Skip to Content

Changes for page ZUM-HUB4 Processor Setup

Last modified by Craig Lewis on 2025/03/13 15:50
From version 25.1
edited by Alexander Mott
on 2023/05/11 15:11
Change comment: There is no comment for this version
To version 30.1
edited by Alexander Mott
on 2023/05/23 17:09
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -5,8 +5,8 @@
5 5  
6 6  (% class="box warningmessage" %)
7 7  (((
8 -ZUM-HUB4 requires firmware version 2.005.0056 or greater for third party software to be loaded.
9 -(Once installed, running the "##ver##" command should report a FW version of 2.7100.00016 or greater.)
8 +ZUM-HUB4 requires firmware version 2.006.0034 or greater for third party software to be loaded.
9 +(Once installed, running the "##ver##" command should report a FW version of 2.8000.00009 or greater.)
10 10  )))
11 11  
12 12  {{box cssClass="floatinginfobox" title="**CONTENTS**"}}
... ... @@ -13,8 +13,6 @@
13 13  {{toc/}}
14 14  {{/box}}
15 15  
16 -(% class="row" %)
17 -(((
18 18  **Licensing tutorial:**
19 19  
20 20  //Note: Please use Chrome or Firefox to download the License from [[https:~~/~~/portal.chiefintegrations.com>>https://portal.chiefintegrations.com]].  Edge and Internet Explorer do not work properly.//
... ... @@ -21,6 +21,8 @@
21 21  
22 22  [[https:~~/~~/www.youtube.com/watch?v=H8CLZ7bp0eI>>url:https://www.youtube.com/watch?v=H8CLZ7bp0eI]]
23 23  
22 +{{display excludeFirstHeading="false" reference="SHOWRUNNER™ Setup Guide.SHOWRUNNER™ Installation Guide.SHOWRUNNER™ Installation and Network Setup.Processor Setup.WebHome" section="HErrorBroadcasting"/}}
23 +
24 24  = IP Configuration and Console Commands =
25 25  
26 26  * Connect to the ZUM-HUB4 via USB and create an admin-level CWS user
... ... @@ -38,8 +38,8 @@
38 38  **** Set IP subnet mask: ##ipm 0 (% style="color:darkgoldenrod" %)**255.255.255.0**(%%)##
39 39  **** Set default gateway: ##defr 0 **10.0.0.1**##
40 40  **** Set hostname: ##host HUB4-CPP##
41 -**** If ZUMNET-JBOXs or other non-secure Crestron devices such as 3-Series EISC will be connected via the LAN port, set secure gateway: ##securegateway default ##
42 -***** Note: this setting defines whether or not a secure connection is required on the LAN side of the control processor for Crestron devices
41 +**** Optionally, set secure gateway: ##securegateway default ##
42 +***** Note: this setting enables unsecure connections to the processor from the LAN. This is necessary if ZUMNET-JBOXs or other non-secure Crestron devices (such as 3-Series EISC) will be connected via the LAN port of the processor
43 43  **** Reboot the processor: ##reboot##
44 44  *** If connecting lighting hardware to the Control Subnet port, then you may optionally configure the Control Subnet. If manually configuring the control subnet, we recommend the following IP range as it won't conflict with corporate networks:
45 45  **** Using the "Functions>Ethernet Addressing...>Control Subnet" menu of Toolbox:
... ... @@ -84,7 +84,7 @@
84 84  
85 85  * Connect your computer to the same network as the processor. Make sure your computer’s IP settings are compatible with the lighting network and do not conflict with any devices already on the network
86 86  * Connect to the ZUM-HUB4 in Crestron Toolbox
87 -** Run the "##ver##" and verify that the reported firmware is v2.7100.00016 or greater
87 +** Run the "##ver##" and verify that the reported firmware is v2.8000.00009 or greater (**NOTE**: older firmware will report the license as "Canvas Control" rather than "ZumHubProgramming" and will not work)
88 88  ** Open the Functions>License Management... window
89 89  *** If "ZumHubProgramming" license is listed with "Expiration: Never", then the license has already been activated and this step is not necessary
90 90  ** Navigate to the Functions>License Management...>Add License tab
... ... @@ -109,4 +109,3 @@
109 109  
110 110  ZUM-HUB4 Currently does NOT support XPANEL:
111 111  The XPanel does not launch from the Showrunner HUB webpage. To access the XPanel, extract the VTZ file from the showrunner™ puf file and launch. Select Options>Host Settings and input the Host IP, IPID, Port 41794, check SSL, and Open. Type in the username and password and wait for the XPanel to connect.
112 -)))