Wiki source code of Zūm Discovery

Version 6.7 by Alexander Mott on 2022/09/22 23:57

Hide last authors
Alexander Mott 1.1 1 (% class="box warningmessage" %)
2 (((
Alexander Mott 5.2 3 This article is about automatically building a SHOWRUNNER™ configuration using the Zūm Discovery feature of SHOWRUNNER™. For instructions on configuring Zūm Wired rooms using the Crestron Zūm App, see [[this page>>SHOWRUNNER™ Setup Guide.Wiring Guide.Zūm Wired System Overview.Crestron Zūm App Overview.WebHome]].
Alexander Mott 1.1 4 For instructions on configuring Zūm Net devices using Crestron Toolbox, see [[this page>>doc:SHOWRUNNER™ Setup Guide.SHOWRUNNER™ Installation Guide.SHOWRUNNER™ Installation and Network Setup.ZUMNET-JBOX Setup.WebHome]].
5 )))
6
7 {{box cssClass="floatinginfobox" title="**CONTENTS**"}}
8 {{toc/}}
9 {{/box}}
10
11 (% class="row" %)
12 (((
Alexander Mott 6.1 13 If Zūm Wired or Wireless devices have been configured using Crestron's Zūm App, then it is possible to automatically build a SHOWRUNNER™ configuration file using the Zūm Discovery feature that is built into SHOWRUNNER™.
Alexander Mott 1.1 14
Alexander Mott 5.2 15 There are certain pre-requisites and limitations when building a SHOWRUNNER™ configuration this way, and it may sometimes be necessary make some adjustments to the final configuration, such as changing keypad types and moving loads between areas.
Alexander Mott 1.1 16
Alexander Mott 5.2 17 = Zūm Wired Discovery =
18
Alexander Mott 6.1 19 == Notes and Limitations ==
Alexander Mott 1.1 20
Alexander Mott 6.1 21 * SHOWRUNNER™ version 3.014 or newer required
Alexander Mott 6.2 22 * Zūm Wired firmware version 1.02.10 or greater required
23 * Disconnect from any ZUMNET devices you may be connected to in Toolbox prior to running the discovery commands
24 * Cresnet devices landed on Zūm Link will not be discovered (Crestron bug expected to be corrected in a future firmware release)
25 * One area will be created per ZUMNET-JBOX; if there are more areas than ZUMNET-JBOXs, additional areas must be created manually
Alexander Mott 6.1 26
Alexander Mott 6.2 27 == Steps ==
28
29 1.
30
Alexander Mott 5.2 31 = Zūm Wireless Discovery =
Alexander Mott 1.1 32
Alexander Mott 5.2 33 == Notes and Limitations ==
Alexander Mott 1.1 34
Alexander Mott 6.1 35 * Processor with SHOWRUNNER™ version 2.190 or newer must be running on the same network as the gateway(s) to be acquired
Alexander Mott 6.2 36 ** For SHOWRUNNER™ versions 3.014 and newer, replace ##sr discover zum## commands with ##sr discover zummesh##
Alexander Mott 6.1 37 * ZUM-NETBRIDGES must already be acquired to their respective gateway
38 * SHOWRUNNER™ will automatically address any ZUM-NETBRIDGES that do not need have addresses assigned, but will still honor any already addressed devices
39 * Disconnect from any RF gateways you may be connected to in Toolbox prior to running the discovery command
40 * Plug loads will not appear in the SHOWRUNNER™ UI
Alexander Mott 4.1 41 )))
Alexander Mott 1.1 42
Alexander Mott 3.1 43 (% class="box warningmessage" id="HCaution:" %)
44 (((
Alexander Mott 6.1 45 **Note:** SHOWRUNNER™ has two different approaches for Zūm Wireless Discovery
Alexander Mott 4.1 46
47 1. **Manual RF Gateway Assignment** - SHOWRUNNER™ can be told which gateways it should scan. Use this approach if you have gateways that are used by multiple systems on the same local network.
48 1. **Claim All RF Gateways** - SHOWRUNNER™ will find all CEN-GWEXERs [ZUMNET-GATEWAY] on the network and will claim them as its own. **DO NOT** use this method if there are gateways used by different SHOWRUNNER™ or other Crestron systems on the same local network.
