Skip to Content
Last modified by Alexander Mott on 2024/12/02 19:02
From version 1.2
edited by Alexander Mott
on 2024/10/24 17:30
Change comment: (Autosaved)
To version 2.1
edited by Alexander Mott
on 2024/10/24 17:33
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -44,6 +44,8 @@
44 44  * At this point, it is a good idea to [[update the device firmware>>doc:SHOWRUNNER™ Setup Guide.SHOWRUNNER™ Installation Guide.SHOWRUNNER™ Installation and Network Setup.Updating Firmware.WebHome]]
45 45  * Repeat for all CEN-IOs on the job
46 46  
47 +If setup has been done correctly and the ShowRunnerCLC™ program and configuration have already been loaded to the processor, then you should see the CEN-IO's IP-ID as online when you run the ##ipt## command on both the CEN-IO and the processor.
48 +
47 47  == Static Configuration ==
48 48  
49 49  (% class="box warningmessage" %)
... ... @@ -65,3 +65,5 @@
65 65  ** Reboot the CEN-IO: ##reboot##
66 66  * At this point, it is a good idea to [[update the device firmware>>doc:SHOWRUNNER™ Setup Guide.SHOWRUNNER™ Installation Guide.SHOWRUNNER™ Installation and Network Setup.Updating Firmware.WebHome]]
67 67  * Repeat for all CEN-IOs on the job
70 +
71 +If setup has been done correctly and the ShowRunnerCLC™ program and configuration have already been loaded to the processor, then you should see the CEN-IO's IP-ID as online when you run the ##ipt## command on both the CEN-IO and the processor.