51 +***1*. This requires: ##securegateway default##
51 51  ***1. Be connected to the Control Subnet port
52 52  ***1*. Control Subnet must be configured correctly (see above)
53 53  ***1*. If lighting devices must be able to communicate with the building LAN, run the command: ##isolatenetworks off##