Alexander Mott 3.1 49 )))
Alexander Mott 1.1 50
Alexander Mott 4.1 51 (% class="row" %)
52 (((
Alexander Mott 6.2 53 == Manual RF Gateway Assignment Instructions ==
Alexander Mott 1.1 54
Alexander Mott 5.1 55 Use this method if you have multiple SHOWRUNNER™ instances on the same network or have gateways used by other Crestron systems.
Alexander Mott 1.1 56
Alexander Mott 2.1 57 * Connect to the processor's console with Toolbox or your favorite SSH client.
Alexander Mott 4.1 58 * Type "//sr devmgr ethernet query//" and press enter. This queries the local network for RF Gateways.
59 * Type "//sr devmgr ethernet show devices//" and press enter. This displays all found Crestron ethernet devices.
Alexander Mott 5.1 60 * For each gateway that you'd like this instance of SHOWRUNNER™ to use, use the hostname from the table of found ethernet devices. For example if the gateway Hostname is CEN-GWEXER-9E6ADA type "//sr ethernet device claim CEN-GWEXER-9E6ADA//". SHOWRUNNER™ will auto-assign an IP-ID. After all gateways have been claimed by SHOWRUNNER™, proceed to the next step.
Alexander Mott 4.1 61 * Type "//sr discover zum false//" and press enter.
Alexander Mott 5.1 62 * Status messages and the results will be displayed on the console. The process should take about 3 minutes.
63 * When the discovery is finished type "//sr save//" and press enter to save the updated config. Due to an unknown quirk that we are looking into, SHOWRUNNER™ must be restarted to complete the acquire process.
64 * Type "//progreset//" and press enter to restart SHOWRUNNER™
65 * Once SHOWRUNNER™ has finished restarting type "//sr discover zum false//" and press enter. SHOWRUNNER™ will be able to acquire the loads attached to the Zūm rooms at this point.
66 * Once completed SHOWRUNNER™ is now ready for full Zūm control
Alexander Mott 2.1 67
Alexander Mott 6.2 68 == Claim All RF Gateways Instructions ==
Alexander Mott 2.1 69
Alexander Mott 5.1 70 Use this method when you have a single SHOWRUNNER™ instance on a local network with all gateways being used for SHOWRUNNER™.
Alexander Mott 2.1 71
72 * Connect to the processor's console with Toolbox or your favorite SSH client.
Alexander Mott 4.1 73 * Type "//sr discover zum true//" and press enter.
Alexander Mott 5.1 74 * Status messages and the results will be displayed on the console. The process should take about 3 minutes.
75 * When the discovery is finished type "//sr save//" and press enter to save the updated config. Due to an unknown quirk that we are looking into, SHOWRUNNER™ must be restarted to complete the acquire process.
76 * Type "//progreset//" and press enter to restart SHOWRUNNER™
77 * Once SHOWRUNNER™ has finished restarting type "//sr discover zum false//" and press enter. SHOWRUNNER™ will be able to acquire the loads attached to the Zūm rooms at this point.
78 * Once completed SHOWRUNNER™ is now ready for full Zūm control
Alexander Mott 2.1 79
80 == Examples ==
81
Alexander Mott 5.2 82 === Manual Example ===
Alexander Mott 4.1 83
84 {{{MC4>sr devmgr ethernet query
85 Ethrenet AutoDiscovery Result: AutoDiscoveryOperationSuccess
86 MC4>sr devmgr ethernet show devices
87
88 +--------------------+-------------------------------+-------------+-------+----------------------------------------------------------------------------------+
89 | Adapter | Hostname | IP Address | IP-ID | ID |
90 +--------------------+-------------------------------+-------------+-------+----------------------------------------------------------------------------------+
91 | EthernetLANAdapter | CI-SJC-CEN-CI3-1-COM3 | 10.44.5.20 | 00 | CEN-CI3-1-C3COM-3 [v1.1620.00000, #008436E2] type:1 |
92 +--------------------+-------------------------------+-------------+-------+----------------------------------------------------------------------------------+
93 | EthernetLANAdapter | SB-DIN-CENCN-2 | 10.44.5.81 | 00 | DIN-CENCN-2-POE [v1.3544.00006, #8AB25AA3] |
94 +--------------------+-------------------------------+-------------+-------+----------------------------------------------------------------------------------+
95 | EthernetLANAdapter | CEN-GWEXER-9E6ADA | 10.44.5.120 | 00 | CEN-GWEXER [v1.4230.00015, #848210AD] |
96 +--------------------+-------------------------------+-------------+-------+----------------------------------------------------------------------------------+
