Skip to Content

Changes for page GLPAC Expansion Setup

Last modified by Alexander Mott on 2023/12/12 00:02
From version 17.1
edited by Alexander Mott
on 2022/06/13 15:53
Change comment: There is no comment for this version
To version 18.1
edited by Alexander Mott
on 2022/06/13 21:25
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -11,7 +11,7 @@
11 11  * The main SHOWRUNNER™ configuration file (SrConfig.json or CiLightingConfig.json)
12 12  * The job hardware takeoff (SRTakeoff.xlsx)
13 13  
14 -The IP address and IP-ID of each GLPAC is important to proper functionality. Unless otherwise requested, Chief Integrations will assign default IP addresses to all GLPACs on the job. These IP addresses are recorded in the provided hardware takeoff. If network requirements on the jobsite require changing the IP address of any GLPAC or the processor, then both the provided configuration file and load script will need to be updated with the new IP information.
14 +The IP address and IP-ID of each GLPAC is important to proper functionality. Unless otherwise requested, Chief Integrations will assign default IP addresses to all GLPACs on the job. These IP addresses are typically recorded in the provided hardware takeoff, or can be checked by running the ##ipt -t ##command from the processor after the configuration is loaded. DIN-CENCN-2's will typically have IP-IDs in the "##Dx##" range.. If network requirements on the jobsite require changing the IP address of any GLPAC or the processor, then both the provided configuration file and load script will need to be updated with the new IP information.
15 15  
16 16  **Using non-default GLPAC IP Addresses**
17 17