Skip to Content

Changes for page GLPAC Expansion Setup

Last modified by Alexander Mott on 2023/12/12 00:02
From version 8.1
edited by Alexander Mott
on 2022/06/10 21:02
Change comment: There is no comment for this version
To version 9.1
edited by Alexander Mott
on 2022/06/13 14:46
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -45,7 +45,7 @@
45 45  
46 46  === IP Configuration ===
47 47  
48 -Theoretically, GLPACs should be able to be configured over Ethernet using a computer that is running a DHCP server (or if they are on a network with a processor running the [[SHOWRUNNER™ DHCP Server>>doc:SHOWRUNNER™ User Guide & Wiki.Troubleshooting.DHCP Server.WebHome]]). In practice, however, GLPACs will oftentimes fail to take an IP address from a DHCP server and still require manual configuration via USB.
48 +Theoretically, GLPACs should be able to be configured over Ethernet using a computer that is running a DHCP server (or if they are on a network with a processor that has a control subnet or is running the [[SHOWRUNNER™ DHCP Server>>doc:SHOWRUNNER™ User Guide & Wiki.Troubleshooting.DHCP Server.WebHome]]). In practice, however, GLPACs will oftentimes fail to take an IP address from a DHCP server and still require manual configuration via USB.
49 49  
50 50  * Connect to the GLPAC via USB
51 51  * Open Text Console and run the following commands to configure the GLPACs IP settings (example is for a GLPAC at 10.0.0.11 on a 10.0.0.0/24 subnet with hostname "GLPAC-1")