97
98 MC4>sr ethernet device claim CEN-GWEXER-9E6ADA
99 Claimed ethernet device: CEN-GWEXER-9E6ADA
100 MC4>Update request from IP-ID-30 in Program 01
101 MC4>sr discover zum false
102 Starting Zum Discovery without gateway claiming
103 MC4>Performing Discovery on 1 Gateways.
Alexander Mott 2.1 104 Evaluating 3 Devices on Gateway 30
105 Claiming ZUM-NETBRIDGE SN: 1726NEJ01096 from IP-ID: 30
106 Dev: ZUM-NETBRIDGE addrssing to RF ID: 03
107 Setting up RF Device 'ZUM-NETBRIDGE' on Gateway 30 at RF-ID 03
108 Claiming ZUM-NETBRIDGE SN: 1914NEJ03096 from IP-ID: 30
109 Dev: ZUM-NETBRIDGE addrssing to RF ID: 04
110 Setting up RF Device 'ZUM-NETBRIDGE' on Gateway 30 at RF-ID 04
111 Claiming ZUM-NETBRIDGE SN: 1914NEJ03098 from IP-ID: 30
112 Dev: ZUM-NETBRIDGE addrssing to RF ID: 05
113 Setting up RF Device 'ZUM-NETBRIDGE' on Gateway 30 at RF-ID 05
Alexander Mott 4.1 114 Querying cresnet
Alexander Mott 2.1 115 Discovering Zum Loads on 1 Gateways.
116 Discovering Zum Loads on 3 Devices.
117 NETBIRDGE: NewLoads: 0 ModifiedLoads: 0 RemovedLoads: 0
118 Device: ZUM Netbridge 30:03 at 30:03 discovery result: .
119 NETBIRDGE: NewLoads: 0 ModifiedLoads: 0 RemovedLoads: 0
120 Device: ZUM Netbridge 30:04 at 30:04 discovery result: .
121 NETBIRDGE: NewLoads: 0 ModifiedLoads: 0 RemovedLoads: 0
122 Device: ZUM Netbridge 30:05 at 30:05 discovery result: .
123 RF Gateways: 0
124 RF Devices: 3
125 New Loads: 0
126 Modified Loads: 0
127 Removed Loads: 0
128 Zum Discovery Finished
129 MC4>sr save
130 Saved config
131 MC4>progreset
132 ...
