Skip to Content

Changes for page GLPAC Expansion Setup

Last modified by Alexander Mott on 2023/12/12 00:02
From version 13.1
edited by Alexander Mott
on 2022/06/13 15:09
Change comment: There is no comment for this version
To version 12.1
edited by Alexander Mott
on 2022/06/13 15:06
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -81,9 +81,9 @@
81 81  ** If prompted, click "Yes" to overwrite the device's IP Table
82 82  ** If prompted, click "Yes" to ignore that the program specifies a different model
83 83  * Wait for the GLPAC to finish rebooting and then connect via Text Console
84 -* In Text Console, send the following commands (example is for a processor at (% style="color:orange" %)**10.0.0.10**(%%) and a GLPAC with IP-ID (% style="color:darkgoldenrod" %)**B1**(%%)):
84 +* In Text Console, send the following commands (example is for a processor at 10.0.0.10 and a GLPAC with IP-ID B1):
85 85  ** Remove current IP Table entry: ##rems E0 10.44.5.55##
86 -** Update IP Table entry: ##adds (% style="color:darkgoldenrod" %)**B1**(%%) (% style="color:orange" %)**10.0.0.10**(%%) E0##
86 +** Update IP Table entry: ##adds B1 10.0.0.10 E0##
87 87  ** Reboot the GLPAC: ##reboot##
88 88  * Wait for the GLPAC to finish rebooting
89 89  * Connect to the processor via Text Console and run the command: ##ipt##