Skip to Content

Changes for page GLPAC Expansion Setup

Last modified by Alexander Mott on 2023/12/12 00:02
From version 24.1
edited by Alexander Mott
on 2022/09/19 17:02
Change comment: Renamed back-links.
To version 25.1
edited by Alexander Mott
on 2022/09/19 18:28
Change comment: Renamed back-links.

Summary

Details

Page properties
Content
... ... @@ -49,7 +49,7 @@
49 49  
50 50  = IP Configuration =
51 51  
52 -Theoretically, GLPACs should be able to be configured over Ethernet using a computer that is running a DHCP server (or if they are on a network with a processor that has a control subnet or is running the [[SHOWRUNNER™ DHCP Server>>doc:SHOWRUNNER™ Setup Guide.Troubleshooting Guide.Software and Programming.Troubleshooting.DHCP Server.WebHome]]). In practice, however, GLPACs will oftentimes fail to take an IP address from a DHCP server and still require manual configuration via USB.
52 +Theoretically, GLPACs should be able to be configured over Ethernet using a computer that is running a DHCP server (or if they are on a network with a processor that has a control subnet or is running the [[SHOWRUNNER™ DHCP Server>>doc:SHOWRUNNER™ Setup Guide.Troubleshooting Guide.Advanced Tools.DHCP Server.WebHome]]). In practice, however, GLPACs will oftentimes fail to take an IP address from a DHCP server and still require manual configuration via USB.
53 53  
54 54  * Connect to the GLPAC via USB
55 55  * Open Text Console and run the following commands to configure the GLPACs IP settings (example is for a GLPAC at (% style="color:blue" %)**10.0.0.11**(%%) on a **10.0.0.0(% style="color:darkgoldenrod" %)/24(%%)** subnet with hostname (% style="color:purple" %)**GLPAC-1**(%%))