133 CI ShowRunner startup completed successfully in 8072ms
134 MC4>sr discover zum false
135 Starting Zum Discovery without gateway claiming
136 MC4>Notice: SimplSharpPro[App01] # 2020-07-21 22:19:46 # Recalling startup scenes (if applicable)
137 Performing Discovery on 1 Gateways.
138 Evaluating 3 Devices on Gateway 30
139 Claiming ZUM-NETBRIDGE SN: 1726NEJ01096 from IP-ID: 30
140 Dev: ZUMMESH-NETBRIDGE already claimed at RF ID: 03
141 Claiming ZUM-NETBRIDGE SN: 1914NEJ03096 from IP-ID: 30
142 Dev: ZUMMESH-NETBRIDGE already claimed at RF ID: 04
143 Claiming ZUM-NETBRIDGE SN: 1914NEJ03098 from IP-ID: 30
144 Dev: ZUMMESH-NETBRIDGE already claimed at RF ID: 05
145 Discovering Zum Loads on 1 Gateways.
146 Discovering Zum Loads on 3 Devices.
147 Evaluating Device: ZUM-BLE ShortAddress: FFFA Type: BLERadio
148 Evaluating Device: ZUM-JBOX-20A-PLUG ShortAddress: 0000 Type: PlugLoad
149 Evaluating Device: ZUM-KP10C-BATT ShortAddress: 52E5 Type: Keypad
150 Evaluating Device: ZUM-PIR-OCC-BATT ShortAddress: DAF1 Type: OccupancySensor
151 Evaluating Device: ZUM-JBOX-5A-LV ShortAddress: 92EF Type: DimmableLoad
152 Load: Load37615 Added
153 NETBIRDGE: NewLoads: 1 ModifiedLoads: 0 RemovedLoads: 0
154 Device: ZUM Netbridge 30:03 at 30:03 discovery result: .
155 Evaluating Device: ZUM-BLE ShortAddress: FFFA Type: BLERadio
156 Evaluating Device: ZUM-DALI ShortAddress: 740D Type: Unknown
157 Evaluating Device: ZUM-5A-LV ShortAddress: 0482 Type: DimmableLoad
158 Load: Load1154 Added
159 Evaluating Device: ZUM-JBOX-16A-LV ShortAddress: 0000 Type: DimmableLoad
160 Load: Load0 Added
161 Evaluating Device: ZUM-KP10C-BATT ShortAddress: D766 Type: Keypad
162 Evaluating Device: ZUM-OL-PHO-BATT ShortAddress: 95ED Type: Photocell
163 Evaluating Device: ZUM-PIR-OCC-BATT ShortAddress: 44C2 Type: OccupancySensor
164 Evaluating Device: ZUM-DALI-GROUP ShortAddress: 740D Type: Unknown
165 Evaluating Device: ZUM-DALI-GROUP ShortAddress: 740D Type: Unknown
166 NETBIRDGE: NewLoads: 2 ModifiedLoads: 0 RemovedLoads: 0
167 Device: ZUM Netbridge 30:04 at 30:04 discovery result: .
168 Evaluating Device: ZUM-BLE ShortAddress: FFFA Type: BLERadio
169 Evaluating Device: ZUM-SIM ShortAddress: 0000 Type: OccupancySensor, PartitionSensor
170 Evaluating Device: ZUM-JBOX-16A-LV ShortAddress: EBCF Type: DimmableLoad
171 Load: Load60367 Added
172 Evaluating Device: ZUM-JBOX-16A-LV ShortAddress: 3CC1 Type: DimmableLoad
173 Load: Load15553 Added
174 Evaluating Device: ZUM-JBOX-16A-LV ShortAddress: F94A Type: DimmableLoad
175 Load: Load63818 Added
176 NETBIRDGE: NewLoads: 3 ModifiedLoads: 0 RemovedLoads: 0
177 Device: ZUM Netbridge 30:05 at 30:05 discovery result: .
178 RF Gateways: 0
179 RF Devices: 3
180 New Loads: 6
181 Modified Loads: 0
182 Removed Loads: 0
Alexander Mott 4.1 183 Zum Discovery Finished}}}
Alexander Mott 2.1 184
Alexander Mott 5.1 185 === Claim All Example ===
Alexander Mott 2.1 186
Alexander Mott 4.1 187 {{{MC4>sr discover zum true
188 Starting Zum Discovery with gateway claiming
189 MC4>Found 1 Gateways to check.
190 Claimed Gateway SN: 1720JBH04269 at IP-ID: 30
191 Update request from IP-ID-30 in Program 01
192 Claimed 1 Gateways. Waiting for queries to finish.
193 Performing Discovery on 1 Gateways.
Alexander Mott 2.1 194 Evaluating 3 Devices on Gateway 30
195 Claiming ZUM-NETBRIDGE SN: 1726NEJ01096 from IP-ID: 30
196 Dev: ZUM-NETBRIDGE addrssing to RF ID: 03
197 Setting up RF Device 'ZUM-NETBRIDGE' on Gateway 30 at RF-ID 03
198 Claiming ZUM-NETBRIDGE SN: 1914NEJ03096 from IP-ID: 30
199 Dev: ZUM-NETBRIDGE addrssing to RF ID: 04
200 Setting up RF Device 'ZUM-NETBRIDGE' on Gateway 30 at RF-ID 04
201 Claiming ZUM-NETBRIDGE SN: 1914NEJ03098 from IP-ID: 30
202 Dev: ZUM-NETBRIDGE addrssing to RF ID: 05
203 Setting up RF Device 'ZUM-NETBRIDGE' on Gateway 30 at RF-ID 05
204 Discovering Zum Loads on 1 Gateways.
205 Discovering Zum Loads on 3 Devices.
206 NETBIRDGE: NewLoads: 0 ModifiedLoads: 0 RemovedLoads: 0
207 Device: ZUM Netbridge 30:03 at 30:03 discovery result: .
208 NETBIRDGE: NewLoads: 0 ModifiedLoads: 0 RemovedLoads: 0
209 Device: ZUM Netbridge 30:04 at 30:04 discovery result: .
210 NETBIRDGE: NewLoads: 0 ModifiedLoads: 0 RemovedLoads: 0
211 Device: ZUM Netbridge 30:05 at 30:05 discovery result: .
212 RF Gateways: 0
213 RF Devices: 3
214 New Loads: 0
215 Modified Loads: 0
216 Removed Loads: 0
217 Zum Discovery Finished
218 MC4>sr save
219 Saved config
220 MC4>progreset
221 ...
