Skip to Content

Changes for page GLPAC Expansion Setup

Last modified by Alexander Mott on 2023/12/12 00:02
From version 9.3
edited by Alexander Mott
on 2022/06/13 15:02
Change comment: There is no comment for this version
To version 10.1
edited by Alexander Mott
on 2022/06/13 15:03
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -48,7 +48,7 @@
48 48  Theoretically, GLPACs should be able to be configured over Ethernet using a computer that is running a DHCP server (or if they are on a network with a processor that has a control subnet or is running the [[SHOWRUNNER™ DHCP Server>>doc:SHOWRUNNER™ User Guide & Wiki.Troubleshooting.DHCP Server.WebHome]]). In practice, however, GLPACs will oftentimes fail to take an IP address from a DHCP server and still require manual configuration via USB.
49 49  
50 50  * Connect to the GLPAC via USB
51 -* Open Text Console and run the following commands to configure the GLPACs IP settings (example is for a GLPAC at (%% style="color:blue" %%)**10.0.0.11**(%%) on a (%% style="color:purple" %%)**10.0.0.0**(%%)(%% style="color:darkgoldenrod" %%)**/24**(%%) subnet with hostname **GLPAC-1**)
51 +* Open Text Console and run the following commands to configure the GLPACs IP settings (example is for a GLPAC at (% style="color:blue" %)**10.0.0.11**(%%) on a (% style="color:purple" %)**10.0.0.0**(%%)(% style="color:darkgoldenrod" %)**/24**(%%) subnet with hostname **GLPAC-1**)
52 52  ** Disable DHCP: ##dhcp off##
53 53  ** Set IP address: ##ipa 0 10.0.0.11##
54 54  ** Set IP subnet mask: ##ipm 0 255.255.255.0##