222 CI ShowRunner startup completed successfully in 8072ms
223 MC4>sr discover zum false
224 Starting Zum Discovery without gateway claiming
225 MC4>Notice: SimplSharpPro[App01] # 2020-07-21 22:19:46 # Recalling startup scenes (if applicable)
226 Performing Discovery on 1 Gateways.
227 Evaluating 3 Devices on Gateway 30
228 Claiming ZUM-NETBRIDGE SN: 1726NEJ01096 from IP-ID: 30
229 Dev: ZUMMESH-NETBRIDGE already claimed at RF ID: 03
230 Claiming ZUM-NETBRIDGE SN: 1914NEJ03096 from IP-ID: 30
231 Dev: ZUMMESH-NETBRIDGE already claimed at RF ID: 04
232 Claiming ZUM-NETBRIDGE SN: 1914NEJ03098 from IP-ID: 30
233 Dev: ZUMMESH-NETBRIDGE already claimed at RF ID: 05
234 Discovering Zum Loads on 1 Gateways.
235 Discovering Zum Loads on 3 Devices.
236 Evaluating Device: ZUM-BLE ShortAddress: FFFA Type: BLERadio
237 Evaluating Device: ZUM-JBOX-20A-PLUG ShortAddress: 0000 Type: PlugLoad
238 Evaluating Device: ZUM-KP10C-BATT ShortAddress: 52E5 Type: Keypad
239 Evaluating Device: ZUM-PIR-OCC-BATT ShortAddress: DAF1 Type: OccupancySensor
240 Evaluating Device: ZUM-JBOX-5A-LV ShortAddress: 92EF Type: DimmableLoad
241 Load: Load37615 Added
242 NETBIRDGE: NewLoads: 1 ModifiedLoads: 0 RemovedLoads: 0
243 Device: ZUM Netbridge 30:03 at 30:03 discovery result: .
244 Evaluating Device: ZUM-BLE ShortAddress: FFFA Type: BLERadio
245 Evaluating Device: ZUM-DALI ShortAddress: 740D Type: Unknown
246 Evaluating Device: ZUM-5A-LV ShortAddress: 0482 Type: DimmableLoad
247 Load: Load1154 Added
248 Evaluating Device: ZUM-JBOX-16A-LV ShortAddress: 0000 Type: DimmableLoad
249 Load: Load0 Added
250 Evaluating Device: ZUM-KP10C-BATT ShortAddress: D766 Type: Keypad
251 Evaluating Device: ZUM-OL-PHO-BATT ShortAddress: 95ED Type: Photocell
252 Evaluating Device: ZUM-PIR-OCC-BATT ShortAddress: 44C2 Type: OccupancySensor
253 Evaluating Device: ZUM-DALI-GROUP ShortAddress: 740D Type: Unknown
254 Evaluating Device: ZUM-DALI-GROUP ShortAddress: 740D Type: Unknown
255 NETBIRDGE: NewLoads: 2 ModifiedLoads: 0 RemovedLoads: 0
256 Device: ZUM Netbridge 30:04 at 30:04 discovery result: .
257 Evaluating Device: ZUM-BLE ShortAddress: FFFA Type: BLERadio
258 Evaluating Device: ZUM-SIM ShortAddress: 0000 Type: OccupancySensor, PartitionSensor
259 Evaluating Device: ZUM-JBOX-16A-LV ShortAddress: EBCF Type: DimmableLoad
260 Load: Load60367 Added
261 Evaluating Device: ZUM-JBOX-16A-LV ShortAddress: 3CC1 Type: DimmableLoad
262 Load: Load15553 Added
263 Evaluating Device: ZUM-JBOX-16A-LV ShortAddress: F94A Type: DimmableLoad
264 Load: Load63818 Added
265 NETBIRDGE: NewLoads: 3 ModifiedLoads: 0 RemovedLoads: 0
266 Device: ZUM Netbridge 30:05 at 30:05 discovery result: .
267 RF Gateways: 0
268 RF Devices: 3
269 New Loads: 6
270 Modified Loads: 0
271 Removed Loads: 0
272 Zum Discovery Finished
Alexander Mott 4.1 273 }}}
Alexander Mott 1.1 274 )))